NTE3183 & NTE3184 Discrete Blue LED Indicators Description: The NTE3183 and NTE3184 are blue source color light emitting diodes made with GaN on SIC. It is recommended that a wrist strap or anit–electrostatic glove be used when handling these devices as static electricity and surge will damage these devices. All devices, equipment, and machinery must be electrically grounded. Features: D Low Power Consumption D Solid State Blue Light Source NTE3183 (Blue Diffused) NTE3184 (Clear Blue) D Suitable for use in Full Color LED Displays and Indicators in Diagnostic/Analytical Equipment Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Reverse Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V DC Forward Current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width), IF . . . . . . . . . . . . . . . . . . . . . . . 200mA Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105mW Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +85°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +85°C Lead Temperature (During Soldering, .157 (4mm) below package base, 5sec max), TL . . . +260°C Electro–Optical Characteristics: (TA = +25°C unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit Forward Voltage VF IF = 20mA – 4.5 5.5 V Reverse Current IR VR = 5V – 10 – µA Luminous Intensity NTE3183 IV IF = 20mA 12.5 – 40 mcd 20 – 90 mcd – 60 – deg. – 20 – deg. NTE3184 Viewing Angle NTE3183 NTE3184 2q1/2 Note 1 Note 1. Viewing Angle is the off–axis angle at which the luminous intensity is half the axial luminous intensity. Electro–Optical Characteristics (Cont’d): (TA = +25°C unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit λPEAK IF = 20mA – 430 – nm Spectral Line Half Width ∆λ IF = 20mA – 65 – nm Capacitance C VF = 0, f = 1MHz – 100 – pF Peak Emission Wave Length .126 (3.2) Dia .114 (2.9) Dia .040 (1.01) Cathode .181 (4.6) 1.063 (27.0) Min .060 (1.5) Typ .025 (0.63) Max Sq .100 (2.54)