CSD3080H Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Single SCR POW-R-BLOK™ Modules 400 Amperes/800 Volts Description: Powerex Single SCR POW-R-BLOK™ Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on common heatsinks. A B L - DIA. (2 TYP.) A K E K G H M M F Features: .110 TAB K C D G J M Isolated Mounting M Metal Baseplate M Low Thermal Impedance Applications: K A CSD3080H Single SCR POW-R-BLOK™ Modules 400 Amperes/800 Volts G K M Solid State Starters M By-Pass Switch Outline Drawing M AC and DC Motor Control Dimension A B Inches 3.15 2.559±0.012 Millimeters 80 65±0.3 C 2.56 65 D 2.52 64 E 1.81 46 F 1.48 36 G 1.18 30 H 0.87 22 J 0.35 9 K 0.28 7 L M 0.216 Dia. 0.08 Ordering Information: Select the complete eight digit module part number you desire from the table below. Example: CSD3080H is an 800 Volt, 400 Ampere Single SCR POW-R-BLOK™ Module. Type CSD3 Voltage Volts (x100) Current Rating Amperes (400) 08 0H Dia. 5.5 2 S-1 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CSD3080H Single SCR POW-R-BLOK™ Modules 400 Amperes/800 Volts Absolute Maximum Ratings Characteristics Symbol CSD3080H Units Peak Forward Blocking Voltage VDRM VDSM 800 Volts 960 Volts Transient Peak Forward Blocking Voltage (Non-Repetitive) t < 5ms DC Forward Blocking Voltage Peak Reverse Blocking Voltage Transient Peak Reverse Blocking Voltage (Non-Repetitive), t < 5ms DC Reverse Blocking Voltage RMS On-State Current VRSM VR(DC) IT(RMS) 640 Volts 800 Volts 960 Volts 640 Volts 620 Amperes 400 Amperes 8000 Amperes 7300 Amperes Average On-State Current, TC = 66°C Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz) IT(AV) ITSM Peak One-Cycle Surge (Non-Repetitive) On-State Current (50Hz) I2t (for Fusing), 8.3 milliseconds ITSM I2t 267,000 Critical Rate-Of-Rise of On-State Current* di/dt 100 PGM PG(AV) VGFM 10 Watts 3 Watts Peak Gate Power Dissipation Average Gate Power Dissipation Peak Forward Gate Voltage Peak Reverse Gate Voltage Peak Forward Gate Current Storage Temperature Operating Temperature Maximum Mounting Torque M5 Mounting Screw 10 A2sec Amperes/ms Volts VGRM IGFM 5.0 Volts 4.0 Amperes TSTG Tj -40 to 125 — -40 to 125 17 °C °C in.-lb. Maximum Mounting Torque M8 Terminal Screw — 72 in.-lb. Module Weight (Typical) — 450 Grams V Isolation *Tj = 125°C, IG = 1.0A, VD = 1/2 VDRM S-2 VD(DC) VRRM VRMS 2500 Volts Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CSD3080H Single SCR POW-R-BLOK™ Modules 400 Amperes/800 Volts Electrical and Thermal Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions IDRM IRRM Tj = 125°C, VDRM = Rated 40 mA Tj = 125°C, VRRM = Rated 40 mA Conducting State Maximums Peak On-State Voltage VTM ITM = 1200A Switching Minimums Critical Rate-Of-Rise dv/dt Tj = 125°C, VD = 2/3 VDRM Ru(J-C) Ru(C-S) Per Module 0.1 °C/Watt Per Module 0.08 °C/Watt IGT VGT VD = 6V, RL = 2Ω VD = 6V, RL = 2Ω VGDM Tj = 125°C, VD = 1/2 VDRM Blocking State Maximums Forward Leakage Current, Peak Reverse Leakage Current, Peak Thermal Maximums Thermal Resistance, Junction-to-Case Thermal Resistance, Case-to-Sink (Lubricated) Gate Parameters Maximums Gate Current to Trigger Gate Voltage to Trigger Non-Triggering Gate Voltage CSD3080H 1.4 500 100 Units Volts Volts/ms mA 3.0 Volts 0.25 Volts S-3 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CSD3080H Single SCR POW-R-BLOK™ Modules 400 Amperes/800 Volts MAXIMUM ALLOWABLE PEAK SURGE (NON-REPETITIVE) CURRENT 102 10000 Tj = 125oC 2.2 1.8 1.4 1.0 8000 6000 4000 2000 103 104 100 101 MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS) 0.100 0.075 0.050 0.025 0 10-3 10-2 10-1 o 90o 120 u 360o 600 60o RESISTIVE, INDUCTIVE LOAD PER SINGLE ELEMENT 400 u = 30o 180o 200 0 0 100 200 300 400 MAXIMUM AVERAGE ON-STATE POWER DISSIPATION (RECTANGULAR WAVEFORM) MAXIMUM ALLOWABLE CASE TEMPERATURE (RECTANGULAR WAVEFORM) 270o 60o 600 120o 90o DC u = 30o 400 200 u 360o RESISTIVE, INDUCTIVE LOAD PER SINGLE ELEMENT 0 0 160 320 480 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 640 100 PG(AV) = 3.0W Tj = 25oC IGFM = 4.0A VGDM = 0.25V 102 103 104 MAXIMUM ALLOWABLE CASE TEMPERATURE (SINUSOIDAL WAVEFORM) AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 180o IGT = 100mA MAXIMUM ON-STATE POWER DISSIPATION (SINUSOIDAL WAVEFORM) TIME, t, (SECONDS) 800 VGT = 3.0V INSTANTANEOUS GATE CURRENT, IG, (mA) 800 100 MAXIMUM ALLOWABLE CASE TEMPERATURE, TC, (oC) MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS) TRANSIENT THERMAL IMPEDANCE, Zu(J-C)(t), (oC/WATT) 0.125 102 PGM = 10W CYCLES AT 60 HZ INSTANTANEOUS ON-STATE CURRENT, ITM, (AMPERES) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (JUNCTION-TO-CASE) 0 10 101 VGFM = 10V 101 10-1 101 0 102 u 360o 110 RESISTIVE, INDUCTIVE LOAD PER SINGLE ELEMENT 100 90 80 70 60 120o u = 30o 60o 90o 50 0 160 320 180o 270o 480 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 130 120 u 360o 110 RESISTIVE, INDUCTIVE LOAD PER SINGLE ELEMENT 100 90 80 70 u = 30o 60 60o 90o 120o DC 640 180o 50 0 100 200 300 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 130 120 MAXIMUM ALLOWABLE CASE TEMPERATURE, TC, (oC) 0.6 101 S-4 TRIGGERING CHARACTERISTICS INSTANTANEOUS GATE VOLTAGE, VG, (VOLTS) 2.6 MAXIMUM PEAK SURGE (NON-REPETITIVE) CURRENT, ITSM, (AMPERES) INSTANTANEOUS ON-STATE VOLTAGE, VTM, (VOLTS) MAXIMUM ON-STATE CHARACTERISTICS 400