52421 SOLID STATE THERMOSTAT CONTROLLER Space Application Series... Features: • • • • Mii HYBRID MICROELECTRONICS PRODUCTS DIVISION Applications: Operates With RTD Temperature Sensor Output Is Either “ON” Or “OFF” Standard And Custom Factory Settings Of: - Resistance Control Set Points (Temperatures), - Hysteresis, (Minimum/Maximum) And - Timing (On/Off Delays) Test (Load Power On/Off) Capability Optional Mounting Configurations Available Meets The Demanding Requirements Of Space Platform Environments, Where Precise Temperature Control Is Required. DESCRIPTION Micropac’s Space level Thermostat Controller 52421 operates with external RTD (Resistance Temperature Device) temperature sensor and provides a power switched (On / Off) output within a temperature window. The RTD sensor is conditioned then controls a high-side MOSFET power switch for an external HEATER. Models are available with dual channels providing either “OR” or “AND” configurations. Wired combinations of the “OR” configuration device, along with a single channel device, provides a tri-redundancy control system which guarantees both the power ON and power OFF states of the Heater ABSOLUTE MAXIMUM RATINGS Operating Temperature (TA) ........................................................................................................................ -55°C to +125°C Storage Temperature (TSTG) ....................................................................................................................... -65°C to +165°C Maximum Steady State VIN .............................................................................................................................. +132 Volts DC Peak Transient Input VIN(T) ........................................................................................................... +180 Volts DC for 5 Secs. Steady State Load Current…(Source or Sink) ......................................................................................................1.1Amps. APPLICABLE QUALITY STANDARDS OF MICROPAC INDUSTRIES, INC. • • • • MIL-PRF-38534 Class H and Class K Qualified. MIL-PRF-19500 JAN S Qualified. MIL-STD-883 Test Methods and Procedures ISO 9001 Quality Standard Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 12/18/01 52421 SOLID STATE THERMOSTAT CONTROLLER GENERAL ELECTRICAL SPECIFICATIONS (25°C unless otherwise stated) TEST Quiescent Power Supply Current Over voltage Current Spikes Heater Current Output Off Current Full Load Saturation Voltage Self Test Input Impedance On Time, Load Current Off Time, Load Current CONDITIONS Terminal #1 = +126 VDC ILOAD (Terminals 3 and 4) = 0 A RTD = Max Between Terminals #1 and #2 = +180 VDC For 5 seconds RTD = Min Terminals #3 - #4 = Heater Load Terminal #1 = +120 VDC Terminal #1 = +126 VDC Between Terminals #3 and #4 = R shunt ≤ 10 ohms RTD = Max TCASE = 25°C TCASE = 125°C or TCASE = -55°C Terminal #1 = +120 VDC Test Load, 120 ohms ±5%, 250 Watts RTD = Min VSAT, Measured between Terminals #4 and #2 TCASE = 25°C TCASE = 125°C or TCASE = -55°C Terminal #1 = +120 VDC RTD = Max As Measured between Terminals #8 and #9 Terminal #1 = +120 VDC RTD switched Max to Min Measuring the 10-90 time of the rising Heater Load Current, Terminals #3 and #4 Terminal #1 = +120 VDC RTD switched Min to Max Measuring the 90-10 time of the falling Heater Load Current, Terminals #3 and #4 MIN MAX UNITS 5.5 mA 50.0 mA 1.1 A ±250 ±1 uA mA 1.9 2.8 V V 5,000,000 Ω 1.0 mS 2.0 mS Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 12/18/01 52421 SOLID STATE THERMOSTAT CONTROLLER DUAL CHANNEL TERMINAL NUMBER DESCRIPTION TERMINAL 1 2 3 4 5 6 7 8 9 REF Vin AGND +H -H RTD1-H RTD1-L RTD1-S ST1 ST1 Return DESCRIPTION Positive power supply voltage Power return for all function Current source for Heater (High Side) Current return for Heater Current source for RTD #1 Current return RTD #1 for RTD #1 Shield to case Self Test #1, “ON” Self test #1 Common Package Dimensions TYPICAL PRESET “RTD” PROFILES AVAILABLE P/N TBD -80°F -73°F Ton Toff Ton Toff P/N TBD -70°F -63°F P/N TBD -28°F -21°F P/N TBD -10°F -3°F P/N TBD -60°F -53°F P/N TBD 0°F 7°F P/N TBD -50°F -43°F P/N TBD -42°F -35°F P/N TBD 23°F 30°F RTD SENSORS NOT PROVIDED BY Micropac Industries, Inc. The above preset thresholds and switching levels are based on the use of standard 1000 ohm RTDs. Example: IEC-751, 1000 ohms at 0°C (ice point), resistance curve with an alpha of 0.003891 and with an error not to exceed 0.75 °F. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 12/18/01 52421 SOLID STATE THERMOSTAT CONTROLLER Functional Block Diagram +120Vdc 1 FILTER 0Vdc 2 5 7 SELF TEST POWER XISTOR BRIDGE/ CONTROLLER 6 T VOLTAGE REFERENCE SELF TEST DRIVER 11 3 10 4 CASE ` Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 12/18/01