NTE1192 Integrated Circuit VCO for Phase Lock Loop (PLL) Description: The NTE1192 is a Phase–Locked Loop Frequency Synthesizer packaged in a 9–lead SIP type package. Features: D Double Balanced Mixer D Emitter Follower Circuit D Differential Amplifier D Wide Operating Supply Voltage Range Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10V Pin6 Supply Voltage, V6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14V Pin1 Supply Voltage, V9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600mW Derated Above 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8mW/°C Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –30° to +75°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +150°C Electrical Characteristics: (TA = +25°C, VCC = 7V unless otherwise specified) Parameter Supply Current Pin6 Supply Current Pin9 Maximum Supply Current Symbol Test Conditions Min Typ Max Unit ICC 21.5 – 38.0 mA I6 3.0 – 5.5 mA I9(MAX) Pin7 GND 6 – 12 mA Output Power PO V9 = 12V 6 10 – mW Differential Amplifier Input Impedance Pin7 Parallel Input Resistance Rip7 f = 27MHz – 1.0 – kΩ – 6.5 – pF – 4.0 – kΩ – 4.0 – pF Pin7 Parallel Input Capacitance Cip7 Differential Amplifier Output Impedance Pin9 Parallel Output Resistance Rop9 Pin9 Parallel Output Capacitance Cop9 V9 = 12V, f = 27MHz Electrical Characteristics (Cont’d): (TA = +25°C, VCC = 7V unless otherwise specified) Parameter Symbol Doubly Balanced Mixer Input Impedance Pin4 Parallel Input Resistance Pin4 Parallel Input Capacitance Rip4 Test Conditions f = 10MHz Cip4 Doubly Balanced Mixer Output Impedance Pin6 Parallel Output Resistance Pin6 Parallel Output Capacitance Rop6 f = 27MHz Cop6 Min Typ – 1.5 – kΩ – 4.3 – pF – 3.5 – kΩ – 6.0 – pF Pin Connection Diagram (Front View) 9 Diff Amp Output 8 VCC 7 Diff Amp Input 6 Mixer Output 5 GND 4 Mixer Input 3 N.C. 2 Mixer Input 1 OSC .126 (3.2) .323 (8.2) Max .100 (2.54) .906 (23.0) Max 1 9 .020 (0.50) .800 (20.3) .099 (2.5) Min Max Unit