PRODUCT INFORMATION 4D470 840nm LI Parallel Datacom, Telecom PIN Array This device consists of a 4-channel PIN Photodiode array in a miniature surface-mountable MT package. It is based on a unique combination of selfalignment technology and direct optical coupling to fiber, resulting in optimum coupling efficiency without need for active alignment. Applications include parallel Fibre Channel and optical interconnect inter/intra-board. And it matches the 4D469 VCSEL Array. PRE Optical and Electrical Characteristics PARAMETER SYMBOL /b RY A N MI MIN. TYP. MAX. (25° C Case Temperature) UNIT TEST CONDITION Responsivity R 0.45 A/W l=850nm Bandwidth (3dBel ) fc 2 GHz RL=50V Capacitance C 1 pF f=1MHz Dark Current Id 0.4 nA Crosstalk X -30 dBel l=850nm (Note 1) Test Condition: VR=3.3V or 5V. Fiber Ribbon: 50/125 GI, NA=0.2 or 62.5/125 GI, NA=0.275. Note 1: Crosstalk between adjacent channels operating at 2GHz. Absolute Maximum Ratings PARAMETER SYMBOL LIMIT Storage Temperature Tstg -40 to +858C Operating Temperature Top 0 to +708C Reverse Voltage VR 20V Soldering Temperature (2mm from the case for 10 sec) Tsld 2608C Thermal Characteristics METAL SHIELD CATHODE PARAMETER SYMBOL Temperature Coefficient - Dark Current dId/dTj MIN. TYP. 5 MAX. UNIT %/8C CATHODE ANODES All dimensions in mm FRONT VIEW METAL SHIELD MT GUIDE PINS HEAT SINK LEADS SIDE VIEW The cathode is connected to the metal shield PIN Array in MT Package 13628.11 1999-01-13 Europe: Tel (46) 8 58 02 45 00 Fax (46) 8 58 02 01 10 Tel (44) 1291 436180 Fax (44) 1291 436771 America: Tel 1-800-96MITEL Fax (613) 592-6909 Asia: Tel (65) 293 5312 Fax (65) 293 8527 http://www.mitelsemi.com World Headquarters - Canada Tel: +1 (613) 592 2122 Fax: +1 (613) 592 6909 North America Tel: +1 (770) 486 0194 Fax: +1 (770) 631 8213 Asia/Pacific Tel: +65 333 6193 Fax: +65 333 6192 Europe, Middle East, and Africa (EMEA) Tel: +44 (0) 1793 518528 Fax: +44 (0) 1793 518581 South America Tel/Fax: +55 (48) 225 2061 Preliminary and Advance Data/Information: Some datasheets carry the designation “Preliminary” or “Advance”. Preliminary Information represents the design objective for a device type in development and may be revised without notice before the device reaches production. Advance Information is intended for design guidance purposes and refers to a device type in early production where device characterization is ongoing and information is still subject to change without notice. Current information on the status of Preliminary or Advance programs may be obtained from Mitel Sales Offices, Representatives or Distributors. Information relating to products and circuits (“Product”) furnished herein by Mitel Corporation or its subsidaries (“Mitel”) is believed to be reliable. However, Mitel assumes no liability for errors that may appear in this document, or for liability otherwise arising from the application or use of any such information or Product or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or the purchase of Product conveys any license, either expressed or implied, under patents or other intellectual property rights owned by Mitel or licensed from third parties by Mitel, whatsoever. Purchasers of Products are also hereby notified that the use of Product in certain ways or in combination with Mitel or non-Mitel furnished goods or services may infringe patents or intellectual property rights owned by Mitel. The Products, their specifications and the information appearing in the document are subject to change by Mitel without notice. M Mitel (design) and ST-BUS are registered trademarks of MITEL Corporation Mitel Semiconductor is an ISO 9001 Registered Company © Copyright MITEL 1999 All Rights Reserved TECHNICAL DOCUMENTATION – NOT FOR RESALE All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners. http://www.mitelsemi.com World Headquarters - Canada Tel: +1 (613) 592 2122 Fax: +1 (613) 592 6909 North America Tel: +1 (770) 486 0194 Fax: +1 (770) 631 8213 Asia/Pacific Tel: +65 333 6193 Fax: +65 333 6192 Europe, Middle East, and Africa (EMEA) Tel: +44 (0) 1793 518528 Fax: +44 (0) 1793 518581 Information relating to products and services furnished herein by Mitel Corporation or its subsidiaries (collectively “Mitel”) is believed to be reliable. However, Mitel assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Mitel or licensed from third parties by Mitel, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Mitel, or non-Mitel furnished goods or services may infringe patents or other intellectual property rights owned by Mitel. This publication is issued to provide information only and (unless agreed by Mitel in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Mitel without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user’s responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Mitel’s conditions of sale which are available on request. M Mitel (design) and ST-BUS are registered trademarks of MITEL Corporation Mitel Semiconductor is an ISO 9001 Registered Company Copyright 1999 MITEL Corporation All Rights Reserved Printed in CANADA TECHNICAL DOCUMENTATION - NOT FOR RESALE