NTE6094 Silicon Rectifier Schottky Barrier Description: The NTE6094 is a Schottky Barrier Rectifier in a DO5 type package designed for use as a rectifier in low–voltage, high–frequency inverters, freewheeling diodes, and polarity–protection diodes. Features: D Guaranteed Reverse Avalanche D Extremely Low vF D Low Stored Charge, majority Carrier Conduction D Guardring for Stress Protection D Low Power Loss/High Efficiency D +150°C Operating Junction Temperature Capability D High Surge Capacity Absolute Maximum Ratings: Peak Repetitive Reverse Voltage, VRRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45V Working Peak Reverse Voltage, VRWM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45V DC Blocking Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45V Peak Repetitive Forward Current, IFRM (VR = 45V, TC = +90°C, Square Wave, 20kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120A Non–Repetitive Peak Surge Current, IFSM (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60Hz) . . . . . . . . . . 800A Peak Repetitive Reverse Surge Current (Note 1, 2.0µs, 1.0kHz), IRRM . . . . . . . . . . . . . . . . . . . . . 2A Voltage Rate of Change (VR = 45V), dv/dt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700V/µs Operating Junction Temperature Range (Reverse Voltage Applied), TJ . . . . . . . . . . –65° to +150°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +165°C Maximum Thermal Resistance, Junction–to–Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0°C/W Note 1. Pulse Test: Pulse Width = 300µs, Duty Cycle = 2%. Electrical Characteristics: (TC = +25°C unless otherwise specified) Parameter Symbol Maximum Instantaneous Forward Voltage vF Maximum Instantaneous Reverse Current iR Test Conditions Min Typ Max Unit iF = 60A, Note 1 – – 0.70 V iF = 60A, TC = +125°C, Note 1 – – 0.60 V iF = 120A, TC = +125°C, Note 1 – – 0.84 V VR = 45V, TC = +25°C, Note 1 – – 50 mA VR = 45V, TC = +125°C, Note 1 – – 200 mA DC Reverse Current IR VR = 45V, TC = +115°C – – 250 mA Maximum Capacitance Ct VR = 5V, 100kHz ≤ f ≤ 1MHz – – 4000 pF Note 1. Pulse Test: Pulse Width = 300µs, Duty Cycle = 2%. .687 (17.4) Max .667 (16.9) Dia Max .375 (9.55) Max 1.288 (32.71) Max .140 (3.65) Dia Max .450 (11.4) Max .200 (5.08) Max .453 (11.5) Max 1/4–28 UNF–2A