BAW56-V-G Vishay Semiconductors Small Signal Switching Diode, Dual Features • Silicon Epitaxial Planar Diode • Fast switching dual diode with common anode • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC 2 3 1 1 2 3 17033 Mechanical Data Case: SOT-23 Weight: approx. 8.1 mg Packaging Codes/Options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box Parts Table Part BAW56-V-G Ordering Code Type Marking Remarks BAW56-V-G-18 or BAW56-V-G-08 JDG Tape and reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test Condition Repetitive peak reverse voltage = Working peak reverse voltage = DC Blocking voltage Unit VR = VRRM 70 V IF 250 mA IFSM 2 A tp = 1 ms IFSM 1 A tp = 1 s IFSM 0.5 A 1) mW Symbol Value Unit RthJA 430 K/W Ptot Power dissipation 1) Value tp = 1 µs Forward continuous current Non repetitive peak forward current Symbol 350 Device on fiberglass substrate Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Thermal resistance junction to ambient air Junction temperature Storage temperature range 1) Test condition Tj 150 °C Tstg - 65 to + 150 °C Device on fiberglass substrate For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Document Number 85872 Rev. 1.0, 04-May-11 BAW56-V-G Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Forward voltage Reverse current Diode capacitance Reverse recovery time Test Condition Symbol IF = 1 mA VF IF = 10 mA Min. Typ. Max. Unit 715 mV VF 855 mV IF = 50 mA VF 1000 mV IF = 150 mA VF 1250 mV µA VR = 70 V IR 2.5 VR = 70 V, Tj = 150 °C IR 100 µA VR = 25 V, Tj = 150 °C IR 30 µA VF = VR = 0, f = 1 MHz CD 2 pF IF = 10 mA to IR = 1 mA, VR = 6 V, RL = 100 trr 6 ns Typical Characteristics Tamb = 25 °C, unless otherwise specified IF - Forward Current (mA) 1000 100 Tj = 100 °C 10 25 °C 1 0.1 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 14356 Figure 1. Forward Current vs. Forward Voltage www.vishay.com 22290 V F - Forward Voltage (V) Figure 2. Peak forward current IFM = f (tp) For technical questions within your region, please contact one of the following: Document Number 85872 [email protected], [email protected], [email protected] Rev. 1.0, 04-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 2 BAW56-V-G Vishay Semiconductors Package Dimensions in millimeters (inches): SOT-23 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t o 0.5 (0.020) 0.45 (0.018) 0.9 (0.035) 1.15 (0.045) 8° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.550 ref. (0.022 ref.) 0.1 (0.004) max. 3.1 (0.122) 2.8 (0.110) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) 0.7 (0.028) 0.95 (0.037) 0.9 (0.035) 1.43 (0.056) 1 (0.039) 0.9 (0.035) Foot print recommendation: 2 (0.079) 1 (0.039) 0.9 (0.035) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 0.95 (0.037) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Document Number 85872 www.vishay.com For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.0, 04-May-11 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000