1N5400G RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION 1N5408G GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 3.0 Amperes FEATURES * * * * * High reliability Low leakage Low forward voltage drop High current capability Glass passivated junction DO-201AD MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 1.18 grams 1.0 (25.4) MIN. .052 (1.3) DIA. .048 (1.2) .375 (9.5) .335 (8.5) .220 (5.6) .197 (5.0) DIA. 1.0 (25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS SYMBOL 1N5400G 1N5401G 1N5402G 1N5404G 1N5406G 1N5407G 1N5408G UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375” (9.5mm) lead length at T L = 105oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note) Typical Thermal Resistance Operating and Storage Temperature Range Volts IO 3.0 Amps I FSM 200 Amps CJ 40 R θJA T J , T STG 30 -65 to + 175 pF 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 3.0A DC Maximum DC Reverse Current @T A = 25 oC at Rated DC Blocking Voltage @T A = 100 oC Maximum Full Load Reverse Current Average, Full Cycle o .375” (9.5mm) lead length at TL = 75 C NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts SYMBOL VF IR 1N5400G 1N5401G 1N5402G 1N5404G 1N5406G 1N5407G 1N5408G UNITS 1.1 Volts 5.0 uAmps 300 30 uAmps 2001-6 FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 4 3 2 Single Phase Half Wave 60Hz Resistive or Inductive Load 1 0 25 FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 300 8.3ms Single Half Sine-Wave (JEDED Method) 250 200 150 100 0 1 20 10 4 2 1.0 .4 .2 .1 2 4 6 8 10 20 40 60 80100 NUMBER OF CYCLES AT 60Hz TJ = 25 Pulse Width=300us 1% Duty Cycle .04 .02 .01 50 75 100 125 150 175 LEAD TEMPERATURE, ( ) .6 INSTANTANEOUS REVERSE CURRENT, (uA) 0 PEAK FORWARD SURGE CURRENT, (A) FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) 5 .8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 4 1.0 .4 TJ = 25 .1 .04 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( 1N5400G THRU 1N5408G ) 200 100 60 40 20 10 6 4 TJ = 25 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, ( V ) RECTRON