NTE190 Silicon NPN Transistor High Voltage Amplifier Description: The NTE190 is an NPN silicon transistor in a TO202N type case designed for horizontal drive applications, high voltage linear amplifiers, and high voltage transistor regulators. Features: D High Collector–Emitter Breakdown Voltage: V(BR)CEO = 180V (Min) @ IC = 1mA D Low Collector–Emitter Saturation Voltatge: VCE(sat) = 0.5V (Max) @ IC = 200mA D High Power Dissipation: PD = 10W @ TC = +25°C Absolute Maximum Ratings: Collector–Emitter Voltage, VCEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180V Collector–Base Voltage, VCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180V Emitter–Base Voltage, VEB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V Collector Current, IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1A Total Device Dissipation (TA = +25°C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1W Derate Above 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8mW/°C Total Device Dissipation (TC = +25°C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10W Derate Above 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80mW/°C Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +150°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +150°C Lead Temperature (During Soldering, 1/16” from case for 10sec), TL . . . . . . . . . . . . . . . . . . . +260°C Thermal Resistance, Junction–to–Ambient, RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125°C/W Thermal Resistance, Junction–to–Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.5°C/W Electrical Characteristics: (TC = +25°C unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit OFF Characteristics Collector–Emitter Breakdown Voltage V(BR)CEO IC = 1mA, IB = 0 180 – – V Collector–Base Breakdown Voltage V(BR)CBO IC = 100µA, IE = 0 180 – – V Emitter–Base Breakdown Voltage V(BR)EBO IE = 100µA, IC = 0 5 – – V – – 0.1 mA Collector Cutoff Current ICBO VCB = 150V, IE = 0 Electrical Characteristics (Cont’d): (TC = +25°C unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit ON Characteristics (Note 1) DC Current Gain hFE IC = 10mA, VCE = 10V 40 – – Base–Emitter ON Voltage VBE(on) IC = 200mA, VCE = 1V – – 1.0 V Collector–Emitter Saturation Voltage VCE(sat) IC = 200mA, IB = 20mA – – 0.5 V fT IC = 50mA, VCE = 20V, f = 20MHz 35 – – MHz Dynamic Characteristics Current Gain–Bandwidth Product Output Capacitance Cob VCB = 10V, IE = 0, f = 100kHz – – 12 pF Input Capacitance Cib VBE = 0.5V, IC = 0, f = 100kHz – – 110 pF Note 1. Pulse Test: Pulse Width ≤ 300µs. Duty Cycle ≤ 2%. .380 (9.65) Max .050 (1.27) .160 (4.06) .280 (7.25) Max .128 (3.28) Dia .100 (2.54) .218 (5.55) E B C .995 (25.3) .475 (12.0) Min .100 (2.54) .200 (5.08) Collector Connected to Tab