NAIS AQH2223

VDE
VDE
Pending
(AQH1213, AQH1223, AQH2213, AQH2223) (AQH0213, AQH0223, AQH3213, AQH3223)
AQ-H
RELAYS
AQ-H SOLID STATE RELAY
FEATURES
–
1
+
2
–
3
–
4
–
8 1
+
2
–
6 3
–
5 4
ZC
Zero-cross
circuit
1. Compact DIP type SSR that’s ideal
for AC load control
2. Supports 0.3 A, 0.6 A, 0.9 A and 1.2 A
ON-state RMS currents.
3. The 1.2 A type saves space with a
DIP 8-pin package. (Competitor only
provides a 16-pin type.)
8
9.78
.385
6
6.4
.252
5
DIP8
DIP16
19.82
.780
(mm inch)
4. Only ours handles both 100 and 200
V AC loads
This relay handles both voltages in a
single product. It is not necessary for
users that use both types to manage
separate part numbers.
5. High dielectric strength: 5,000 V AC
(between input and output)
6. Two types available: Zero-cross type
and Non-zero-cross type
TYPICAL APPLICATIONS
1. Home appliances (air conditioners,
microwave ovens, washing machines,
personal hygiene systems,
refrigerators, fan heaters, inductive
heating cooker, and water heaters,
etc.)
2. Industrial equipment market.
TYPES
Part No.
Output rating*
Type
Through hole
terminal
Type
Repetitive
ON-state
peak OFFRMS current
state voltage
AC
type
600 V
0.3 A
0.6 A
0.9 A
1.2 A
0.3 A
0.6 A
0.9 A
1.2 A
Tube packing style
Zero-cross
Non zero-cross
AQH0213
AQH1213
AQH2213
AQH3213
AQH0223
AQH1223
AQH2223
AQH3223
Packing quantity
Surface-mount terminal
AQH0213A
AQH1213A
AQH2213A
AQH3213A
AQH0223A
AQH1223A
AQH2223A
AQH3223A
Tape and reel packing style
Tape and
Tube
Picked from the Picked from the
reel
1/2/3/4-pin side 5/6/8-pin side
AQH0213AX
AQH0213AZ
AQH1213AX
AQH1213AZ
AQH2213AX
AQH2213AZ
1 tube contains
AQH3213AX
AQH3213AZ
40 pcs.
1,000 pcs.
AQH0223AX
AQH0223AZ 1 batch contains
400 pcs.
AQH1223AX
AQH1223AZ
AQH2223AX
AQH2223AZ
AQH3223AX
AQH3223AZ
*Indicate the repetitive peak OFF-state voltage and ON-state RMS current: peak AC.
Note: For space reasons, the SMD terminal shape indicator “A” and the package type indicator “X” and “Z” are omitted from the seal.
RATING
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Input
Item
LED forward current
LED reverse voltage
Peak forward current
Repetitive peak OFF-state votage
Output ON-state RMS current
Non-repetitive surge current
I/O isolation voltage
Temperature limits
Symbol AQH0213 AQH0223 AQH1213 AQH1223 AQH2213 AQH2223 AQH3213 AQH3223
IF
50 mA
VR
6V
IFP
f = 100 Hz,
Duty Ratio = 0.1%
1A
VDRM
IT(RMS)
ITSM
Viso
Remarks
600 V
0.3 A
3A
0.6 A
6A
0.9 A
9A
1.2 A
12 A
60Hz, 1 cycle
5,000 V AC
Operating
Topr
–30°C to +85°C –22°F to +185°F
Storage
Tstg
–40°C to +125°C –40°F to +257°F
AQ-H SOLID STATE RELAY
ASCT1B272E ’03.7
http://www.naisrelay.com/
Non-condensing at
low temperatures
New
1
AQ-H
2. Electrical characteristics (Ambient temperature: 25°C 77°F)
Item
Symbol AQH0213 AQH1213 AQH2213 AQH3213 AQH0223 AQH1223 AQH2223 AQH3223
LED dropout voltage
Input
LED reverse current
Peak OFF-state
current
Output
Peak ON-state
voltage
Holding current
Critical rate of rise of
OFF-state voltage
Transfer
characteristics
Typical
Maximum
Typical
Maximum
Typical
Maximum
Typical
Maximum
Typical
Maximum
1.18 V
1.3 V
—
10 µA
—
VF
IR
IDRM
IF = 10 mA
VR = 6 V
IF = 0 mA
VDRM = 600 V
100 µA
—
VTM
IF = 10 mA
ITM = Max.
2.5 V
—
25 mA
IH
dv/dt
200 V/µs
Trigger LED current* Maximum
IFT
10 mA
Zero-cross voltage**
Maximum
VZC
Turn on time***
Maximum
TON
10 µs
I/O isolation
resistance
Minimum
Riso
50 GΩ
Minimum
Condition
VDRM = 600 V ×1/M2
50 V
VD = 6 V
RL = 100 Ω
IF = 10 mA
IF = 20 mA
VD = 6 V
RL = 100 Ω
—
500 V DC
Notes: *Recommended LED current IFT: 20 mA
**Applicable part No.: AQH0213, AQH1213, AQH2213 and AQH3213.
***Turn on time
Input
90%
Output
Ton
DIMENSIONS
mm inch
Through hole terminal type
Surface mount terminal type
MAX.10°
PC board pattern
(BOTTOM VIEW)
7.62
.300
8-0.8 dia. hole
8-.031 dia. hole
MAX. 10°
6.4
.252
6.4
.252
7.62
.300
7.62
.300
2.54
.100
6.4
.252
7.62
2.54 .300
.100
MAX. 10°
1
3.4
.134
9.78
.385
9.78
.385
3.4
.134
3.9±0.2
.154±.008
0.2
.008
3.0
.118
0.5
.020
1.2
.047
3.4
.134
0.5
0.5 .020
.020 1.2
1.2 .047
.047
0.5
.020
1.2
.047
+0.2
–0
+.008
–0
0.5
0.5 .020 0.5
.020
.020
1.2
1.2
.047 1.2
.047
.047
0.5
.020
1.2
.047
2.54 2.54 2.54
.100 .100 .100
2
Recommended mounting pad
(TOP VIEW)
8.3
.327 1.9
.075
1.5
.059
2.54 2.54 2.54
.100 .100 .100
Terminal thickness: 0.25 .010
General tolerance: ±0.1 ±.004
Tolerance: ±0.1 ±.004
Terminal thickness: 0.25 .010
General tolerance: ±0.1 ±.004
2.54 2.54 2.54
.100 .100 .100
Tolerance: ±0.1 ±.004
AQ-H
SCHEMATIC AND WIRING DIAGRAMS
Notes: E1: Power source at input side; IF: Trigger LED forward current; VL: Load voltage; IL: Load current;
Schematic
–
1
+
2
–
3
–
4
Output configuration
Load
Wiring diagram
2
E1
Load
8
1
8
IL
IF 3
6
4
5
1
8
IL
VL (AC)
6
ZC
Zero-cross
circuit
VL (AC)
Load
5
1a
–
1
+
2
–
3
–
4
AC
8
2
E1
6
Load
IL
IF 3
6
4
5
IL
VL (AC)
VL (AC)
Load
5
REFERENCE DATA
1. ON-state RMS current vs. Ambient
temperature characteristics
2. On voltage vs. Ambient temperature
characteristics
3. Trigger LED current vs. Ambient temperature
characteristics
Allowable ambient temperature:
–30°C to +85°C –22°F to +185°F
LED current: 10 mA; ON current: Max.
Measured portion: between terminals 6 and 8
Load voltage: 6 V DC;
Load resistance: 100Ω
0.6
0.3
1.4
AQH2213, AQH2223
AQH1213, AQH1223
0
20
AQH1213, AQH1223
1.2
AQH2213, AQH2223
1
0.8
40
60
0.6
–40 –30 –20
80 85 100
20
40
60
100
1.4
80
1.3
50mA
1.2
30mA
10mA
60
60
40
20
0
80 85
0
10
20
Ambient temperature, °C
30
40
50
40
60
80 85
6. Repetitive peak OFF-state current vs. Load
voltage characteristics
10–3
10–4
10–5
10–6
10–7
10–8
10–9
10–10
0
20
40
60
80
100
Load voltage, V
LED current, mA
7. Hold current vs. Ambient temperature
characteristics
20
LED current: 0 mA; Measured portion: between
terminals 6 and 8; Ambient temperature: 25°C 77°F
20mA
1.1
0
Ambient temperature, °C
Repetitive peak OFF-state current, A
1.5
40
0
–40 –30 –20
80 85
Load voltage: 6 V DC; Load resistance: 100Ω
Measured portion: between terminals 6 and 8
Turn on time, µs
LED dropout voltage, V
0
5. Turn on time vs. LED current characteristics
LED current: 10 to 50 mA
20
4
Ambient temperature, °C
4. LED dropout voltage vs. Ambient
temperature characteristics
0
6
2
Ambient temperature, °C
1
–40 –30 –20
8
AQH3213, AQH3223
AQH0213, AQH0223
0
–30 –20
AQH0213, AQH0223
Trigger LED current, mA
0.9
AQH3213, AQH3223
On voltage, V
ON-state RMS current, mA
1.2
10
1.6
1.5
8. Zero-cross voltage vs. Ambient temperature
characteristics
LED current: 10 mA
50
20
15
AQH1213, AQH1223
AQH2213, AQH2223
10
5
Zero-cross voltage, V
Hold current, mA
25
40
AQH0213, AQH1213,
AQH2213, AQH3213
30
20
10
AQH0213, AQH0223
AQH3213, AQH3223
0
–40 –30 –20
0
20
40
60
Ambient temperature, °C
80 85
0
–40 –30 –20
0
20
40
60
80 85
Ambient temperature, °C
3
AQ-H
CAUTIONS FOR USE
1. For cautions regarding use, please
refer to ’03-’04 Solid State Relays
catalog.
2. The internal IC could be damaged if
a short forms between the I/O
terminals while the solid state relay is
powered.
3. Output spike voltages
1) The figure below shows an ordinary
circuit. Please add a snubber circuit or
varistor, as noise/surge on the load side
could damage the unit or cause
malfunctions.
1
8
Load
2
VL(AC)
3
6
4
5
Note) Connection of an external resister, etc.,
to terminal No. 5 (gate) is not necessary.
2) Even if spike voltages generated at the
load are limited with a clamp diode if the
circuit wires are long, spike voltages will
occur by inductance. Keep wires as short
as possible to minimize inductance.
4. Ripple in the input power supply
1) For LED operate current at Emin,
maintain min. 10 mA
2) Keep the LED operate current at 50 mA
or less at Emax.
6. Cleaning
The solid state relay forms an optical path
by coupling a light-emitting diode (LED)
and photodiode via transparent silicon
resin.
For this reason, avoid ultrasonic cleansing
if at all possible.
We recommend cleaning with an organic
solvent. If you cannot avoid using
ultrasonic cleansing, please ensure that
the following conditions are met, and
check beforehand for defects.
• Frequency: 27 to 29 kHz
• Ultrasonic output: No greater than 0.25
W/cm2
• Cleaning time: No longer than 30
seconds
• Cleanser used: Asahiklin AK-225
• Other: Submerge in solvent in order to
prevent the PCB and elements from being
contacted directly by the ultrasonic
vibrations.
(2) Vapor phase soldering method
Note: Applies to unit area ultrasonic output for
ultrasonic baths.
(4) Soldering iron method
Tip temperature: 280 to 300°C 536 to
572°F
Wattage: 30 to 60 W
Soldering time: within 5 seconds
(5) Others
Check mounting conditions before using
other soldering methods (hot-air, hot
plate, pulse heater, etc.)
• The temperature profile indicates the
temperature of the soldered terminal on
the surface of the PC board. The ambient
temperature may increase excessively.
Check the temperature under mounting
conditions.
• The conditions for the infrared reflow
soldering apply when preheating using
the VPS method.
7. Soldering
1) When soldering PC board terminals,
keep soldering time to within 10 s at
260°C 500°F.
2) When soldering surface-mount
terminals, the following conditions are
recommended.
(1) IR (Infrared reflow) soldering method
T3
Emin.
T2
Emax.
T1
5. When soldering terminals, keep
soldering time to within 10s at 260°C
500°F
t1
t2
T1 = 155 to 165°C 311 to 329°F
T2 = 180°C 200°C 356 to 392°F
T3 = 245°C 473°F or less
t1 = 120 s or less
t2 = 30 s or less
T2
T1
t1
t2
T1 = 180 to 200°C 366 to 392°F
T2 = 215°C 419°F or less
t1 = 40 s
t2 = 90 s or less (40 s: SOP type)
(3) Double wave soldering method
T2
T1
t1
t2
t3
T1 = 155 to 165°C 311 to 329°F
T2 = 260°C 500°F or less
t1 = 60 s or less
t2+t3 = 5 s or less
8. The following shows the packaging format
1) Tape and reel
Type
mm inch
Tape dimensions
0.3±0.05
.012±.002
8-pin SMD type
Tractor feed holes
–0
1.5 +0.1
dia.
.059 +.004
dia.
–0
21±0.8
.827±.031
80±1 dia.
3.150±.039 dia.
Direction of picking
4±0.1
10.1±0.1
.157±.004 .400±.004
1.75±0.1
.069±.004
2±0.5
.079±.020
7.5±0.1
.295±.004
16±0.3
.630±.012
Device mounted
on tape
4.5±0.3
.177±.012
Dimensions of paper tape reel
12±0.1
.472±.004
2±0.1
.079±.004
300±2 dia.
11.811±.079 dia.
80±1 dia.
3.150±.039 dia.
10.2±0.1
.402±.004
1.55±0.1 dia.
.061±.004 dia.
(1) When picked from 1/2/3/4-pin side: Part No. AQH❍❍❍❍AX (Shown above)
(2) When picked from 5/6/8-pin side: Part No. AQH❍❍❍❍AZ
13±0.5 dia.
.512±.020 dia.
17.5±2.0
.689±.079
4
2±0.5
.079±.020
AQ-H
2) Tube
Devices are packaged in a tube so pin No.
1 is on the stopper B side. Observe
correct orientation when mounting them
on PC boards.
(DIP type)
StopperB
StopperA
9. Transportation and storage
1) Extreme vibration during transport will
warp the lead or damage the relay.
Handle the outer and inner boxes with
care.
2) Storage under extreme conditions will
cause soldering degradation, external
appearance defects, and deterioration of
the characteristics. The following storage
conditions are recommended:
• Temperature: 0 to 45°C 32 to 113°F
• Humidity: Less than 70% R.H.
• Atomosphere: No harmful gasses such
as sulfurous acid gas, minimal dust.
5
AQ-H
Internet Homepage
North America : http://www.aromat.com/
Europe
: http://www.mew-europe.com/
Asia & others : http://www.nais-e.com/
• (Japanese) : http://www.mac-j.co.jp/
• (Chinese) : http://www.cmew.com.cn/
These materials are printed on ECF pulp.
These materials are printed with earth-friendly vegetable-based (soybean oil) ink.
Please contact ..........
Matsushita Electric Works, Ltd.
Automation Controls Company
Head Office: 1048, Kadoma, Kadoma-shi, Osaka 571-8686, Japan
Telephone: Japan (81) Osaka (06) 6908-1050
Facsimile: Japan (81) Osaka (06) 6908-5781
http://www.nais-e.com/
COPYRIGHT © 2003 All Rights Reserved
ARCT1B272E
200307-3YT
6
Specifications are subject to change without notice.
Printed in Japan.