NTE NTE987SM

NTE987/NTE987SM
Integrated Circuit
Quad, Low Power OP Amp
Description:
The NTE987 and NTE987SM are low cost quad operational amplifiers with true differential inputs.
These have several distinct advantages over standard operational amplifier types in single supply applications. The quad amplifier can operate at supply voltages as low as 3V or as high as 32V with
quiescent currents about one fifth of those associated with the NTE941 (on a per amplifier basis).
The common mode input range includes the negative supply, thereby eliminating the necessity for
external biasing components in many applications. The output voltage range also includes the negative power supply voltage.
Features:
D Available in 14–Lead DIP (NTE987) and Surface Mount, SOIC–14 (NTE987SM)
D Short Circuit Protected Outputs
D True Differential Input Stage
D Single Supply Operation: 3V to 32V
D Four Amplifiers per Package
D Internally Compensated
D Common Mode Range Extends to Negative Supply
D Industry Standard Pin–Outs
Absolute Maximum Ratings: (TA = +25°C unles otherwise specified)
Power Supply Voltages
Single Supply, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32V
Split Supplies, VCC VEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±16V
Input Differential Voltage Range (Split Power Supplies), VIDR . . . . . . . . . . . . . . . . . . . . . . . . . . . ±32V
Input Common Mode Voltage range, VICR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 to 32V
Input Forward Current (VI < 0.3V, Note 1), IIF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
Output Short Circuit Duration, tS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous
Operating Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Operating Ambient Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to +70°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +125°C
Note 1. This input current will only exist when the voltage is negative at any of the input leads. Normal
output states will reestablish when the input voltage returns to a voltage greater than –0.3V.
Electrical Characteristics: (VCC = 5V, VEE = GND, TA = +25°C unles otherwise specified)
Parameter
Input Offset Voltage
Average Temperature Coefficient
of Input Offset Voltage
Input Offset Current
Average Temperature Coefficient
of Input Offset Current
Input Bias Current
Symbol
VIO
Test Conditions
Min
Typ
Max
Unit
–
2
7
V
–
–
9
V
–
7
–
µV/°C
–
5
50
nA
TA = 0 to +70°C
–
–
150
nA
TA = 0 to +70°C
–
10
–
pA/°C
–
–90
–250
nA
TA = 0 to +70°C
–
–
–500
nA
VCC = 30V
0
–
28.3
V
0
–
28.0
V
–
–
VCC
V
25
100
–
V/mV
15
–
–
V/mV
1kHz ≤ f ≤ 20kHz, Input Referenced
–
–120
–
dB
RS ≤ 10kΩ
65
70
–
dB
65
100
–
dB
0
–
3.3
V
RL = 2kΩ
26
–
–
V
RL = 10kΩ
27
28
–
V
VCC = 5V, RL = 10kΩ, TA = 0 to +70°C
–
5
20
mV
VID = 1V, VCC = 15V
20
40
–
mA
10
20
–
mA
10
20
–
mA
5
8
–
mA
VID = –1V, VO = 200mV
12
50
–
µA
–
40
60
mA
VCC = 30V
–
–
3.0
mA
VCC = 5V
–
–
1.2
mA
VCC = 5V to 30V,
VICR = 0 to VCC–1.7V,
VO = 1.4V, RS = 0Ω
∆VIO/∆T TA = 0 to +70°C
IIO
∆IIO/∆T
IIB
Input Common–Mode Voltage
Range
VICR
Differential Input Voltage Range
VIDR
Large Signal Open–Loop
Voltage Gain
AVOL
TA = 0 to +70°C
Channel Separation
Common–Mode Rejection Ratio
CMRR
Power Supply Rejection Ratio
PSRR
RL = 2kΩ, VCC = 15V,
For Large VO Swing
Output Voltage Range
VOR
RL = 2kΩ
Output Voltage – High Limit
VOH
VCC = 30V,
TA = 0 to +70°C
°
Output Voltage – Low Limit
Output Source Current
TA = 0 to +70°C
VOL
ISource
TA = 0 to +70°C
TA = 0 to +70°C
Output Sink Current
ISink
VID = –1V, VCC = 15V
TA = 0 to +70°C
Output Short Circuit to GND
Ios
Note 3
Power Supply Current
ICC
VO = 0, RL = ∞,
TA = 0 to +70°C
°
Note 2. The input common–mode voltage or either input signal voltage should not be allowed to go
negative by more than 0.3V. The upper end of the common–mode voltage range is
VCC–1.7V, but either or both inputs can go to +32V without damage.
Note 3. Short circuits from the output to VCC can cause excessive heating and eventual destruction.
Destructive dissipation can result from simultaneous shorts on all amplifiers.
Pin Connection Diagram
Output 1 1
14 Output 4
13 Invert Input 4
12 Non–Invert Input 4
Invert Input 1 2
Non–Invert Input 1 3
V (+) 4
11 GND
10 Non–Invert Input 3
Non–Invert Input 2 5
Invert Input 2 6
9 Invert Input 3
Output 2 7
8 Output 3
NTE987
14
8
1
7
.785 (19.95)
Max
.300
(7.62)
.200 (5.08)
Max
.100 (2.45)
.099 (2.5) Min
.600 (15.24)
NTE987SM
.340 (8.64)
14
8
1
7
.050 (1.27)
.236
(5.99)
.154
(3.91)
016
(.406)
.198 (5.03)
061
(1.53)
.006 (.152)
NOTE: Pin1 on Beveled Edge