CM75E3U-24H Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Chopper IGBTMOD™ U-Series Module 75 Amperes/1200 Volts A D P - NUTS (3 PLACES) .47 [12mm] DEEP CM B C2E1 Q(2 PLACES) E2 E2 G2 N C1 E H F G M K T K U J Description: Powerex Chopper IGBTMOD™ Modules are designed for use in switching applications. Each module consists of one IGBT Transistor having a reverse-connected superfast recovery free-wheel diode and an anode-collector connected superfast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. R #110 TAB T S C L Features: □ Low Drive Power □ Low VCE(sat) □ Discrete Super-Fast Recovery Free-Wheel Diode □ High Frequency Operation (15-20kHz) □ Isolated Baseplate for Easy Heat Sinking G2 E2 C2E1 C1 E2 Outline Drawing and Circuit Diagram Dimensions Inches Dimensions Inches A 3.70 94.0 L 0.84 21.2 1.89 48.0 M 0.67 17.0 N 0.28 7.0 P M5 B C Millimeters 1.18 +0.04/-0.02 30.0 +1.0/-0.5 D 3.15±0.01 E 0.43 80.0±0.25 11.0 Q 0.26 Dia. Millimeters M5 6.5 Dia. F 0.16 4.0 R 0.02 4.0 G 0.51 13.0 S 0.30 7.5 H 0.02 0.5 T 0.63 16.0 J 0.53 13.5 U 0.98 25.0 K 0.91 23.0 Applications: □ DC Motor Control □ Boost Regulator Ordering Information: Example: Select the complete module number you desire from the table - i.e. CM75E3U-24H is a 1200V (VCES), 75 Ampere Chopper IGBTMOD™ Power Module. Type Current Rating Amperes VCES Volts (x 50) CM 75 24 131 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM75E3U-24H Chopper IGBTMOD™ U-Series Module 75 Amperes/1200 Volts Absolute Maximum Ratings, Tj = 25 °C unless otherwise specified Ratings Junction Temperature Symbol CM75E3U-24H Units Tj -40 to 150 °C Tstg -40 to 125 °C Collector-Emitter Voltage (G-E SHORT) VCES 1200 Volts Gate-Emitter Voltage (C-E SHORT) VGES ±20 Storage Temperature Collector Current (Tc = 25°C) Volts IC 75 Amperes ICM 150* Amperes IE 75 Amperes Peak Emitter Current** IEM 150* Amperes Maximum Collector Dissipation (Tc = 25°C, Tj ≤ 150°C) Pc 600 Watts Mounting Torque, M5 Main Terminal – 31 in-lb Mounting Torque, M6 Mounting – 40 in-lb Weight – 310 Grams Viso 2500 Volts Peak Collector Current Emitter Current** (Tc = 25°C) Isolation Voltage (Main Terminal to Baseplate, AC 1 min.) * Pulse width and repetition rate should be such that the device junction temperature (Tj) does not exceed Tj(max) rating. **Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). Static Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Collector-Cutoff Current ICES VCE = VCES, VGE = 0V – – 1 mA Gate Leakage Voltage IGES VGE = VGES, VCE = 0V – – 0.5 µA Gate-Emitter Threshold Voltage VGE(th) IC = 7.5mA, VCE = 10V 4.5 6 7.5 Volts Collector-Emitter Saturation Voltage VCE(sat) IC = 75A, VGE = 15V, Tj = 25°C – 2.9 3.7 Volts IC = 75A, VGE = 15V, Tj = 125°C – 2.85 – Volts QG VCC = 600V, IC = 75A, VGE = 15V – 280 – nC Total Gate Charge Emitter-Collector Voltage** VEC IE = 75A, VGE = 0V – – 3.2 Volts Emitter-Collector Voltage VFM IF = 75A, Clamp Diode Part – – 3.2 Volts Test Conditions Min. Typ. Max. – – VCE = 10V, VGE = 0V – – – – VCC = 600V, IC = 75A, – – **Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). Dynamic Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres Resistive Turn-on Delay Time td(on) Load Rise Time Switch Turn-off Delay Time Times Fall Time 3.7 2.2 100 nf nf nf ns tr VGE1 = VGE2 = 15V, – – 200 ns td(off) RG = 4.2V, Resistive – – 250 ns tf Load Switching Operation – – 350 ns Diode Reverse Recovery Time** trr IE = 75A, diE/dt = -150A/µs – – 300 ns Diode Reverse Recovery Charge** Qrr IE = 75A, diE/dt = -150A/µs – 0.41 Diode Reverse Recovery Time trr IF = 75A, Clamp Diode Part – – Diode Reverse Recovery Charge Qrr diF/dt = -150A/µs – 0.41 **Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). 132 11 Units – µC 300 ns – µC Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM75E3U-24H Chopper IGBTMOD™ U-Series Module 75 Amperes/1200 Volts Thermal and Mechanical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Thermal Resistance, Junction to Case Rth(j-c)Q Per IGBT Module – – 0.21 °C/W Thermal Resistance, Junction to Case Rth(j-c)D Per FWDi Module – – 0.47 °C/W Thermal Resistance, Junction to Case Rth(j-c) Clamp Diode Part – – 0.47 °C/W Contact Thermal Resistance Rth(c-f) – 0.035 – °C/W Per Module, Thermal Grease Applied OUTPUT CHARACTERISTICS (TYPICAL) 150 150 12 VGE = 20V 100 11 75 10 50 9 25 8 125 100 75 50 25 0 0 0 2 4 6 8 VGE = 15V Tj = 25°C Tj = 125°C 4 3 2 1 0 0 10 4 8 12 16 0 20 25 50 75 100 125 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) GATE-EMITTER VOLTAGE, VGE, (VOLTS) COLLECTOR-CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) CAPACITANCE VS. VCE (TYPICAL) 103 10 102 Tj = 25°C 8 IC = 150A 6 IC = 75A 4 2 IC = 30A 0 0 4 8 12 16 GATE-EMITTER VOLTAGE, VGE, (VOLTS) 20 CAPACITANCE, Cies, Coes, Cres, (nF) Tj = 25°C EMITTER CURRENT, IE, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) 5 VCE = 10V Tj = 25°C Tj = 125°C COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) 15 COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) Tj = 25oC 125 COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) TRANSFER CHARACTERISTICS (TYPICAL) 102 101 100 1.0 1.5 2.0 2.5 3.0 3.5 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) 150 VGE = 0V f = 1MHz 101 Cies Coes 100 Cres 10-1 10-1 100 101 102 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) 133 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM75E3U-24H Chopper IGBTMOD™ U-Series Module 75 Amperes/1200 Volts HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) td(on) tr 100 100 101 101 100 102 100 Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.21°C/W 10-1 10-1 10-2 10-2 10-3 10-5 TIME, (s) 134 101 10-4 10-3 10-3 NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c) Zth = Rth • (NORMALIZED VALUE) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c) Zth = Rth • (NORMALIZED VALUE) 100 10-1 100 102 101 EMITTER CURRENT, IE, (AMPERES) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT) 10-2 101 Irr COLLECTOR CURRENT, IC, (AMPERES) 10-3 101 trr 102 100 10-2 10-1 100 101 Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.47°C/W 10-1 10-1 10-2 10-2 10-3 10-5 TIME, (s) 10-4 IC = 75A VCC = 400V 15 VCC = 600V 10 5 0 0 100 200 300 GATE CHARGE, QG, (nC) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi) 10-3 101 20 GATE-EMITTER VOLTAGE, VGE, (VOLTS) tf 102 101 di/dt = -150A/µsec Tj = 25°C td(off) REVERSE RECOVERY TIME, trr, (ns) SWITCHING TIME, (ns) VCC = 600V VGE = ±15V RG = 4.2Ω Tj = 125°C GATE CHARGE, VGE 102 REVERSE RECOVERY CURRENT, Irr, (AMPERES) 103 103 10-3 10-3 400