RECTRON HFM301 SEMICONDUCTOR THRU TECHNICAL SPECIFICATION HFM308 SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 3.0 Amperes FEATURES * * * * * * Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.24 gram DO-214AB MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) RATINGS SYMBOL HFM301 HFM302 HFM303 HFM304 HFM305 HFM306 HFM307 HFM308 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 300 400 600 800 1000 Volts Maximum RMS Volts VRMS 35 70 140 210 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 300 400 600 800 1000 Volts Maximum Average Forward Current at TA = 50oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range IO 3.0 Amps IFSM 200 150 Amps CJ 70 50 pF TJ, TSTG 0 -65 to + 175 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage at 3.0A DC SYMBOL VF Maximum Full Load Reverse Current, Full cycle Average TA = 55oC Maximum DC Reverse Current at @TA = 25oC Rated DC Blocking Voltage @TA = 125oC IR Maximum Reverse Recovery Time (Note 1) trr NOTES : 1. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A. 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts. HFM301 HFM302 HFM303 HFM304 HFM305 HFM306 HFM307 HFM308 1.0 1.3 50 1.7 UNITS Volts 50 uAmps 10 150 uAmps uAmps 75 nSec 1998-8 Back RECTRON