Imaging Telecom D A T A S H E E T Lighting Sensors Channel Photomultipliers and Modules CHV 30N CPM High Voltage Power Supply Description The CHV 30N is a self contained high voltage supply, specially designed for the Channel Photomultiplier CPM C900, C1300 and C1900. It provides the matching voltages for the cathode, the channel entrance and channel end. Beside, the module is prepared to switch the potential between the two high voltages via an external TTL-pulse, in order to protect the CPM from over exposure or to apply a gating function. . w w w. p e r k i n e l m e r. c o m / o p t o CVN 30 Power Supply Technical Specifications Dimensions (mm) *) Not valid for VGate CAUTION: HIGH VOLTAGE WARNING This product operates at high voltage. Extreme care must be taken to ensure operator safety and to avoid damage to other instruments. Avoid direct contact with the entrance window of the built in CPM when high voltage is applied. Avoid placing conductive material close to the cathode. Ensure that no light levels are applied, generating higher anode currents than specified. All given values are nominal/typical @ 20 °C ambient temperature; specification subject to change without notice USA: PerkinElmer Optoelectronics 2175 Mission College Blvd. Santa Clara, CA 95054 Phone: (408) 565-0850 Fax: (408) 565-0793 EUROPE: PerkinElmer Optoelectronics GmbH Wenzel-Jaksch-Str. 31 65199 Wiesbaden Germany Phone: +49 611 492 534 Fax: +49 611 492 578 ASIA: PerkinElmer Optoelectronics 47 Ayer Rajah Crescent #06-12 Singapore 139947 Phone: +65 775 2022 Fax: +65 775 1008 . DS-290 Rev A 1101 © 2001 PerkinElmer, Inc. All rights reserved. w w w. p e r k i n e l m e r. c o m / o p t o