POSEICO SPA Via N. Lorenzi 8, 16152 Genova - ITALY Tel. ++ 39 010 6556234 - Fax ++ 39 010 6557519 Sales Office: Tel. ++ 39 010 6556775 - Fax ++ 39 010 6442510 POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation 2-2W5-PI WATER COOLED A.C. SWITCH 1600 V 1275 A 8.4 kA Repetitive voltage up to Maximum continuous RMS current Surge current FINAL SPECIFICATION mag 02 - ISSUE : 01 Symbol Characteristic Tj [°C] Conditions Value Unit BLOCKING VDRM/VRRM Repetitive peak voltage 125 1600 VDSM/VRSM Non-repetitive peak voltage 125 1700 IDRM/IRRM Repetitive peak voltage 125 50 V V mA CONDUCTING I T(RMS) Maximum continuous RMS current 50 Hz, Q = 5 l/min, water temperature = 30°C I TSM Surge on-state current 1275 125 A 8.4 kA 353 x1E3 A²s I² t I² t Max peak one cycle sine wave, 10 ms. Without reverse voltage reapplied V TM Max peak on-state voltage ITM = V T(TO) Threshold voltage 125 0.93 V T On-state slope resistance 125 0.640 mΩ r 1800 A 125 2.08 V SWITCHING di/dt Critical rate of rise of on-state current, min. From 75% VDRM up to 1650 A, gate 10 V - 5 Ω 125 200 A/µs dv/dt Critical rate of rise of off-state voltage, min. Linear ramp up to 70% of VDRM 125 500 V/µs VD=5 V 25 3.5 V GATE V GT Gate trigger voltage I GT Gate trigger current VD=5 V 25 200 mA P GM Max peak gate power Pulse width 100 µs 25 150 W 25 0.09 10 2.5 125 3200 °C/W bar kV °C g MECHANICAL R th(j-w) Press Vins(RMS) Tj max Weight Thermal impedence, DC Max water pressure Insulation voltage rms Max operating junction temperature Junction to water (double side cooled) 1 min Thermal switch open 60°C, cloused 50°C. 10 A - 250 V OUTLINE YO DEVICES TYPE: AT603 foro da M4 x 10 50 55 4 72 27 140 G1 K1 50 15 15 13.5 15 24 108 SCR 2 67.5 SCR 1 54.5 K2 G2 134 2 06.5 ORDERING INFORMATION : 2-2W5-PI S 16 standard specification VDRM&VRRM/100