NTE NTE909D

NTE909 & NTE909D
Integrated Circuits
Operational Amplifier
Description:
These devices are monolithic operational amplifiers intended for general–purpose applications. Operation is completely specified over the range of voltages commonly used for these devices. The design, in addition to providing high gain, minimizes both offset voltages and bias currents. Further, the
class–B output stage gives a large output capability with minimum power drain.
External components are used to frequency compensate the amplifier. Although the unity–gain compensation network specified will make the amplifiers unconditionally stable in all feedback configurations, compensation can be tailored to optimize high–frequency performance for any gain setting.
The fact that the amplifiers are built on a single silicon chip provides low offset and temperature drift
at minimum cost. It also ensures negligble drift due to temperature gradients in the vicinity of the amplifier.
Absolute Maximum Ratings:
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18V
Power Dissipation (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250mW
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10V
Output Short–Circuit Duration (TA = +25°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 seconds
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to +70°C
Lead Temperature (Soldering, 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300°C
Note 1 For operating at elevated temperatures, the device must be derated based on a 100°C maximum junction temperature and a thermal resistance 150°C/W junction to ambient or 45°C/W,
junction to case for the metal can package.
Electrical Characteristics: (0°C ≤ TA = ≤ +70°C, ±9V ≤ VS ≤ ±15V, C1 = 5000pF, R1 = 1.5k,
C2 = 200pF and R2 = 51Ω unless otherwise specified)
Parameter
Test Conditions
Min
Typ
Max
Unit
Input Offset Voltage
TA = +25°C, RS ≤ 10kΩ
–
2.0
7.5
mV
Input Bias Current
TA = +25°C
–
300
1500
nA
TA = TMIN
–
0.36
2.0
µA
TA = +25°C
–
100
500
nA
TA = TMIN
–
75
400
nA
TA = TMAX
–
125
750
nA
Input Offset Current
Electrical Characteristics (Cont’d): (0°C ≤ TA = ≤ +70°C, ±9V ≤ VS ≤ ±15V, C1 = 5000pF,
R1 = 1.5k, C2 = 200pF and R2 = 51Ω unless otherwise
specified)
Parameter
Test Conditions
Min
Typ
Max
Unit
TA = +25°C
50
250
–
kΩ
TA = TMIN
50
250
–
kΩ
Output Resistance
TA = +25°C
–
150
–
Ω
Supply Current
TA = +25°C, VS = ±15V
–
2.6
6.6
mA
Transient Response Risetime
VIN = 20mV, CL ≤ 100pF, TA = +25°C
–
0.3
1.0
µs
–
10
30
%
Input Resistance
Transient Response Overshoot
Slew Rate
TA = +25°C
–
0.25
–
V/µs
Average Temperature Coefficient
of Input Offset Voltage
RS = 50Ω, TA = +25°C to TMAX
–
6.0
–
µV/°C
RS = 50Ω, TA = +25°C to TMIN
–
12
–
µV/°C
Large Signal Voltage
VS = ±15V, RL ≥ 2kΩ, VOUT = ±10V
15
45
–
V/mV
Output Voltage Swing
VS = ±15V, RL = 10kΩ
±12
±14
–
V
VS = ±15V, RL = 2kΩ
±10
±13
–
V
Input Voltage Range
VS = ±15V
±8
±10
–
V
Common Mode Rejection Ratio
RS ≥ 10kΩ
65
90
–
dB
Supply Voltage Rejection Ratio
RS ≥ 10kΩ
–
25
200
µV/V
Pin Connection Diagram
NTE909
(Top View)
NTE909D
Output Freq Comp
Output
V (+)
5
4
6
7
V (–)
3
Non–Invert Input
N.C. 1
N.C. 2
Input Freq Comp A 3
Invert Input 4
Non–Invert Input 5
Input Freq Comp B
2
8
Invert Input
1
Input Freq Comp A
14 N.C.
13 N.C.
12 Input Freq Comp B
11 V (+)
10 Output
V (–) 6
9 Output Freq Comp
N.C. 7
8 N.C.
.370 (9.39) Dia Max
.335 (8.52) Dia Max
.177 (4.5)
Max
.492
(12.5)
Min
.018 (0.45) Dia Typ
3
2
4
1
5
8
45°
7
.200 (5.06)
Dia
6
.032 (0.82)
14
8
1
7
.785 (19.95)
Max
.300
(7.62)
.200 (5.08)
Max
.100 (2.45)
.600 (15.24)
.099 (2.5) Min