NEC UPG2027TQ

DATA SHEET
NEC's L-BAND 4W
HIGH POWER SPDT SWITCH IC
FEATURES
•
DESCRIPTION
NEC's UPG2027TQ is a high power SPDT GaAs Switch IC
LOW INSERTION LOSS:
for digital cellular and cordless telephone applications. This
0.40 dB TYP. @ 1.0 GHz
device can operate from 500 MHz to above 2.0 GHz, with low
0.50 dB TYP. @ 2.0 GHz
•
UPG2027TQ
HIGH LINEARITY:
2f0, 3f0 = 70 dBc TYP. @ 1.0 GHz, Pin = +35 dBm
insertion loss and high linearity.
2f0, 3f0 = 70 dBc TYP. @ 2.0 GHz, Pin = +33 dBm
•
HIGH-DENSITY SURFACE MOUNTING:
10-pin plastic TSON package (2.30 × 2.55 × 0.60 mm)
•
Pb FREE
APPLICATIONS
• GSM Triple / Quad Band Cellular
• Cordless Phones
• Short Range Wireless
ORDERING INFORMATION
PART NUMBER
UPG2027TQ-E1-A
PACKAGE
10-pin plastic TSON
MARKING
2027
SUPPLYING FORM
• Embossed tape 8 mm wide
• Pins 5, 6 face the perforation side of the tape
• Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: UPG2027TQ-A
California Eastern Laboratories
UPG2027TQ
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
(Top View)
10
9
8
7
(Bottom View)
6
6
7
2
3
4
9
10
NC
2027
1
8
PIN NO.
5
5
4
3
2
1
ABSOLUTE MAXIMUM RATINGS (TA =+25ºC, unless otherwise specified)
PARAMETER
Control Voltage
Input Power
SYMBOL
RATINGS
UNIT
Vcont
+8.0
V
Pin
+38
dBm
Operating Ambient Temperature
TA
−45 to +85
°C
Storage Temperature
Tstg
−55 to +150
°C
RECOMMENDED OPERATING RANGE (TA =+25ºC)
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Control Voltage (High)
Vcont (H)
+2.5
+2.7
+5.0
V
Control Voltage (Low)
Vcont (L)
0
0
+0.2
V
PIN NAME
1
Vcont2
2
NC (GND)
3
Common
4
NC (GND)
5
Vcont1
6
RF1
7
NC (GND)
8
NC (GND)
9
NC (GND)
10
RF2
UPG2027TQ
ELECTRICAL CHARACTERISTICS (TA = +25°C, Vcont = +2.5 V/0 V, ZO = 50 Ω, DC blocking capacitors value: 56 pF,
Each port, unless otherwise specified)
PARAMETER
Insertion Loss
Isolation
2nd Harmonics
3rd Harmonics
SYMBOL
LINS
ISL
2f0
3f0
Switching Speed
tsw
Control Current
Icont
TEST CONDITIONS
MIN.
TYP.
MAX.
UNIT
f = 0.5 to 1.0 GHz
−
0.40
0.65
dB
f = 1.0 to 2.0 GHz
−
0.50
0.75
dB
f = 0.5 to 1.0 GHz
23
25
−
dB
f = 1.0 to 2.0 GHz
17
18.5
−
dB
f = 1.0 GHz, Pin = +35 dBm
65
70
−
dBc
f = 2.0 GHz, Pin = +33 dBm
65
70
−
dBc
f = 1.0 GHz, Pin = +35 dBm
65
70
−
dBc
f = 2.0 GHz, Pin = +33 dBm
65
70
−
dBc
−
1
5
μs
−
−
50
μA
No RF
UPG2027TQ
EVALUATION CIRCUIT
Off chip DC blocking capacitors value C1 = 56 pF, C2 = 1 000 pF (Bypass), using NEC standard evaluation board.
Vcont2
C1
C1
Common
Vcont1
2027
C2
C1
C2
RF2
RF1
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
TRUTH TABLE
Vcont2
RF2
NC (GND)
NC (GND)
Common
NC (GND)
NC (GND)
NC (GND)
Vcont1
VCONT1
VCONT2
RF1
COMMON-RF1
COMMON-RF2
High
Low
ON
OFF
Low
High
OFF
ON
UPG2027TQ
PACKAGE DIMENSIONS
(Bottom View)
0.18±0.05
(0.15)
(1.95)
(0.95)
2.25±0.1
(1.70)
2.20±0.1
(0.60 MAX.)
2.30±0.15
(0.125)
2.55±0.15
(0.05)
0.40±0.05
(0.30)
10-PIN PLASTIC TSON (UNIT:mm)
(0.30)
UPG2027TQ
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
: 260°C or below
: 10 seconds or less
: 60 seconds or less
: 120±30 seconds
: 3 times
: 0.2%(Wt.) or below
IR260
VPS
Peak temperature (package surface temperature)
Time at temperature of 200°C or higher
Preheating time at 120 to 150°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
: 215°C or below
: 25 to 40 seconds
: 30 to 60 seconds
: 3 times
: 0.2%(Wt.) or below
VP215
Wave Soldering
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature)
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
: 260°C or below
: 10 seconds or less
: 120°C or below
: 1 time
: 0.2%(Wt.) or below
WS260
Partial Heating
Peak temperature (pin temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
: 350°C or below
: 3 seconds or less
: 0.2%(Wt.) or below
HS350
Caution
Do not use different soldering methods together (except for partial heating).
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably
be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify CEL for all damages resulting from such improper use or sale.
11/12/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.