POINN TISP3240F3

TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
Copyright © 1997, Power Innovations Limited, UK
MARCH 1994 - REVISED SEPTEMBER 1997
TELECOMMUNICATION SYSTEM SECONDARY PROTECTION
●
Ion-Implanted Breakdown Region
Precise and Stable Voltage
Low Voltage Overshoot under Surge
DEVICE
VDRM
T
1
8
G
V(BO)
NC
2
7
G
NC
3
6
G
R
4
5
G
V
V
‘3240F3
180
240
‘3260F3
200
260
‘3290F3
220
290
‘3320F3
240
320
‘3380F3
270
380
P PACKAGE
(TOP VIEW)
Planar Passivated Junctions
Low Off-State Current < 10 µA
●
Rated for International Surge Wave Shapes
STANDARD
FCC Part 68
175
ANSI C62.41
120
10/160 µs
FCC Part 68
60
10/560 µs
FCC Part 68
45
1
8
T
G
2
7
G
G
3
6
G
R
4
5
R
SL PACKAGE
(TOP VIEW)
RLM 88
38
50
VDE 0433
50
T
1
CCITT IX K17/K20
50
G
2
REA PE-60
35
R
3
MDXXAG
Surface Mount and Through-Hole Options
PACKAGE
PART # SUFFIX
Small-outline
D
Small-outline taped
and reeled
Plastic DIP
P
SL
MD23AA
device symbol
R
T
DR
Single-in-line
MDXXAF
Specified T terminal ratings require connection of pins 1 and 8.
Specified R terminal ratings require connection of pins 4 and 5.
FTZ R12
10/1000 µs
●
T
A
8/20 µs
10/700 µs
●
ITSP
2/10 µs
0.5/700 µs
MDXXAE
NC - No internal connection
●
WAVE SHAPE
D PACKAGE
(TOP VIEW)
UL Recognized, E132482
description
SD3XAA
These high voltage dual symmetrical transient
voltage suppressor devices are designed to
protect telecommunication applications with
ground backed ringing against transients caused
by lightning strikes and a.c. power lines. Offered
in five voltage variants to meet battery and
protection requirements they are guaranteed to
suppress and withstand the listed international
lightning surges in both polarities. Transients are
initially clipped by breakdown clamping until the
voltage rises to the breakover level, which
PRODUCT
G
Terminals T, R and G correspond to the
alternative line designators of A, B and C
causes the device to crowbar. The high crowbar
holding current prevents d.c. latchup as the
current subsides.
These monolithic protection devices are
fabricated in ion-implanted planar structures to
INFORMATION
Information is current as of publication date. Products conform to specifications in accordance
with the terms of Power Innovations standard warranty. Production processing does not
necessarily include testing of all parameters.
1
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
description (Continued)
ensure precise and matched breakover control and are virtually transparent to the system in normal operation
The small-outline 8 pin assignment has been carefully chosen for the TISP series to maximise the inter-pin
clearance and creepage distances which are used by standards (e.g. IEC950) to establish voltage withstand
ratings.
absolute maximum ratings
RATING
SYMBOL
‘3240F3
‘3290F3
UNIT
± 180
‘3260F3
Repetitive peak off-state voltage (0°C < TJ < 70°C)
VALUE
± 200
VDRM
± 220
‘3320F3
± 240
‘3380F3
± 270
V
Non-repetitive peak on-state pulse current (see Notes 1, 2 and 3)
1/2 µs (Gas tube differential transient, open-circuit voltage wave shape 1/2 µs)
350
2/10 µs (FCC Part 68, open-circuit voltage wave shape 2/10 µs)
175
8/20 µs (ANSI C62.41, open-circuit voltage wave shape 1.2/50 µs)
120
10/160 µs (FCC Part 68, open-circuit voltage wave shape 10/160 µs)
60
5/200 µs (VDE 0433, open-circuit voltage wave shape 2 kV, 10/700 µs)
0.5/310 µs (RLM 88, open-circuit voltage wave shape 1.5 kV, 0.5/700 µs)
38
5/310 µs (CCITT IX K17/K20, open-circuit voltage wave shape 2 kV, 10/700 µs)
50
5/310 µs (FTZ R12, open-circuit voltage wave shape 2 kV, 10/700 µs)
50
10/560 µs (FCC Part 68, open-circuit voltage wave shape 10/560 µs)
45
10/1000 µs (REA PE-60, open-circuit voltage wave shape 10/1000 µs)
Non-repetitive peak on-state current (see Notes 2 and 3)
50 Hz,
35
4
D Package
1s
P Package
6
ITSM
SL Package
Initial rate of rise of on-state current,
A
50
ITSP
Linear current ramp, Maximum ramp value < 38 A
A rms
6
diF/dt
250
A/µs
TJ
-40 to +150
°C
Tstg
-40 to +150
°C
Junction temperature
Storage temperature range
NOTES: 1. Further details on surge wave shapes are contained in the Applications Information section.
2. Initially the TISP must be in thermal equilibrium with 0°C < TJ <70°C. The surge may be repeated after the TISP returns to its initial
conditions.
3. Above 70°C, derate linearly to zero at 150°C lead temperature.
electrical characteristics for the T and R terminals, TJ = 25°C
PARAMETER
IDRM
ID
Coff
TEST CONDITIONS
Repetitive peak offstate current
Off-state current
TISP3240F3
TISP3260F3
TISP3290F3
MIN
MIN
MIN
VD = ±2VDRM, 0°C < TJ < 70°C
±10
VD = ±50 V
Off-state capacitance
MAX
MAX
±10
±10
±10
MAX
UNIT
±10
µA
±10
µA
f = 100 kHz, Vd = 100 mV
D Package
50†
150
50†
150
50†
150
VD = 0, (see Notes 4 and 5)
P Package
65†
200
65†
200
65†
200
Third terminal = -50 to +50 V
SL Package
30†
100
30†
100
30†
100
fF
NOTES: 4. These capacitance measurements employ a three terminal capacitance bridge incorporating a guard circuit. The third terminal is
connected to the guard terminal of the bridge.
5. Further details on capacitance are given in the Applications Information section.
† Typical value of the parameter, not a limit value.
PRODUCT
2
INFORMATION
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
electrical characteristics for the T and G or the R and G terminals, TJ = 25°C
PARAMETER
IDRM
TEST CONDITIONS
Repetitive peak offstate current
TISP3240F3
TISP3260F3
TISP3290F3
MIN
MIN
MIN
VD = ±VDRM , 0°C < TJ < 70°C
MAX
MAX
MAX
UNIT
±10
±10
±10
µA
±240
±260
±290
V
±267†
±287†
±317†
V
±0.6
A
±3
V
dv/dt = ±250 V/ms,
V(BO)
V(BO)
Breakover voltage
Source Resistance = 300 Ω
Impulse breakover volt- dv/dt = ±1000 V/µs,
di/dt < 20 A/µs
Source Resistance = 50 Ω
age
dv/dt = ±250 V/ms,
I(BO)
Breakover current
VT
On-state voltage
IT = ±5 A, tW = 100 µs
IH
Holding current
di/dt = -/+30 mA/ms
Critical rate of rise of
Linear voltage ramp,
off-state voltage
Maximum ramp value < 0.85V(BR)MIN
dv/dt
ID
Off-state current
Off-state capacitance
±0.6
±0.15
±3
VD = 0,
Third terminal = -50 to +50 V VD = -5 V
VD = -50 V
(see Notes 6 and 7)
±0.15
±3
±0.15
±0.15
A
±5
±5
±5
kV/µs
±10
Vd = 100 mV
±0.6
±0.15
VD = ±50 V
f = 100 kHz,
Coff
±0.15
Source Resistance = 300 Ω
±10
µA
57†
95
57†
±10
95
57†
95
pF
26†
45
26†
45
26†
45
pF
11†
20
11†
20
11†
20
pF
NOTES: 6 These capacitance measurements employ a three terminal capacitance bridge incorporating a guard circuit. The third terminal is
connected to the guard terminal of the bridge.
7. Further details on capacitance are given in the Applications Information section
† Typical value of the parameter, not a limit value.
electrical characteristics for the T and R terminals, TJ = 25°C
PARAMETER
IDRM
ID
TEST CONDITIONS
Repetitive peak offstate current
Off-state current
TISP3380F3
MIN
MIN
VD = ±VDRM , 0°C < TJ < 70°C
Off-state capacitance
MAX
±10
VD = ±50 V
±10
MAX
UNIT
±10
µA
±10
µA
Vd = 100 mV
D Package
50†
150
50†
150
VD = 0, (see Notes 4 and 5)
P Package
65†
200
65†
200
Third terminal = -50 to +50 V
SL Package
30†
100
30†
100
f = 100 kHz,
Coff
TISP3320F3
fF
NOTES: 4. These capacitance measurements employ a three terminal capacitance bridge incorporating a guard circuit. The third terminal is
connected to the guard terminal of the bridge.
5. Further details on capacitance are given in the Applications Information section.
electrical characteristics for the T and G or the R and G terminals, TJ = 25°C
PARAMETER
IDRM
TEST CONDITIONS
Repetitive peak offstate current
VD = ±VDRM , 0°C < TJ < 70°C
TISP3320F3
TISP3380F3
MIN
MIN
MAX
MAX
UNIT
±10
±10
µA
±320
±380
V
±347†
±407†
V
dv/dt = ±250 V/ms,
V(BO)
V(BO)
Breakover voltage
Source Resistance = 300 Ω
Impulse breakover volt- dv/dt = ±1000 V/µs,
age
PRODUCT
di/dt < 20 A/µs
Source Resistance = 50 Ω
INFORMATION
3
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
electrical characteristics for the T and G or the R and G terminals, TJ = 25°C (Continued)
PARAMETER
TEST CONDITIONS
TISP3320F3
TISP3380F3
MIN
MAX
MIN
MAX
±0.15
±0.6
±0.15
±0.6
A
±3
V
UNIT
dv/dt = ±250 V/ms,
I(BO)
Breakover current
VT
On-state voltage
IT = ±5 A,
IH
Holding current
di/dt = -/+30 mA/ms
Critical rate of rise of
Linear voltage ramp,
off-state voltage
Maximum ramp value < 0.85V(BR)MIN
Off-state current
VD = ±50 V
dv/dt
ID
Coff
Source Resistance = 300 Ω
Off-state capacitance
tW = 100 µs
±3
±0.15
±0.15
A
±5
±5
kV/µs
±10
µA
f = 100 kHz, Vd = 100 mV
VD = 0,
57†
±10
95
57†
95
pF
Third voltage = -50 to +50 V
VD = -5 V
26†
45
26†
45
pF
(see Notes 6 and 7)
VD = -50 V
11†
20
11†
20
pF
NOTES: 6 These capacitance measurements employ a three terminal capacitance bridge incorporating a guard circuit. The third terminal is
connected to the guard terminal of the bridge.
7. Further details on capacitance are given in the Applications Information section.
† Typical value of the parameter, not a limit value.
PARAMETER MEASUREMENT INFORMATION
+i
Quadrant I
ITSP
Switching
Characteristic
ITSM
IT
V(BO)
VT
I(BO)
IH
V(BR)M
VDRM
-v
VD
ID
ID
I(BR)
V(BR)
I(BR)
IDRM
IDRM
VD
+v
VDRM
V(BR)M
V(BR)
IH
I(BO)
VT
V(BO)
IT
ITSM
Quadrant III
ITSP
Switching
Characteristic
-i
Figure 1. VOLTAGE-CURRENT CHARACTERISTIC FOR ANY PAIR OF TERMINALS
PRODUCT
4
INFORMATION
PMXXAA
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
thermal characteristics
MIN
PARAMETER
RθJA
Junction to free air thermal resistance
PRODUCT
TYP
MAX
D Package
160
P Package
100
SL Package
105
UNIT
°C/W
INFORMATION
5
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
A
TYPICAL CHARACTERISTICS
T and G, or R and G terminals
OFF-STATE CURRENT
vs
JUNCTION TEMPERATURE
100
NORMALISED BREAKDOWN VOLTAGES
vs
JUNCTION TEMPERATURE
TC3HAF
TC3HAI
Normalised Breakdown Voltages
1.2
ID - Off-State Current - µA
10
1
VD = 50 V
0·1
VD = -50 V
0·01
V(BO)
1.1
V(BR)M
1.0
V(BR)
Normalised to V(BR)
I(BR) = 100 µA and 25°C
Positive Polarity
0·001
0.9
-25
0
25
50
75
100
125
150
-25
TJ - Junction Temperature - °C
0
25
50
75
100
125
150
TJ - Junction Temperature - °C
Figure 2.
Figure 3.
NORMALISED BREAKDOWN VOLTAGES
vs
JUNCTION TEMPERATURE
ON-STATE CURRENT
vs
ON-STATE VOLTAGE
TC3HAJ
100
TC3HAL
V(BO)
1.1
IT - On-State Current - A
Normalised Breakdown Voltages
1.2
V(BR)M
1.0
V(BR)
10
150°C
Normalised to V(BR)
25°C
I(BR) = 100 µA and 25°C
-40°C
Negative Polarity
0.9
1
-25
0
25
50
75
100
125
150
TJ - Junction Temperature - °C
Figure 4.
PRODUCT
6
INFORMATION
1
2
3
4
5
VT - On-State Voltage - V
Figure 5.
6
7 8 9 10
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
TYPICAL CHARACTERISTICS
T and G, or R and G terminals
NORMALISED BREAKOVER VOLTAGE
vs
RATE OF RISE OF PRINCIPLE CURRENT
TC3HAH
1.0
0.9
0.8
0.7
0.6
0.5
I(BO)
0.4
0.3
IH
0.2
TC3HAB
1.3
Normalised Breakover Voltage
IH, I(BO) - Holding Current, Breakover Current - A
HOLDING CURRENT & BREAKOVER CURRENT
vs
JUNCTION TEMPERATURE
1.2
1.1
Positive
Negative
0.1
-25
0
25
50
75
100
125
1.0
0·001
150
TJ - Junction Temperature - °C
0·01
100
OFF-STATE CAPACITANCE
vs
JUNCTION TEMPERATURE
TC3HAE
Positive Bias
Negative Bias
TC3HAD
500
Off-State Capacitance - pF
100
Off-State Capacitance - pF
10
Figure 7.
OFF-STATE CAPACITANCE
vs
TERMINAL VOLTAGE
100
Terminal Bias = 0
Terminal Bias = 50 V
10
Terminal Bias = -50 V
1
1
10
50
Terminal Voltage - V
Figure 8.
PRODUCT
1
di/dt - Rate of Rise of Principle Current - A/µs
Figure 6.
10
0·1
0·1
-25
0
25
50
75
100
125
150
TJ - Junction Temperature - °C
Figure 9.
INFORMATION
7
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
TYPICAL CHARACTERISTICS
T and G, or R and G terminals
SURGE CURRENT
vs
DECAY TIME
TC3HAA
Maximum Surge Current - A
1000
100
10
2
10
100
1000
Decay Time - µs
Figure 10.
TYPICAL CHARACTERISTICS
T and R terminals
OFF-STATE CURRENT
vs
JUNCTION TEMPERATURE
100
NORMALISED BREAKDOWN VOLTAGES
vs
JUNCTION TEMPERATURE
TC3HAG
TC3HAK
Normalised Breakdown Voltages
VD = ±50 V
ID - Off-State Current - µA
10
1
0·1
0·01
1.2
V(BO)
1.1
V(BR)M
1.0
V(BR)
Normalised to V(BR)
I(BR) = 100 µA and 25°C
Both Polarities
0·001
0.9
-25
0
25
50
75
100
125
TJ - Junction Temperature - °C
Figure 11.
PRODUCT
8
INFORMATION
150
-25
0
25
50
75
100
TJ - Junction Temperature - °C
Figure 12.
125
150
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
TYPICAL CHARACTERISTICS
T and R terminals
NORMALISED BREAKOVER VOLTAGE
vs
RATE OF RISE OF PRINCIPLE CURRENT
TC3HAC
1.3
TC3XAA
100
90
80
70
P Package
60
Off-State Capacitance - fF
Normalised Breakover Voltage
OFF-STATE CAPACITANCE
vs
TERMINAL VOLTAGE
1.2
1.1
D Package
50
40
SL Package
30
20
Both Voltage Polarities
1.0
0·001
0·01
0·1
1
10
10
0·1
100
1
di/dt - Rate of Rise of Principle Current - A/µs
10
50
Terminal Voltage - V
Figure 13.
Figure 14.
THERMAL INFORMATION
MAXIMUM NON-RECURRING 50 Hz CURRENT
vs
CURRENT DURATION
THERMAL RESPONSE
TI3MAA
VGEN = 350 Vrms
ZθJΑΑ - Transient Thermal Impedance - °C/W
ITRMS - Maximum Non-Recurrent 50 Hz Current - A
TI3HAA
RGEN = 20 to 250 Ω
10
SL Package
P Package
D Package
1
0·1
1
10
100
1000
t - Current Duration - s
Figure 15.
PRODUCT
100
D Package
P Package
SL Package
10
1
0·0001 0·001
0·01
0·1
1
10
100
1000
t - Power Pulse Duration - s
Figure 16.
INFORMATION
9
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
APPLICATIONS INFORMATION
electrical characteristics
The electrical characteristics of a TISP are strongly dependent on junction temperature, TJ. Hence a
characteristic value will depend on the junction temperature at the instant of measurement. The values given
in this data sheet were measured on commercial testers, which generally minimise the temperature rise
caused by testing. Application values may be calculated from the parameters’ temperature curves, the power
dissipated and the thermal response curve (Zθ ).
lightning surge
wave shape notation
Most lightning tests, used for equipment verification, specify a unidirectional sawtooth waveform which has an
exponential rise and an exponential decay. Wave shapes are classified in terms of peak amplitude (voltage
or current), rise time and a decay time to 50% of the maximum amplitude. The notation used for the wave
shape is amplitude, rise time/decay time. A 50A, 5/310 µs wave shape would have a peak current value of
50 A, a rise time of 5 µs and a decay time of 310 µs. The TISP surge current graph comprehends the wave
shapes of commonly used surges.
generators
There are three categories of surge generator type, single wave shape, combination wave shape and circuit
defined. Single wave shape generators have essentially the same wave shape for the open circuit voltage
and short circuit current (e.g. 10/1000 µs open circuit voltage and short circuit current). Combination
generators have two wave shapes, one for the open circuit voltage and the other for the short circuit current
(e.g. 1.2/50 µs open circuit voltage and 8/20 µs short circuit current) Circuit specified generators usually
equate to a combination generator, although typically only the open circuit voltage waveshape is referenced
(e.g. a 10/700 µs open circuit voltage generator typically produces a 5/310 µs short circuit current). If the
combination or circuit defined generators operate into a finite resistance the wave shape produced is
intermediate between the open circuit and short circuit values.
current rating
When the TISP switches into the on-state it has a very low impedance. As a result, although the surge wave
shape may be defined in terms of open circuit voltage, it is the current wave shape that must be used to
assess the required TISP surge capability. As an example, the CCITT IX K17 1.5 kV, 10/700 µs surge is
changed to a 38 A, 5/310 µs waveshape when driving into a short circuit. Thus the TISP surge current
capability, when directly connected to the generator, will be found for the CCITT IX K17 waveform at 310 µs
on the surge graph and not 700 µs. Some common short circuit equivalents are tabulated below:
STANDARD
OPEN CIRCUIT
VOLTAGE
SHORT CIRCUIT
CURRENT
CCITT IX K17
CCITT IX K20
RLM88
VDE 0433
FTZ R12
1.5 kV, 10/700 µs
1 kV, 10/700 µs
1.5 kV, 0.5/700 µs
2.0 kV, 10/700 µs
2.0 kV, 10/700 µs
38 A, 5/310 µs
25 A, 5/310 µs
38 A, 0.2/310 µs
50 A, 5/200 µs
50 A, 5/310 µs
Any series resistance in the protected equipment will reduce the peak circuit current to less than the
generators’ short circuit value. A 2 kV open circuit voltage, 50 A short circuit current generator has an
effective output impedance of 40 Ω (2000/50). If the equipment has a series resistance of 25 Ω then the
surge current requirement of the TISP becomes 31 A (2000/65) and not 50 A.
PRODUCT
10
INFORMATION
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
APPLICATIONS INFORMATION
protection voltage
The protection voltage, (V(BO) ), increases under lightning surge conditions due to thyristor regeneration. This
increase is dependent on the rate of current rise, di/dt, when the TISP is clamping the voltage in its
breakdown region. The V(BO) value under surge conditions can be estimated by multiplying the 50 Hz rate
V(BO) (250 V/ms) value by the normalised increase at the surge’s di/dt (Figure 12.) . An estimate of the di/dt
can be made from the surge generator voltage rate of rise, dv/dt, and the circuit resistance.
As an example, the CCITT IX K17 1.5 kV, 10/700 µs surge has an average dv/dt of 150 V/µs, but, as the rise
is exponential, the initial dv/dt is higher, being in the region of 450 V/µs. The instantaneous generator output
resistance is 25 Ω. If the equipment has an additional series resistance of 20 Ω, the total series resistance
becomes 45 Ω. The maximum di/dt then can be estimated as 450/45 = 10 A/µs. In practice the
measured di/dt and protection voltage increase will be lower due to inductive effects and the finite slope
resistance of the TISP breakdown region.
capacitance
off-state capacitance
The off-state capacitance of a TISP is sensitive to junction temperature, TJ , and the bias voltage, comprising
of the dc voltage, VD , and the ac voltage, Vd . All the capacitance values in this data sheet are measured with
an ac voltage of 100 mV. The typical 25°C variation of capacitance value with ac bias is shown in Figure17.
When VD >> Vd the capacitance value is independent on the value of Vd . The capacitance is essentially
constant over the range of normal telecommunication frequencies.
NORMALISED CAPACITANCE
vs
RMS AC TEST VOLTAGE
1.05
AIXXAA
Normalised Capacitance
1.00
0.95
0.90
0.85
0.80
Normalised to Vd = 100 mV
0.75
DC Bias, VD = 0
0.70
1
10
100
1000
Vd - RMS AC Test Voltage - mV
Figure 17.
PRODUCT
INFORMATION
11
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
APPLICATIONS INFORMATION
longitudinal balance
Figure 18 shows a three terminal TISP with its equivalent "delta" capacitance Each capacitance, CTG , CRG
and CTR , is the true terminal pair capacitance measured with a three terminal or guarded capacitance
bridge. If wire R is biased at a larger potential than wire T then CTG > CRG . Capacitance CTG is equivalent to
a capacitance of CRG in parallel with the capacitive difference of (CTG - CRG ). The line capacitive unbalance
is due to (CTG - CRG ) and the capacitance shunting the line is CTR + CRG/2 .
Figure 18.
All capacitance measurements in this data sheet are three terminal guarded to allow the designer to
accurately assess capacitive unbalance effects. Simple two terminal capacitance meters (unguarded third
terminal) give false readings as the shunt capacitance via the third terminal is included.
PRODUCT
12
INFORMATION
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
MECHANICAL DATA
D008
plastic small-outline package
This small-outline package consists of a circuit mounted on a lead frame and encapsulated within a plastic
compound. The compound will withstand soldering temperature with no deformation, and circuit performance
characteristics will remain stable when operated in high humidity conditions. Leads require no additional
cleaning or processing when used in soldered assembly.
D008
Designation per JEDEC Std 30:
PDSO-G8
5,00 (0.197)
4,80 (0.189)
8
7
6
5
1
2
3
4
6,20 (0.244)
5,80 (0.228)
4,00 (0.157)
3,81 (0.150)
7° NOM
3 Places
1,75 (0.069)
1,35 (0.053)
0,50 (0.020)
x 45°NOM
0,25 (0.010)
0,203 (0.008)
0,102 (0.004)
0,79 (0.031)
0,28 (0.011)
7° NOM
4 Places
0,51 (0.020)
0,36 (0.014)
8 Places
Pin Spacing
1,27 (0.050)
(see Note A)
6 Places
5,21 (0.205)
4,60 (0.181)
0,229 (0.0090)
0,190 (0.0075)
4° ± 4°
1,12 (0.044)
0,51 (0.020)
ALL LINEAR DIMENSIONS ARE IN MILLIMETERS AND PARENTHETICALLY IN INCHES
NOTES: A.
B.
C.
D.
Leads are within 0,25 (0.010) radius of true position at maximum material condition.
Body dimensions do not include mold flash or protrusion.
Mold flash or protrusion shall not exceed 0,15 (0.006).
Lead tips to be planar within ±0,051 (0.002).
PRODUCT
MDXXAA
INFORMATION
13
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
MECHANICAL DATA
P008
plastic dual-in-line package
This dual-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic
compound. The compound will withstand soldering temperature with no deformation, and circuit performance
characteristics will remain stable when operated in high humidity conditions The package is intended for
insertion in mounting-hole rows on 7,62 (0.300) centers. Once the leads are compressed and inserted,
sufficient tension is provided to secure the package in the board during soldering. Leads require no
additional cleaning or processing when used in soldered assembly.
P008
Designation per JEDEC Std 30:
PDIP-T8
10,2 (0.400) MAX
8
7
6
5
Index
Dot
C
L
1
2
3
C
L
7,87 (0.310)
7,37 (0.290)
T.P.
4
6,60 (0.260)
6,10 (0.240)
1,78 (0.070) MAX
4 Places
5,08 (0.200)
MAX
Seating
Plane
0,51 (0.020)
MIN
3,17 (0.125)
MIN
2,54 (0.100) T.P.
6 Places
(see Note A)
0,533 (0.021)
0,381 (0.015)
8 Places
105°
90°
8 Places
0,36 (0.014)
0,20 (0.008)
8 Places
ALL LINEAR DIMENSIONS ARE IN MILLIMETERS AND PARENTHETICALLY IN INCHES
NOTE A: Each pin centerline is located within 0,25 (0.010) of its true longitudinal position
PRODUCT
14
INFORMATION
MDXXABA
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
MECHANICAL DATA
SL003
3-pin plastic single-in-line package
This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic
compound. The compound will withstand soldering temperature with no deformation, and circuit performance
characteristics will remain stable when operated in high humidity conditions. Leads require no additional
cleaning or processing when used in soldered assembly.
SL003
4,57 (0.180)
MAX
10,2 (0.400) MAX
6,60 (0.260)
6,10 (0.240)
8,31 (0.327)
MAX
Index
Dot
12,9 (0.492)
MAX
4,267 (0.168)
MIN
1
1,854 (0.073) MAX
2
3
Pin Spacing
2,54 (0.100) T.P.
(see Note A)
2 Places
0,356 (0.014)
0,203 (0.008)
3 Places
0,711 (0.028)
0,559 (0.022)
3 Places
ALL LINEAR DIMENSIONS ARE IN MILLIMETERS AND PARENTHETICALLY IN INCHES
NOTES: A. Each pin centerline is located within 0,25 (0.010) of its true longitudinal position.
B. Body molding flash of up to 0,15 (0.006) may occur in the package lead plane.
PRODUCT
MDXXAD
INFORMATION
15
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
MECHANICAL DATA
D008
tape dimensions
D008 Package (8 pin SOIC) Single-Sprocket Tape
4,10
3,90
8,05
7,95
1,60
1,50
2,05
1,95
0,40
0,8 MIN.
5,55
5,45
6,50
6,30
Direction of Feed
Embossment
Cover
0 MIN.
ø 1,5 MIN.
Carrier Tape
12,30
11,70
Tape
2,2
2,0
ALL LINEAR DIMENSIONS IN MILLIMETERS
NOTES: A. Taped devices are supplied on a reel of the following dimensions:Reel diameter:
Reel hub diameter:
Reel axial hole:
330 +0,0/-4,0 mm
100 ±2,0 mm
13,0 ±0,2 mm
B. 2500 devices are on a reel.
PRODUCT
16
INFORMATION
MDXXAT
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
IMPORTANT NOTICE
Power Innovations Limited (PI) reserves the right to make changes to its products or to discontinue any
semiconductor product or service without notice, and advises its customers to verify, before placing orders, that the
information being relied on is current.
PI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with PI's standard warranty. Testing and other quality control techniques are utilized to the extent PI
deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except as mandated by government requirements.
PI accepts no liability for applications assistance, customer product design, software performance, or infringement
of patents or services described herein. Nor is any license, either express or implied, granted under any patent
right, copyright, design right, or other intellectual property right of PI covering or relating to any combination,
machine, or process in which such semiconductor products or services might be or are used.
PI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE
SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS.
Copyright © 1997, Power Innovations Limited
PRODUCT
INFORMATION
17