PG 12864-Q OUTLINE DIMENSION & BLOCK DIAGRAM H1 7.62 128 x 64 Dots A 2.5MAX 43 1 K Components Area A 1 2.42 3.0 1.0 B 4.0 59.0 0.1 1.5 HOLE2- 1.0 15.0 35.15(A/A) 40.0(V/A) 46.0 50.0 0.5 23.0 (Components Height) K 90.5 0.5 50.0 0.6(PCB) 40.4 46.52 50.0 0.5 3.9 1.8 20 4- 1.5 1.5 (3.77) 1.0 4.5 4.08 (18.6) 2.0 38.0 90.5 0.5 74.0 67.0(V/A) 58.84(A/A) Conductor Side 1 20 (P1.0 x 19) 19.0 21.0 0.3 0.1 1.7 0.5 0.05 1.75 1.0 1.0 2.0 ( 1.5)1.2 0.42 0.04 2.0 0.75 COM 64 DB7~DB0 Vss Vdd Vo Ao R/W E CS1 P/S RST C86 A K LCD CONTROLLER LSI LCD PANEL SEG 128 BACKLIGHT The tolerance unless classified 0.3mm MECHANICAL SPECIFICATION Overall Size View Area Dot Size Dot Pitch 90.5 x 52.0 67.0 x 40.0 0.42 x 0.5 0.46 x 0.55 Module W /O B/L EL B/L LED B/L ABSOLUTE MAXIMUM RATING PIN ASSIGNMENT Pin no. 1 2 3 4 5 6 7-14 15 16 17 18 19 20 Symbol Function Power supply(GND) Vss Power supply(+) Vdd Contrast Adjust Vo Command / data input A0 Data read / write signal(/RW) R/W E Enable signal Data bus line DB0-DB7 CS1 Chip select Parallel/serial interface select P/S Reset RST 8080 / 6800 select C86 A Power supply for LED B/L (+) K Power supply for LED B/L ( ) H2 / H1 / 7.5 / / 7.5 Symbol Condition Vdd-Vss 25oC 25oC LCD driving supply voltage Vdd-Vee Input voltage 25oC Vin Item Supply for logic voltage Min. -0.3 -0.3 -0.3 Max. Units V 7.0 18.0 V Vdd+0.3 V ELECTRICAL CHARACTERISTICS Item Symbol Condition Min. Typical Max. Units 1.8 Power supply voltage Vdd-Vss 5.5 25oC V Top N W N W N W V 10.4 9.9 10.2 -20oC V LCD operation voltage Vop 0oC 25oC 8.4 9.0 9.4 50oC 70oC LCM current consumption (No B/L) Backlight current consumption Idd 7.8 8.0 Vdd=5V 1.0 LED/edge VB/L=3.5V 20 LED/array VB/L=4.2V LCD option: STN, TN, FSTN Backlight Option: LED,EL Backlight feature, other Specs not available on catalog is under request. 8.3 2.5 V V V V mA mA mA