DATA SHEET O K I L A S E R P R O D U C T S OD9601N (1.25 Gbps) OD9602N (622 Mbps) OD9604N (2.488 Gbps) + 3.3-V Photo Diode Preamp Modules February 2000 ■ ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– CONTENTS OD9601N, OD9602N, and OD9604 Photo Diode Preamp Module Family ..................... 1 OD9601N ...................................................................................................................................... 3 OD9602N ...................................................................................................................................... 7 OD9604N .................................................................................................................................... 11 Oki Semiconductor OD9601N, OD9602N, and OD9604 Photo Diode Preamp Module Family InGaAs Technology (+ 3.3 V) INTRODUCTION Oki Semiconductor’s OD9601N, OD9602N, and OD9604N PD Preamp Module Family are surface-mount 1.3-µm, InGaAs PIN photo diodes combined with a transimpedance amplifier. The OD9601N operates at 1.25 Gbps in STM4/OC12/OC24 environments. The OD9602N operates at 622 Mbps in STM4/OC12 environments. The OD9604N operates at 2.488 Gbps in STM16/OC48 environments. The OD9601N, OD9602N, and OD9604N use a single + 3.3-V power supply, provide a differential output signal, and are available in an 8-pin Mini-Dil package. These photo diode preamp modules are coupled to a single-mode fiber with a pigtail. GENERAL FEATURES • Surface-mount Mini-Dil package • Low cost • Operating Performance: - OD9601N - OD9602N - OD9604N 1.25 Gbps operation 622 Mbps operation 2.488 Gbps operation • Peak-sensitivity wavelength: 1300 nm GENERAL APPLICATION • Optical transmission systems - OD9601N 1.25 Mbps, STM4/OC12/OC24 - OD9602N 622 Mbps, STM4/OC12 - OD9604N 2.488 Gbps, STM16/OC48 • Optical transmission modules (receiver section) • Optical receivers • Inter-office interconnection • Gigabit Ethernet (OD9601N / OD9604N) • Ethernet (OD9602N) Oki Semiconductor 1 ■ OD9601N, OD9602N, and OD9604 Photo Diode Preamp Module Family ■ –––––––––––––––––––––––––––––––– Notes 2 Oki Semiconductor OD9601N Photo Diode Preamp Module 1.25-Gbps InGaAs Technology (+ 3.3 V) INTRODUCTION Oki Semiconductor’s OD9601N PD Preamp Module is a surface-mount 1.3-µm, InGaAs PIN photo diode combined with a transimpedance amplifier. This OD9601N is designed to operate at 1.25 Gbps in STM4/OC12/OC24 environments. This photo diode uses a single + 3.3-V power supply and provides a differential output signal. It is available in an 8-pin Mini-Dil package and is coupled to a single-mode fiber with a pigtail. FEATURES • • • • Surface-mount Mini-Dil package Low cost 1.25 Gbps operation Peak-sensitivity wavelength: 1300 nm APPLICATION • • • • Optical transmission modules (receiver section) Optical receivers Inter-office interconnection Gigabit Ethernet Oki Semiconductor 3 ■ OD9601N Photo Diode Preamp Module ■ –––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted) Parameter Supply Voltage Symbol Ratings Units Vs 6 mW dBm Incident Optical Power PIOP -3 Operating Case Temperature Topr - 40 to + 85 °C Storage Temperature Tstg - 40 to + 85 °C Soldering Profile Tsol 230 (30) °C (sec) Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device. Optical and Electrical Characteristics (Ta=25°C, VCC=3.3 V, λ=1310 nm unless otherwise noted) Test Conditions Min. Typ. Max. Supply Voltage - +3.0 +3.3 +3.6 V Supply Current - - 26 50 mA -3 dBm Pin= -22 dBm, fr = 50 MHz - 44 - kHz 20% to 80% Pin= -3 dBm - - 300 ps BER < 10 -12 (See note 1) - -28 - dBm Parameter Low Frequency Cutoff Rise / Fall Time Sensitivity Differential Output Voltage Pin= -3 dBm 185 250 415 mV -3 dBm Pin= - 22 dBm, fr = 50 MHz 750 820 1100 MHz Differential, measured with -22 dBm input signal 2.7 3.4 4.1 kV / W BW=1500 MHz, Pin=0 mW - 0.23 - µW Optical Modulation Bandwidth Differential Responsivity Input Noise Equivalent Optical Power Notes: Data rate: 1.25 Gbps. Data sequence: PRBS 2 23 -1. Contact Oki Semiconductor sales office for reliability report. Connector and Fiber Specifications Connector Fiber 4 FC-PC, SC-PC, MUJ-PC etc 1.31-µm single-mode fiber Diameter: 0.9 mm Color: Dark blue Bending Radius: 20 mm (minimum) Heat resistant Length: Options (contact Oki Semiconductor) Oki Semiconductor Units ––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ■ OD9601N Photo Diode Preamp Module ■ PACKAGE DIMENSIONS (Units: mm) 2.5 2.5 11.2 5 8 5.6 (TOP VIEW) 1.0 1.8 7.62 R1 1 4 2.54 x 3 1.75 0.46 0.17 3 max 0.25 Pin Configuration Pin No. Description Pin No. Description 01 VCC 05 Output (+) 02 GND 06 NC 03 GND 07 NC 04 Output (-) 08 GND Oki Semiconductor 5 ■ OD9601N Photo Diode Preamp Module ■ –––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Notes: 6 Oki Semiconductor OD9602N Photo Diode Preamp Module 622 Mbps InGaAs Technology (+ 3.3 V) introduction Oki Semiconductor’s OD9602N PD Preamp Module is a surface-mount 1.3-µm, InGaAs PIN photo diode combined with a transimpedance amplifier. This OD9602N is designed to operate at 622 Mbps in STM4/OC12 environments. This photo diode uses a single + 3.3-V power supply and provides a differential output signal. It is available in an 8-pin Mini-Dil package and is coupled to a single-mode fiber with a pigtail. FEATURES • • • • Surface-mount Mini-Dil package Low cost 622 Mbps operation Peak-sensitivity wavelength: 1300 nm APPLICATION • • • • Optical transmission modules (receiver section) Optical receivers Inter-office interconnect Ethernet Oki Semiconductor 7 ■ OD9602N Photo Diode Preamp Module ■ –––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ELECTICAL CHARACTERISTICS Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted) Parameter Supply Voltage Symbol Ratings Units Vs 5.5 V Incident Optical Power PIOP 4 dBm Operating Case Temperature Topr - 40 to + 85 °C Storage Temperature Tstg - 40 to + 85 °C Soldering Profile Tsol 230 (30) °C (sec) Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device Optical and Electrical Characteristics (Ta=25°C, VCC=3.3 V, λ=1310 nm unless otherwise noted) Test Conditions Min. Typ. Max. Supply Voltage - +3.0 +3.3 +3.6 V Supply Current - 12 25 35 mA Low Frequency Cutoff -3 dBm Pin= -23 dBm, fr = 50 MHz - - 150 kHz Sensitivity BER < 10 -10 (See note 1) - -33.2 - dBm Pin= -3 dBm - - 950 mV -3 dBm Pin= - 22 dBm, fr = 50 MHz 450 590 - MHz Differential, measured with -22 dBm input signal 3.7 - 6.8 kV / W Parameter Differential Output Voltage Optical Modulation Bandwidth Differential Responsivity Notes: Data rate: 1.25 Gbps. Data sequence: PRBS 2 23 -1. Contact Oki Semiconductor sales office for reliability report. Connector and Fiber Specifications Connector Fiber 8 FC-PC, SC-PC, MUJ-PC etc 1.31-µm single-mode fiber Diameter: 0.9 mm Color: Dark blue Bending Radius: 20 mm (minimum) Heat resistant Length: Options (contact Oki Semiconductor) Oki Semiconductor Units ––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ■ OD9602N Photo Diode Preamp Module ■ PACKAGE DIMENSIONS (Units: mm) 2.5 2.5 11.2 5 8 5.6 (TOP VIEW) 1.0 1.8 7.62 R1 1 4 2.54 x 3 1.75 0.46 0.17 3 max 0.25 Pin Configuration Pin No. Description Pin No. Description 01 VCC 05 Output (+) 02 GND 06 NC 03 GND 07 GND 04 Output (-) 08 GND Oki Semiconductor 9 ■ OD9602N Photo Diode Preamp Module ■ –––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Notes: 10 Oki Semiconductor OD9604N Photo Diode Preamp Module 2.488 Gbps InGaAs Technology (+ 3.3 V) INTRODUCTION Oki Semiconductor’s OD9604N PD Preamp Module is a surface-mount 1.3-µm, InGaAs PIN photo diode combined with a transimpedance amplifier. This OD9604N is designed to operate at 2.488 Gbps in STM16/OC48 environments. This photo diode uses a single + 3.3-V power supply and provides a differential output signal. It is available in an 8-pin Mini-Dil package and is coupled to a single-mode fiber with a pigtail. FEATURES • • • • Surface mount Mini-Dil package Low cost 2.488 Gbps operation Peak-sensitivity wavelength: 1300 nm APPLICATION • • • • High-speed optical transmission modules (receiver section) High-speed optical receivers Inter-office interconnect Gigabit Ethernet Oki Semiconductor 11 ■ OD9604N Photo Diode Preamp Module ■ –––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ELECTICAL CHARACTERISTICS Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted) Parameter Supply Voltage Symbol Ratings Units Vs 6 V mW Optical Input Power PIOP 4 Operating Case Temperature (Ta) Topr - 40 to + 85 °C Storage Temperature Tstg - 40 to + 85 °C Soldering Profile Tsol 260 (10) °C (sec) Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device. Optical and Electrical Characteristics (Ta=25°C, VCC=3.3 V, λ=1310 nm unless otherwise noted) Parameter Test Conditions Min. Typ. Max. Units - +3.0 +3.3 +3.6 V Supply Voltage Supply Current - - 26 50 mA f3 dB 1400 - - MHz Differential, measured with -17 dBm input signal 1230 - 1860 V/W - -16 - - dBm Optical Modulation Bandwidth Responsivity Input Current before Clipping Differential Output Voltage Sensitivity - 185 250 415 mVp-p BER < 10 -10 (See note) - -23.0 - dBm AC Input -2 - - dBm f3 dB - 44 - kHz Optical Overload Low Frequency Cutoff Notes: Data rate: 1.25 Gbps. Data sequence: PRBS 2 23 -1. Contact Oki Semiconductor sales office for reliability report. Connector and Fiber Specifications Connector Fiber 12 FC-PC, SC-PC, MUJ-PC etc 1.31-µm single-mode fiber Diameter: 0.9 mm Color: Dark blue Bending Radius: 20 mm (minimum) Heat resistant Length: Options (contact Oki Semiconductor) Oki Semiconductor ––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ■ OD9604N Photo Diode Preamp Module ■ PACKAGE DIMENSIONS (Units: mm) 2.5 2.5 11.2 5 8 5.6 (TOP VIEW) 1.0 1.8 7.62 R1 1 4 2.54 x 3 1.75 0.46 0.17 3 max 0.25 Pin Configuration Pin Mo. Description Pin No. Description 01 VCC 05 Output (-) 02 GND 06 NC 03 GND 07 GND 04 Output (+) 08 GND Oki Semiconductor 13 ■ OD9604N Photo Diode Preamp Module ■ –––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Notes: 14 Oki Semiconductor The information contained herein can change without notice owing to product and/or technical improvements. Please make sure before using the product that the information you are referring to is up-to-date. The outline of action and examples of application circuits described herein have been chosen as an explanation of the standard action and performance of the product. When you actually plan to use the product, please ensure that the outside conditions are reflected in the actual circuit and assembly designs. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters outside the specified maximum ratings or operation outside the specified operating range. Neither indemnity against nor license of a third party's industrial and intellectual property right,etc.is granted by us in connection with the use of product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party's right which may result from the use thereof. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges, including but not limited to operating voltage, power dissipation, and operating temperature. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g.,office automation, communication equipment, measurement equipment, consumer electronics, etc.).These products are not authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property or death or injury to humans. Such applications include, but are not limited to: traffic control, automotive, safety, aerospace, nuclear power control, and medical, including life support and maintenance. Certain parts in this document may need governmental approval before they can be exported to certain countries. The purchaser assumes the responsibility of determining the legality of export of these parts and will take appropriate and necessary steps, at their own expense, for export to another country. Copyright 2000 Oki Semiconductor Oki Semiconductor reserves the right to make changes in specifications at anytime and without notice. This information furnished by Oki Semiconductor in this publication is believed to be accurate and reliable. However, no responsibility is assumed by Oki Semiconductor for its use; nor for any infringements of patents or other rights of third parties resulting from its use. No license is granted under any patents or patent rights of Oki. Oki Semiconductor Oki REGIONAL SALES OFFICES Northwest Area Southwest Area 785 N. Mary Avenue Sunnyvale, CA 94086 Tel: 408/720-8940 Fax: 408/720-8965 2302 Martin Street Suite 250 Irvine, CA 92715 Tel: 949/752-1843 Fax: 949/752-2423 North Central Area 300 Park Blvd. Suite 365 Itasca, IL 60143 Tel: 630/250-1313 Fax: 630/250-1414 Southeast Area 1590 Adamson Parkway Suite 220 Morrow, GA 30260 Tel: 770/960-9660 Fax: 770/960-9682 Northeast Area 138 River Road Shattuck Office Center Andover, MA 01810 Tel: 978/688-8687 Fax: 978/688-8896 Oki Web Site: http://www.okisemi.com For Oki Literature: Call toll free 1-800-OKI-6388 (6 a.m. to 5 p.m. Pacific Time) Oki Stock No: 320191-001 Corporate Headquarters 785 N. Mary Avenue Sunnyvale, CA 94086-2909 Tel: 408/720-1900 Fax: 408/720-1918