PC 4004-A OUTLINE DIMENSION & BLOCK DIAGRAM 190.0 0.5 183.0 3.5 2.54 2.5 16- 1.0 PAD16- 1.8 4- 3.5 H1 H2 2.0 2 K 27.0 A 41.1 1 15.0 23.16 29.5 54.0 0.5 47.0 (P2.54 x 7) 18.11 17.78 4- 1.0 15 16 3.5 140.45 1.6 2.95 147.0 11.75 166.5 95.0 COM 16 E1 DB7 13 3.53 2.78 SEG 40 SEG 160 CONTROL SIGNALS 2 x 2 0.5 SEGMENT DRIVER x 2 0.07 13 SEG 40 SEGMENT DRIVER x 2 VEE SEG 160 NEGATIVE VOLTAGE GENERATER A K 4.89 E2 CONTROL SIGNALS 2 x 2 0.55 0.07 LCD CONTROLLER LSI2 6.09 DB0 R/W RS Vss Vdd Vo LCD PANEL COM 16 LCD CONTROLLER LSI1 LED BACKLIGHT The tolerance unless classified 0.3mm MECHANICAL SPECIFICATION Overall Size View Area Dot Size Dot Pitch 190.0 x 54.0 147.0 x 29.50 0.50 x 0.55 0.57 x 0.62 Module W /O B/L EL B/L LED B/L ABSOLUTE MAXIMUM RATING PIN ASSIGNMENT Pin no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Symbol DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 E1 R/W RS Vo Vss Vdd E2 Vee A K Function Data bus line Data bus line H2 / H1 4.5 / 9.1 4.5 / 9.1 9.0 / 13.6 Symbol Condition Vdd-Vss 25oC 25oC LCD driving supply voltage Vdd-Vee Input voltage 25oC Vin Item Supply for logic voltage Min. -0.3 -0.3 -0.3 Max. Units V 7 13 V Vdd+0.3 V Data bus line Data bus line Data bus line Data bus line Data bus line Data bus line Enable 1 Data read / write Register select signal Contrast Adjust Item Symbol Condition Min. Typical Max. Units Power supply voltage Vdd-Vss 25oC V 2.7 5.5 Top N W N W N W V 7.9 V -20oC 7.1 7.5 Power supply(GND) Power supply(+) Enable 2 Negative voltage Power supply for LED B/L (+) Power supply for LED B/L ( ) LCM current consumption (No B/L) ELECTRICAL CHARACTERISTICS LCD operation voltage Backlight current consumption Vop Idd LED/edge LED/array 0oC 4.9 4.8 4.8 4.5 6.1 4.6 6.4 4.7 6.7 V V 4.6 4.4 4.5 50oC V 70oC 6.3 V 5.7 6 7 4 Vdd=5V mA VB/L=4.2V mA 220 VB/L=4.2V mA 25oC LCD option: STN, TN, FSTN Backlight Option: LED,EL Backlight feature, other Specs not available on catalog is under request.