61084 Mii SURFACE MOUNT (NPN) GENERAL PURPOSE TRANSISTOR (2N2222AUA) OPTOELECTRONIC PRODUCTS DIVISION Features: Applications • • • • • • • • Hermetically sealed Miniature package to minimize circuit board area Ceramic surface mount package MIL-PRF-19500 screening available Analog switches Signal conditioning Small signal amplifiers High density packaging DESCRIPTION The 61084 is a hermetically sealed ceramic surface mount general purpose switching transistor. This miniature ceramic package is ideal for designs where board space and device weight are important requirements. This device is available custom binned to customer specifications or screened to MIL-PRF-19500. ABSOLUTE MAXIMUM RATINGS Collector-Base Voltage ........................................................................................................................................................... 75V Collector-Emitter Voltage........................................................................................................................................................ 50V Emitter-Collector Voltage.......................................................................................................................................................... 6V Continuous Collector Current ............................................................................................................................................800mA Power Dissipation (Derate at the rate of 3.33 mW/°C above 25°C) ...............................................................................500mW Maximum Junction Temperature...................................................................................................................................... +200°C Operating Temperature (See part selection guide for actual operating temperature) ......................................-65°C to +200°C Storage Temperature......................................................................................................................................... -65°C to +200°C Lead Soldering Temperature (vapor phase reflow for 30 seconds) ................................................................................. 215°C Package Dimensions Schematic Diagram 1 0.225 [5.72] 0.215 [5.46] 0.155 [1.40] 0.145 [3.68] PIN 1 IDENTIFIER 0.028 [0.17] 0.022 [0.56] C 0.075 [1.91] 0.061 [1.55] 1 2 4 3 0.048 [1.22] 0.032 [0.81] 3 PL 0.055 [1.40] 0.045 [1.14] 0.088 [2.24] 0.072 [1.83] E B 3 2 MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 8-4 61084 SURFACE MOUNT NPN GENERAL PURPOSE TRANSISTOR (TYPE 2N2222AUA) ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER SYMBOL MIN MAX BVCBO BVCEO BVEBO ICBO Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Base Cutoff Current UNITS TEST CONDITIONS 75 V IC = 10µA, IE = 0 50 V IC = 10mA, IB = 0µA 6 V IC = 0, IE = 10µA 10 nA VCB = 60V, IE = 0 10 µA VCB = 60V, IE = 0, TA = 150°C 50 nA VCE = 50V 10 nA VEB = 4.0V, IC = 0 - VCE = 10V, IC = 0.1mA - VCE = 10V, IC = 1mA - VCE = 10V, IC = 10mA - VCE = 10V, IC = 150mA 1 1 ICES IEBO Collector-Emitter Cutoff Current Emitter-Base Cutoff Current Forward-Current Transfer Ratio hfe1 50 hfe2 75 hfe3 100 hfe4 100 hfe5 30 - VCE = 10V, IC = 500mA hfe6 35 - VCE = 10V, IC = 1mA @ -55°C 0.30 V IC = 150mA, IB =15mA 1 1.0 V IC = 500, IB = 50mA 1 1.20 V IC = 150mA, IB = 15mA 1 2.0 V IC = 500mA, IE = 50mA 1 VCE (SAT) Collector-Emitter Saturation Voltage VBE (SAT) Base-Emitter Saturation Voltage NOTE 0.6 325 300 SMALL-SIGNAL CHARACTERISTICS Small Signal Forward Current Transfer Ratio hfe 50 - VCE = 10V, IC = 1mA, f = 1kHz Small Signal Forward Current Transfer Ratio hfe 2.5 - VCE = 20V, IC = 20mA, f = 100kHz Open Circuit Output Capacitance COBO 8 pF VCB = 10V, 100kHz, < f < 1 MHz Input Capacitance (Output Open Capacitance) CIBO 25 pF VEB = 0.5 V, 100kHz, < f < 1 MHz Turn-On Time ton 35 ns VCC = 30V, IC = 150mA, Turn-Off Time toff 300 ns VCC = 30V, IC = 150mA, IB1 = 15mA IB1 = IB2 = 15mA NOTES: 1. Pulse width < 300µs, duty cycle < 2.0%. RECOMMENDED OPERATING CONDITIONS: PARAMETER Bias Voltage-Collector/Emitter Collector-Emitter Voltage SYMBOL MIN MAX UNITS IC 10 150 mA VCE 5 20 V SELECTION GUIDE PART NUMBER 61084-001 61084-002 61084-101 61084-102 61084-300 PART DESCRIPTION 2N2222AUA PNP transistor, commercial version 2N2222AUA PNP transistor, JAN level screening 2N2222AUA PNP transistor, JANTX level screening 2N2222AUA PNP transistor, JANTXV level screening 2N2222AUA PNP transistor, JANS level screening MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 8-5