E2V0014-37-X1 ¡ electronic components OL3200N-5 LASER DIODES OL3200N-5 1.3 mm High-Power Laser-Diode DIP Module GENERAL DESCRIPTION The OL3200N-5 is a 1.3 mm, high-power laser diode DIP module with a single-mode fiber pigtail. The high-performance OKI laser diode achieved a single-mode fiber output of over 5 mW. This module is an optimal light source for long-haul fiber transmission systems and optical measuring instruments. FEATURES • • • • High output power: Pf=5 mW Single-mode fiber Hermetically-sealed,14-pin Dual-In-line Package (DIP) Includes thermoelectric cooler and monitor photodiode for temperature and power control APPLICATIONS • Line transmission systems • Subscriber loops • Optical measuring instruments PACKAGE DIMENSIONS (Unit: mm) • OL3200N-5 1.0 1 7.62 19 f0.9 12.7 25.4 5 7.1 20.8 9 6.35 5.9 24 3.8 2.54 f0.45 TERMINAL CONNECTION (BOTTOM VIEW) #14 (–) PD LD THERMISTOR CASE COOLER #8 FIBER (+) #7 PIN No. 1 2 3 4 5 6 7 FUNCTION COOLER ANODE NC NC NC LD ANODE, CASE GROUND and THERMISTOR NC PD CATHODE #1 PIN No. FUNCTION PD ANODE 8 LD CATHODE 9 LD ANODE, 10 CASE GROUND and THERMISTOR THERMISTOR 11 NC 12 NC 13 COOLER CATHODE 14 1/3 LASER DIODES OL3200N-5 ABSOLUTE MAXIMUM RATINGS Parameter Symbol Test Conditions Pf Fiber Output LD Reverse Voltage VR (LD) PD Reverse Voltage VR (PD) PD Forward Current IF (PD) Ta=25°C Ic Ratings Unit 7 mW 2 V 20 V 10 mA 1.2 A Operating Temperature Topr — –20 to +65 °C Storage Temperature Tstg — –20 to +70 °C Cooler Current OPTICAL AND ELECTRICAL CHARACTERISTICS Parameter Symbol Test Conditions ( TLD=25°C) Min. Typ. Max. Unit Threshold Current Ith — — 20 35 mA Operating Current Iop Pf=5 mW — 100 140 mA Center Wavelength lc Pf=5 mW 1280 1310 1330 nm Spectral Half Width Forward Voltage Dl Pf=5 mW — 3 7 nm VF Pf=5 mW — — 2 V PD Dark Current IDARK VR (PD)= 5 V — — 1 mA Monitor Current Im Pf=5 mW 0.2 1.0 — mA PD Capacitance Ct VR (PD)=5 V, f=1 MHz — 15 — pF Cooler Capacity DT Pf=5 mW 40 — — °C Cooler Current Ic DT=40°C — — 1.2 A Cooler Voltage Vc DT=40°C — — 3 V Thermistor Resistance Rth — — 10 — kW FIBER PIGTAIL SPECIFICATIONS Parameter Specifications Unit Single-mode — Mode Field Diameter 10±1 mm Cladding Diameter 125±2 mm Fiber Type Jacket Diameter Length Connector 900 mm 1 (Min.) m FC — 2/3 LASER DIODES OL3200N-5 TYPICAL CHARACTERISTICS Fiber Output Power vs. Forward Current 6 4.0 1.0 0.6 3 0.4 2 VF Monitor Current Im (mA) 0.8 Im 4 3.0 2.5 2.0 1.5 1.0 0.2 1 0.5 0 0 0.0 150 50 100 Forward Current IF (mA) 0.0 Oscillation Spectrum (Ta=25°C) 1 0.8 Relative Intensity Fiber Output Power Pf (mW) Pf Forward Voltage VF (V) 3.5 5 0.6 0.4 0.2 0 1275 1300 Wavelength (nm) 1325 3/3