PHOTODARLINGTON OPTOCOUPLERS DESCRIPTION The CNX48U, H11BX, MOC8080 and TIL113 have a gallium arsenide infrared emitter optically coupled to a silicon planar photodarlington. CNX48U H11B1 MOC8080 TIL113 H11B2 H11B255 H11B3 FEATURES • High sensitivity to low input drive current • Meets or exceeds all JEDEC Registered Specifications • VDE 0884 approval available as a test option -add option .300. (e.g., H11B1.300) 6 1 6 SCHEMATIC 1 ANODE 1 6 BASE APPLICATIONS • • • • • Low power logic circuits 6 Telecommunications equipment Portable electronics Solid state relays Interfacing coupling systems of different potentials and impedances. Parameter CATHODE 2 5 COLLECTOR N/C 3 1 4 EMITTER Symbol Device Value Units TSTG All -55 to +150 °C Operating Temperature TOPR All -55 to +100 °C Lead Solder Temperature TSOL All 260 for 10 sec °C 250 mW 3.3 mW/°C TOTAL DEVICE Storage Temperature Total Device Power Dissipation @ TA = 25°C Derate above 25°C EMITTER Continuous Forward Current Reverse Voltage Forward Current - Peak (300 µs, 2% Duty Cycle) LED Power Dissipation @ TA = 25°C Derate above 25°C PD All IF All 100 mA VR All 6 V IF(pk) All PD DETECTOR All CNX48U, TIL113 H11B1, H11B2 Collector-Emitter Breakdown Voltage BVCEO H11B3 H11B255 MOC8080 3.0 A 100 mW 1.8 mW/°C 30 25 V 55 CNX48U, H11B1 H11B2, H11B3 Collector-Base Breakdown Voltage BVCBO MOC8080 Detector Power Dissipation @ TA = 25°C Derate above 25°C V 55 V 7 V TIL113 H11B255 Emitter-Collector Breakdown Voltage 30 BVECO All PD All 150 mW 2.0 mW/°C 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 MOC8080 TIL113 ELECTRICAL CHARACTERISTICS H11B2 H11B255 H11B3 (TA = 25°C Unless otherwise specified.) INDIVIDUAL COMPONENT CHARACTERISTICS Parameter Test Conditions Symbol EMITTER H11B255 (IF = 10 mA) MOC8080 VF (IF = 10 mA, TA = -55°C) (IF = 50 mA) Capacitance DETECTOR Collector-Emitter Breakdown Voltage Typ** Max 0.8 1.2 1.5 1.2 1.3 0.9 1.3 1.7 0.7 TIL113 CNX48U MOC8080 (IF = 10 mA, TA = 100°C) Reverse Leakage Current Min Unit H11B1, H11B2 (IF = 10 mA) Input Forward Voltage Device 1.05 1.4 H11B3 1.35 1.5 10 (VR = 6 V) IR All 0.001 (VF = 0 V, f = 1.0 MHz) C All 50 (IC = 1 mA, IF = 0) (IC = 100 µA, IF = 0) CNX48U BVCEO (IC = 10 mA, IF = 0) 30 60 25 60 55 70 30 100 V µA pF TIL113 H11B1, H11B2 H11B3 (IC = 100 µA, IF = 0) H11B255 (IC = 1 mA, IF = 0) MOC8080 V CNX48U, H11B1 Collector-Base (IC = 100 µA, IE = 0) H11B2, H11B3 BVCBO Breakdown Voltage H11B255 (IC = 100 µA, IF = 0) Emitter-Collector Breakdown Voltage Collector-Emitter Dark Current TIL113 MOC8080 (IE = 100 µA, IB = 0) BVECO All (VCE = 10 V, Base Open) ICEO All V 55 100 7 10 1 V 100 nA Note ** Typical values at TA = 25°C 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 MOC8080 TIL113 TRANSFER CHARACTERISTICS DC Characteristics Test Conditions Symbol (IF = 10 mA, VCE = 1 V) Current(1) Device Min MOC8080 50 (500) H11B255 10 (100) CNX48U 60 (600) TIL113 30 (300) H11B1 5 (500) IC (CTR) (IF = 1 mA, VCE = 5 V) (IF = 1 mA, VCE = 1 V) H11B3 5 (500) 1.75 (350) 1.0 CNX48U 1.0 H11B255 1.0 (IF = 8 mA, IC = 2 mA) TIL113 1.25 (IC = 10 mA, VCE = 10 V) (RL = 100 1) (Fig.7) toff (IF = 10 mA, VCC = 5 V) H11B1 ton V 25 H11B2 H11B255 18 H11B3 ton 3.5 (Fig. 8) toff 36 (IF = 1 mA, VCC = 5 V) ton (RE = 100 1), (RBE = 1M1) Units mA (%) H11B3, MOC8080 VCE(sat) Max (IF = 50 mA, IC = 50 mA) AC Characteristics Switching Times 2 (200) 1 (100) Typ** H11B1, H11B2 (IF =1 mA, IC = 1 mA) (IF = 5 mA, IC = 10 mA) H11B2 H11B3 CNX48U (IF = 0.5 mA, VCE = 1 V) Saturation Voltage H11B255 (TA = 25°C Unless otherwise specified.) (IF = 10 mA, VCE = 5 V) Collector Output H11B2 µs CNX48U 70 (RE = 1k1), (RBE = 10M1) (Fig. 8) toff (IF = 5 mA, VCC = 10 V) ton (RL = 100 1) (Fig.7) toff (IF = 200 mA, IC = 50 mA) ton (VCC = 10 V) (RL = 100 1) (Fig.7) 190 3.5 MOC8080 25 0.35 5 55 100 Typ** Max TIL113 toff ISOLATION CHARACTERISTICS Characteristic Input-Output Isolation Voltage(2) Isolation Resistance(2) Isolation Capacitance(2) Test Conditions Symbol (II-O 61 µA, Vrms, t = 1 min.) Min 5300 Units Vac(rms) (VI-O = 500 VDC) RISO 1011 1 (VI-O = , f = 1 MHz) CISO 0.8 pf Note ** Typical values at TA = 25°C 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 MOC8080 TIL113 TA = 0˚C, 25˚C TA = 70˚C TA = 100˚C TA = -55˚C 1 NORMALIZED TO: CTR @ IF = 10 mA TA = 25˚C VCE = 5 V 0.1 0.1 1 10 100 1 NORMALIZED TO: CTR @ IF = 10 mA TA = 25˚C VCE = 10 V 0.1 -80 NORMALIZED TO: IF = 1 mA VCE = 5 V IF = 10 mA 10 IF = 5 mA 6 4 IF = 2 mA 2 IF = 1 mA 0 0 1 2 3 4 5 6 7 8 -40 -20 0 20 40 60 80 100 120 Fig. 4 Dark Current vs. Ambient Temperature ICEO - COLLECTOR-EMITTER DARK CURRENT (nA) IC - COLLECTOR CURRENT (NORMALIZED) 16 8 -60 TA - AMBIENT TEMPERATURE (˚C) Fig. 3 Collector Current vs. Collector-Emitter Voltage 12 H11B3 10 IF - LED INPUT CURRENT (mA) 14 H11B255 Fig. 2 Current Transfer Ratio vs. Ambient Temperature CTR - CURRENT TRANSFER RATIO (NORMALIZED) CTR - CURRENT TRANSFER RATIO (NORMALIZED) Fig. 1 Output Current vs. Input Current H11B2 9 10000 VCE = 10 V 1000 100 10 1 0.1 0.01 10 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (˚C) VCE- COLLECTOR -EMITTER VOLTAGE (V) Fig. 5 Turn-On Time vs. Input Current Fig. 6 Turn-Off Time vs. Input Current 1000 1000 RL = 1 k1 VCC = 10 V 100 10 TOFF - TIME (µs) TON - TIME (µs) RL = 100 1 RL = 10 1 RL = 1 k1 100 RL = 100 1 10 RL = 10 1 1 VCC = 10 V 1 0.1 0.1 1 10 IF - LED INPUT CURRENT (mA) 100 0.1 1 10 100 IF - LED INPUT CURRENT (mA) 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 MOC8080 TIL113 H11B2 H11B255 H11B3 TYPICAL ELECTRO-OPTICAL CHARACTERISTIC CURVES (25°C Free air temperature unless otherwise specified) (Cont.) INPUT VCC RL RIN PULSE OUTPUT INPUT 5V OUTPUT 10% 1.5 V 90% t on t off IF Test Circuit (All devices except CNX48U) Switching Waveforms (All devices except CNX48U) Fig. 7 Switching Time Test Circuit and Waveforms (All devices except CNX48U) VCC INPUT INPUT 90% R BE 501 10% OUTPUT RE Test Circuit (CNX48U only) t on t off Switching Waveforms (CNX48U only) Fig. 8 Switching Time Test Circuit and Waveforms (CNX48U only) Notes 1. The current transfer ratio(IC/IF) is the ratio of the detector collector current to the LED input current with VCE @ 10 V. 2. For this test, LED pins 1 and 2 are common and phototransistor pins 4,5 and 6 are common. 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 MOC8080 TIL113 Package Dimensions (Through Hole) H11B2 H11B255 H11B3 Package Dimensions (Surface Mount) PIN 1 ID. 0.350 (8.89) 0.330 (8.38) 3 2 PIN 1 ID. 1 0.270 (6.86) 0.240 (6.10) SEATING PLANE 0.270 (6.86) 0.240 (6.10) 0.350 (8.89) 0.330 (8.38) 4 5 0.070 (1.78) 0.045 (1.14) 6 0.300 (7.62) TYP 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.115 (2.92) 0.200 (5.08) 0.165 (4.18) 0.016 (0.41) 0.008 (0.20) 0.020 (0.51) MIN 0.154 (3.90) 0.100 (2.54) 0.016 (0.40) 0.008 (0.20) 0.022 (0.56) 0.016 (0.41) 0° to 15° 0.020 (0.51) MIN 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.300 (7.62) TYP 0.100 (2.54) TYP 0.016 (0.40) MIN 0.315 (8.00) MIN 0.405 (10.30) MAX Lead Coplanarity : 0.004 (0.10) MAX Package Dimensions (0.4”Lead Spacing) Recommended Pad Layout for Surface Mount Leadform 0.270 (6.86) 0.240 (6.10) 0.070 (1.78) 0.060 (1.52) SEATING PLANE 0.350 (8.89) 0.330 (8.38) 0.415 (10.54) 0.070 (1.78) 0.045 (1.14) 0.100 (2.54) 0.295 (7.49) 0.030 (0.76) 0.200 (5.08) 0.115 (2.92) 0.154 (3.90) 0.100 (2.54) 0.004 (0.10) MIN 0.016 (0.40) 0.008 (0.20) 0° to 15° 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.400 (10.16) TYP NOTE All dimensions are in inches (millimeters) Call QT Optoelectronics for more information or the phone number of your nearest distributor. United States 800-533-6786 • France 33 [0] 1.45.18.78.78 • Germany 49 [0] 89/96.30.51 • United Kingdom 44 [0] 1296 394499 • Asia/Pacific 603-7248193 www.qtopto.com 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 MOC8080 TIL113 H11B2 H11B255 H11B3 ORDERING INFORMATION Order Entry Identifier Option S .S Description Surface Mount Lead Bend SD .SD Surface Mount; Tape and reel W .W 0.4” Lead Spacing 300 .300 VDE 0884 300W .300W VDE 0884, 0.4” Lead Spacing 3S .3S VDE 0884, Surface Mount 3SD .3SD VDE 0884, Surface Mount, Tape & Reel QT Carrier Tape Specifications (“D” Taping Orientation) 12.0 ± 0.1 4.85 ± 0.20 4.0 ± 0.1 0.30 ± 0.05 4.0 ± 0.1 Ø1.55 ± 0.05 1.75 ± 0.10 7.5 ± 0.1 16.0 ± 0.3 13.2 ± 0.2 9.55 ± 0.20 0.1 MAX 10.30 ± 0.20 Ø1.6 ± 0.1 User Direction of Feed NOTE All dimensions are millimeters Call QT Optoelectronics for more information or the phone number of your nearest distributor. United States 800-533-6786 • France 33 [0] 1.45.18.78.78 • Germany 49 [0] 89/96.30.51 • United Kingdom 44 [0] 1296 394499 • Asia/Pacific 603-7248193 www.qtopto.com 6/1/00 200042A