TI TS5A12301E

TS5A12301E
www.ti.com ................................................................................................................................................................................................ SCES707 – AUGUST 2008
IEC LEVEL 4 ESD-PROTECTED 0.75-Ω SPDT ANALOG SWITCH
WITH 1.8-V COMPATIBLE INPUT LOGIC
FEATURES
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
1
•
•
•
•
Low ON-State Resistance (0.75 Ω)
Low Charge Injection
Excellent ON-State Resistance Matching
Isolation in Power-Down Mode, V+ = 0
Specified Break-Before-Make Switching
2.25-V to 5.5-V Power Supply (V+)
6-MΩ Input Pulldown Allows Control Input (IN)
to Be Unconnected
1.8-V Compatible Control Input Threshold
Indepedent of V+
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Performance Tested Per JESD 22
– 3000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
ESD Performance COM Port to GND
– 8000-V Human-Body Model
(A114-B, Class II)
– ±8-kV Contact Discharge
(IEC 61000-4-2)
– ±15-kV Air-Gap Discharge
(IEC 61000-4-2)
Cell Phones
PDAs
Portable Instrumentation
MP3 Players
Portable Media Players
YFP PACKAGE
C
C
B
B
A
A
2 1
(Laser Marking View)
1 2
(Bump View)
TERMINAL ASSIGNMENTS
C
V+
NC
B
COM
GND
A
IN
NO
2
1
DESCRIPTION/ORDERING INFORMATION
The TS5A12301E is a single-pole double-throw (SPDT) analog switch that is designed to operate from 2.25 V to
5.5 V. The device offers a low ON-state resistance with an excellent channel-to-channel ON-state resistance
matching, and the break-before-make feature to prevent signal distortion during the transferring of a signal from
one path to another.
The device has excellent total harmonic distortion (THD) performance and consumes very low power. These
features make this device suitable for portable audio applications. The control input (IN) pin can be connected to
low-voltage GPIOs, allowing it to be controlled by 1.8-V signals.
The TS5A12301E has ±15-kV Air-Gap Discharge and ±8-kV Contact Discharge ESD protection for the COM port
to GND, which make it compliant with the IEC Level 4 ESD standard (IEC 61000-4-2).
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008, Texas Instruments Incorporated
TS5A12301E
SCES707 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
ORDERING INFORMATION
TA
PACKAGE
–40°C to 85°C
(1)
(2)
(3)
(1) (2)
WCSP (DSBGA)
0.4-mm Pitch – YFP (Pb-free)
ORDERABLE PART NUMBER
Tape and reel
TS5A12301EYFPR
TOP-SIDE MARKING (3)
_ _ _ 3W_
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
YFP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).
SUMMARY OF CHARACTERISTICS (1)
2:1 Multiplexer/Demultiplexer
(1 × SPDT)
Configuration
Number of channels
1
ON-state resistance (ron)
0.75 Ω max
ON-state resistance match (Δron)
0.1 Ω max
0.1 Ω max
ON-state resistance flatness (ron(flat))
Turn-on/turn-off time (tON/tOFF)
110 ns/100 ns
Break-before-make time (tBBM)
10 ns
Charge injection (QC)
97 pC
Bandwidth (BW)
55 MHz
OFF isolation (OISO)
–63 dB at 1 MHz
Crosstalk (XTALK)
–63 dB at 1 MHz
Total harmonic distortion (THD)
0.003%
Leakage current (INO(OFF)/INC(OFF))
Package option
(1)
20 nA
6-pin WCSP, 0.4-mm pitch
V+ = 5 V, TA = 25°C
FUNCTION TABLE
NC TO COM,
COM TO NC
NO TO COM,
COM TO NO
L or Open
ON
OFF
H
OFF
ON
IN
2
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
TS5A12301E
www.ti.com ................................................................................................................................................................................................ SCES707 – AUGUST 2008
ABSOLUTE MAXIMUM RATINGS (1) (2)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
V+
Supply voltage range (3)
–0.5
6.5
V
VNC
VNO
VCOM
Analog voltage range (3) (4) (5)
–0.5
V+ + 0.5
V
IIK
Analog port diode current
–50
50
INC
INO
ICOM
On-state switch current
–200
200
–400
400
VI
Digital input voltage range (3) (4)
–0.5
6.5
IIK
Digital input clamp current
I+
IGND
Continuous current through V+ or GND
Tstg
Storage temperature range
(1)
(2)
(3)
(4)
(5)
(6)
On-state peak switch current
V+ < VNC, VNO, VCOM or
VNC, VNO, VCOM < 0
VNC, VNO, VCOM = 0 to V+
(6)
VI < 0
–50
UNIT
mA
mA
V
mA
–100
100
mA
–65
150
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All voltages are with respect to ground, unless otherwise specified.
The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
This value is limited to 5.5 V maximum.
Pulse at 1-ms duration < 10% duty cycle
THERMAL IMPEDANCE RATINGS
UNIT
θJA
(1)
Package thermal impedance
(1)
YFP package
154.2
°C/W
The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
3
TS5A12301E
SCES707 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (1)
V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX UNIT
Analog Switch
Analog signal range
VCOM,
VNO, VNO
ON-state resistance
ron
VNO or VNC = 2.5 V,
ICOM = –100 mA,
See Figure 14
ON-state resistance
match between
channels
Δron
VNO or VNC = 2.5 V,
ICOM = –100 mA,
See Figure 14
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
See Figure 14
VNO or VNC = 1 V, 1.5 V,
2.5 V,
ICOM = –100 mA,
See Figure 14
ON-state resistance
flatness
ron(flat)
INO(OFF),
INC(OFF)
NO, NC
OFF leakage current
INO(PWROFF),
INC(PWROFF)
NC, NO
ON leakage current
INO(ON)
COM
ON leakage current
ICOM(ON)
COM
OFF leakage current
ICOM(PWROFF)
0
VNO = 1 V, 4.5 V,
VCOM = 4.5 V, 1 V,
VNC = Open,
or
VNO = 1 V, 4.5 V,
VCOM = 4.5 V, 1 V,
VNO = Open,
25°C
Full
0.5
4.5 V
0.05
4.5 V
4.5 V
VNO or VNC = 0 to 5.5 V,
VCOM = 5.5V to 0
25°C
VNO = 1 V, 4.5 V,
VCOM, VNC = Open,
or
VNC = 1 V, 4.5 V,
VCOM, VNO = Open,
25°C
Full
See Figure 16
VCOM = 1 V, 4.5 V,
VNO and VNC = Open,
or
VCOM = 1 V, 4.5 V,
VNO or VNC = Open,
See Figure 16
VNO or VNC = 0 to 5.5 V,
VCOM = 5.5V to 0
See Figure 15
Full
0.1
–20
5.5 V
0V
25°C
Full
0.2
5.5 V
Ω
0V
20
100
–10
10
–10
10
2
–200
–20
5.5 V
2
–100
–20
25°C
Full
Ω
0.25
25°C
See Figure 15
Ω
0.15
Full
Full
V
0.1
0.1
25°C
25°C
0.75
0.8
25°C
Full
V+
µA
20
200
2
nA
nA
20
–200
200
–10
10
–10
10
nA
µA
Digital Control Input (IN)
Input logic high
VIH
Full
5.5 V
1.05
5.5
Input logic low
VIL
Full
5.5 V
0
0.65
V
VI = 1.95 V or 0
Full
5.5 V
–0.05
0.5
µA
VI = 1.95 V
Full
5.5 V
Input leakage current
Input resistance
(1)
4
IIH, IIL
rIN
6
V
MΩ
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
TS5A12301E
www.ti.com ................................................................................................................................................................................................ SCES707 – AUGUST 2008
ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (continued)
V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL= 35 pF,
See Figure 18
25°C
5V
Full
4.5 V
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
25°C
5V
Full
4.5 V
Break-before-make
time
tBBM
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
25°C
5V
1
Full
4.5 V
1
Charge injection
QC
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 23
25°C
5V
97
pC
NO
OFF capacitance
CNO(OFF)
VNC or VNO = V+ or
GND,
Switch OFF,
See Figure 17
25°C
5V
28
pF
NC, NO
ON capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or
GND,
Switch ON,
See Figure 17
25°C
5V
112
pF
COM
ON capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 17
25°C
5V
112
pF
VI = V+ or GND,
See Figure 17
25°C
5V
3
pF
Digital input
capacitance
CI
110
225
250
100
215
225
10
15
20
ns
ns
ns
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 20
25°C
5V
55
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
See Figure 21
25°C
5V
–63
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
See Figure 22
25°C
5V
–63
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20
kHz,
See Figure 24
25°C
5V
0.003
%
Full
5.5 V
Supply
Positive supply
current
I+
VI = V+ or GND
10
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
µA
5
TS5A12301E
SCES707 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (1)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal range
VCOM,
VNO
ON-state resistance
ron
ON-state resistance
match between
channels
Δron
ON-state resistance
flatness
ron(flat)
INO(OFF),
INC(OFF)
NO, NC
OFF leakage current
0
VNO or VNC = 2 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
VNO or VNC = 2 V, 0.8 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 14
VNO or VNC = 0.8 V, 2 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
VNO = 1 V, 3 V,
VCOM = 3 V, 1 V,
VNC = Open,
or
VNC = 1 V, 3 V,
VCOM = 3 V, 1 V,
VNO = Open,
INO(PWROFF),
INC(PWROFF)
VNO or VNC = 0 to 3.6 V,
VCOM = 3.6V to 0
INO(ON)
VNO = 1 V, 3 V,
VNC and VCOM = Open,
or
VNC = 1 V, 3 V,
VNO and VCOM = Open,
NC, NO
ON leakage current
COM
ON leakage current
ICOM(ON)
COM
OFF leakage current
ICOM(PWROFF)
25°C
Full
0.1
Full
25°C
Full
3V
See Figure 16
VNO or VNC = 0 to 3.6 V,
VCOM = 3.6 V to 0
See Figure 15
Full
0.1
–20
3.6 V
0V
25°C
Full
0.2
3.6 V
Ω
0V
20
50
–10
10
–10
10
2
–100
–20
3.6 V
2
–50
–20
25°C
Full
Ω
0.3
25°C
Switch ON,
See Figure 16
Ω
0.2
Full
Switch OFF,
See Figure 15
V
0.15
0.15
25°C
25°C
0.9
1.2
3V
25°C
VCOM = 1 V,
VNO and VNC = Open,
or
VCOM = 3 V,
VNO and VNC = Open,
0.75
3V
25°C
Full
V+
µA
20
100
2
nA
nA
20
–100
100
–10
10
–10
10
1.05
5.5
nA
µA
Digital Control Input (IN)
Input logic high
Input logic low
Input leakage current
Input resistance
(1)
6
VIH
VIL
IIH, IIL
rIN
Full
3.6 V
V
Full
3.6 V
0
0.65
V
VI = 1.95 V or 0
Full
3.6 V
–0.05
0.5
µA
VI = 1.95 V
Full
3.6 V
6
MΩ
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
TS5A12301E
www.ti.com ................................................................................................................................................................................................ SCES707 – AUGUST 2008
ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (continued)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
72
175
UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL= 35 pF,
See Figure 18
25°C
3.3 V
Full
3V
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
25°C
3.3 V
Full
3V
Break-before-make
time
tBBM
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
25°C
3.3 V
1
Full
3V
1
Charge injection
QC
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 23
25°C
3.3V
97
pC
NO
OFF capacitance
CNO(OFF)
VNO = V+ or GND,
Switch OFF,
See Figure 17
25°C
3.3 V
28
pF
NC, NO
ON capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 17
25°C
3.3 V
115
pF
COM
ON capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 17
25°C
3.3 V
115
pF
VI = V+ or GND,
See Figure 17
25°C
3.3 V
3
pF
Digital input
capacitance
CI
185
105
165
170
16
30
35
ns
ns
ns
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 20
25°C
3.3 V
54
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
See Figure 21
25°C
3.3 V
–63
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
See Figure 22
25°C
3.3 V
–63
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20
kHz,
See Figure 24
25°C
3.3 V
0.004
%
25°C
3.6 V
Supply
Positive supply
current
I+
VI = 1.95 V or GND
10
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
µA
7
TS5A12301E
SCES707 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1)
V+ = 2.25 V to 2.75 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal range
VCOM,
VNO
ON-state resistance
ron
VNO or VNC = 1.8 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
ON-state resistance
match between
channels
Δron
VNO or VNC = 1.8 V,
0.8 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 14
VNO or VNC = 0.8 V, 1 V,
1.8 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
ON-state resistance
flatness
ron(flat)
INO(OFF),
INC(OFF)
NO, NC
OFF leakage current
INO(PWROFF),
INC(PWROFF)
NC, NO
ON leakage current
INO(ON)
COM
ON leakage current
ICOM(ON)
COM
OFF leakage current
ICOM(PWROFF)
0
VNO = 0.5 V, 2.2 V,
VCOM = 2.2 V, 0.5 V,
VNC = Open,
or
VNC = 0.5 V, 2.2 V,
VCOM = 2.2 V, 0.5 V,
VNO = Open,
Full
Switch OFF,
See Figure 15
Full
0.15
2.25 V
Full
2.25 V
VCOM = 0.5 V,
VNO and VNC = Open,
or
VCOM = 2.2 V,
VNO and VNC = Open,
Switch ON,
See Figure 16
VNO or VNC = 0 to 2.75 V,
VCOM = 2.75 V to 0
See Figure 15
0.25
–20
2.75 V
0V
25°C
Full
0.5
2.75 V
Ω
0V
20
50
–10
10
–10
10
2
–100
–20
2.75 V
2
–50
–20
25°C
Full
Ω
0.6
25°C
Full
Ω
0.4
Full
Full
V
0.2
0.2
25°C
25°C
1.3
1.6
25°C
25°C
Switch ON,
See Figure 16
1.1
2.25 V
25°C
VNO or VNC = 0 to 2.75 V,
VCOM = 2.75 V to 0
VNO = 0.5 V, 2.2 V,
VNC and VCOM = Open,
or
VNC = 2.2 V, 0.5 V,
VNO and VCOM = Open,
25°C
V+
µA
20
100
2
nA
nA
20
–100
100
–10
10
–10
10
nA
µA
Digital Control Input (IN)
Input logic high
VIH
Full
2.75 V
1.05
5.5
Input logic low
VIL
Full
2.75 V
0
0.65
V
VI = 1.95 V or 0
Full
2.75 V
–0.05
0.5
µA
VI = 1.95 V
Full
2.75 V
Input leakage current
Input resistance
(1)
8
IIH, IIL
rIN
6
V
MΩ
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
TS5A12301E
www.ti.com ................................................................................................................................................................................................ SCES707 – AUGUST 2008
ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (continued)
V+ = 2.25 V to 2.75 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
97
170
UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL= 35 pF,
See Figure 18
25°C
2.5 V
Full
2.25 V
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
25°C
2.5 V
Full
2.25 V
Break-before-make
time
tBBM
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
25°C
2.5 V
5
Full
2.25 V
5
Charge injection
QC
VGEN = 0,
RGEN = 0,
CL = 1 nF,
See Figure 23
25°C
2.5 V
82
pC
NO
OFF capacitance
CNO(OFF)
VNO = V+ or GND,
Switch OFF,
See Figure 17
25°C
2.5 V
29
pF
NC, NO
ON capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 17
25°C
2.5 V
116
pF
COM
ON capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 17
25°C
2.5 V
116
pF
VI = V+ or GND,
See Figure 17
25°C
2.5 V
3
pF
Digital input
capacitance
CI
175
80
155
160
18
35
40
ns
ns
ns
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 20
25°C
2.5 V
54
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
See Figure 21
25°C
2.5 V
–63
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
See Figure 22
25°C
2.5 V
–63
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20
kHz,
See Figure 24
25°C
2.5 V
0.008
%
Full
2.75 V
Supply
Positive supply
current
I+
VI = 1.95 V or GND
10
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
µA
9
TS5A12301E
SCES707 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
TYPICAL PERFORMANCE
1.2
1.0
1.2
TA = 85°C
1.0
0.8
TA = 25°C
ron (Ω)
ron (Ω)
0.8
0.6
0.4
TA = 85°C
0.6
TA = 25°C
0.4
TA = –40°C
TA = –40°C
0.2
0.2
0.0
0.0
1.1
2.3
VCOM (V)
3.4
0.0
0.0
4.5
Figure 1. ron vs VCOM (V+ = 2.25 V)
1.1
2.3
VCOM (V)
4.5
3.4
Figure 2. ron vs VCOM (V+ = 3 V)
1.2
1.0
ron (Ω)
0.8
0.6
0.4
0.2
0.0
0.0
TA = 85°C
TA = 25°C
TA = –40°C
1.1
2.3
VCOM (V)
3.4
4.5
(°C)
Figure 3. ron vs VCOM (V+ = 4.5 V)
Figure 4. Leakage Current vs Temperature (V+ = 5 V)
6.0
6.0
Control input (IN) high
5.0
V+ = 4.5 V
VOUT (V)
4.0
I+ (μA)
V+ = 5.5 V
5.0
Control input (IN) low
3.0
4.0
2.0
2.0
1.0
1.0
0.0
V+ = 3.6 V
V+ = 3 V
V+ = 2.75 V
V+ = 2.25 V
3.0
0.0
0.0
1.0
2.0
3.0
4.0
5.0
0.0
V+ (V)
2.0
3.0
4.0
5.0
6.0
VIN (V)
Figure 5. I+ vs V+ (TA = 25°C)
10
1.0
Submit Documentation Feedback
Figure 6. Control Input Thresholds
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
TS5A12301E
www.ti.com ................................................................................................................................................................................................ SCES707 – AUGUST 2008
TYPICAL PERFORMANCE (continued)
200
185
180
tON (NO)
165
tON/tOFF (ns)
160
tON/tOFF (ns)
140
tOFF (NC)
120
100
80
tON (NC)
60
125
105
85
65
40
tOFF (NO)
tON (NO)
45
tOFF (NO)
20
25
–40
0
0
1
2
3
V+ (V)
4
5
20
40
60
80
100
Temperature (°C)
Figure 8. tON/tOFF vs Temperature
20
0
10
–2
0
V+ = 5 V
–4
Gain (dB)
–10
V+ = 3 V
–20
–30
0
–20
6
Figure 7. tON/tOFF vs Supply Voltage
QC (pC)
tOFF (NC)
tON (NC)
145
V+ = 2.5 V
–6
–8
–40
–10
–50
–12
–60
–14
0.0
1.0
2.0
3.0
4.0
5.0
0.1
6.0
1
10
100
Frequency (MHz)
1000
VCOM (V)
Figure 10. Gain vs Frequency
0
–10
–20
–30
–40
–50
–60
–70
–80
–90
–100
Attenuation (dB)
Attenuation (dB)
Figure 9. Charge Injection (QC) vs VCOM
0.1
1
10
100
1000
0
–10
–20
–30
–40
–50
–60
–70
–80
–90
–100
0.1
Frequency (MHz)
1
10
100
1000
Frequency (MHz)
Figure 11. OFF Isolation vs Frequency
Figure 12. Crosstalk vs Frequency
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
11
TS5A12301E
SCES707 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
THD (%)
TYPICAL PERFORMANCE (continued)
0.01
0.009
0.008
0.007
0.006
0.005
0.004
0.003
0.002
0.001
0
V+ = 2.5 V
V+ = 3 V
V+ = 5 V
10
100
1000
10000
100000
Frequency (Hz)
Figure 13. Total Harmonic Distortion (THD) vs Frequency
12
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
TS5A12301E
www.ti.com ................................................................................................................................................................................................ SCES707 – AUGUST 2008
PARAMETER MEASUREMENT INFORMATION
V+
VNO NO
COM
+
VCOM
Channel ON
r on
VI
ICOM
IN
VCOM VNO
I COM
VI = V IH or V IL
+
GND
Figure 14. ON-State Resistance (ron)
V+
VNO NO
COM
+
VCOM
+
VI
OFF-State Leakage Current
Channel OFF
VI = V IH or V IL
IN
+
GND
Figure 15. OFF-State Leakage Current (ICOM(OFF), INC(OFF), ICOM(PWROFF), INC(PWR(FF))
V+
VNO NO
COM
+
VI
VCOM
ON-State Leakage Current
Channel ON
VI = V IH or V IL
IN
+
GND
Figure 16. ON-State Leakage Current (ICOM(ON), INC(ON))
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
13
TS5A12301E
SCES707 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
PARAMETER MEASUREMENT INFORMATION (continued)
V+
VNO
NO
Capacitance
Meter
VBIAS = V+ or GND and
COM
COM
VI
IN
VI = VIH or VIL
Capacitance is measured at NO,
COM, and IN inputs during ON
and OFF conditions.
VBIAS
GND
Figure 17. Capacitance (CI, CCOM(OFF), CCOM(ON), CNC(OFF), CNC(ON))
V+
NO
VCOM
VI
Logic
Input(1)
VNO
TEST
RL
CL
VCOM
tON
50 Ω
35 pF
V+
tOFF
50 Ω
35 pF
V+
COM
CL(2)
IN
GND
RL
V+
Logic
Input
(VI)
50%
50%
0
tON
Switch
Output
(VNO)
tOFF
90%
90%
A.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf
< 5 ns.
B.
CL includes probe and jig capacitance.
Figure 18. Turn-On (tON) and Turn-Off Time (tOFF)
14
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
TS5A12301E
www.ti.com ................................................................................................................................................................................................ SCES707 – AUGUST 2008
PARAMETER MEASUREMENT INFORMATION (continued)
V+
NC or NO
V+
Logic
Input
(VI)
VNC or V NO
VCOM
50%
0
COM
NC or NO
CL(2)
VI
Switch
Output
(VCOM)
RL
IN
90%
90%
tBBM
Logic
Input(1)
VNC or V NO = V+/2
RL = 50 Ω
CL = 35 pF
GND
A.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf
< 5 ns.
B.
CL includes probe and jig capacitance.
Figure 19. Break-Before-Make Time (tBBM)
V+
Network Analyzer
50
VNO
NO
Channel ON: NO to COM
COM
VCOM
Source
Signal
VI = V IH or V IL
Network Analyzer Setup
50
VI
+
IN
Source Power = 0 dBm
(632-mV P-P at 50-Ω load)
GND
DC Bias = 350 mV
Figure 20. Bandwidth (BW)
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
15
TS5A12301E
SCES707 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
PARAMETER MEASUREMENT INFORMATION (continued)
V+
Network Analyzer
50 Ω
VNO
NO
Channel OFF: NO to COM
COM
50 Ω
Source
Signal
VCOM
VI = V IH or V IL
Network Analyzer Setup
50
VI
IN
Source Power = 0 dBm
(632-mV P-P at 50-Ω load)
+
GND
DC Bias = 350 mV
Figure 21. OFF Isolation (OISO)
V+
Network Analyzer
Channel ON: NC to COM
50 W
VNC
Channel OFF: NO to COM
NC
VCOM
Source
Signal
VNO
NO
VI
50 W
+
VI = V+ or GND
50 W
IN
GND
Network Analyzer Setup
Source Power = 0 dBm
(632-mV P-P at 50-W load)
DC Bias = 350 mV
Figure 22. Crosstalk (XTALK)
16
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
TS5A12301E
www.ti.com ................................................................................................................................................................................................ SCES707 – AUGUST 2008
PARAMETER MEASUREMENT INFORMATION (continued)
V+
RGEN
VGEN
Logic
Input
(VI)
VIH
OFF
ON
OFF V
IL
NO
COM
+
VCOM
VCOM
∆VCOM
CL(1)
VI
VGEN = 0 to V+
IN
Logic
Input(2)
RGEN = 0
CL = 1 nF
QC = CL X ∆VCOM
VI = V IH or V IL
GND
A.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf
< 5 ns.
B.
CL includes probe and jig capacitance.
Figure 23. Charge Injection (QC)
Channel ON: COM to NO
VSOURCE = V+ P-P
VI = VIH or VIL
RL = 600 Ω
fSOURCE = 20 Hz to 20 kHz
CL = 50 pF
V+/2
Audio Analyzer
NO
Source
Signal
COM
CL(1)
600
VI
IN
600
-V +/2
A.
CL includes probe and jig capacitance.
Figure 24. Total Harmonic Distortion (THD)
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TS5A12301E
17
PACKAGE OPTION ADDENDUM
www.ti.com
14-Aug-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
TS5A12301EYFPR
ACTIVE
DSBGA
YFP
Pins Package Eco Plan (2)
Qty
6
3000 Green (RoHS &
no Sb/Br)
Lead/Ball Finish
SNAGCU
MSL Peak Temp (3)
Level-1-260C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Aug-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
TS5A12301EYFPR
Package Package Pins
Type Drawing
SPQ
DSBGA
3000
YFP
6
Reel
Reel
Diameter Width
(mm) W1 (mm)
180.0
8.4
Pack Materials-Page 1
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
0.9
1.3
0.6
4.0
W
Pin1
(mm) Quadrant
8.0
Q1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Aug-2008
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TS5A12301EYFPR
DSBGA
YFP
6
3000
220.0
220.0
34.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
RF/IF and ZigBee® Solutions
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lprf
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated