SF301C RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION SF306C GLASS PASSIVATED SUPER FAST RECTIFIER VOLTAGE RANGE 50 to 400 Volts CURRENT 30 Amperes FEATURES * * * * * * * Low switching noise Low forward voltage drop Low thermal resistance High current capability Super fast switching speed High reliability Good for switching mode circuit TO-247 * * * * * .645 (16.0) .625 (15.9) .085 (2.16) .075 (1.90) .245 (6.2) .225 (5.7) MECHANICAL DATA Case: TO-247 molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 5.60 grams .203 (5.16) .193 (4.90) .135 (3.4) .115 (2.9) .093 (2.30) .076 (1.97) .840 (21.3) .820 (20.8) .086 (2.18) .076 (1.93) .095 (2.4) .085 (2.1) .160 (4.1) .140 (3.5) .127 (3.22) .117 (2.97) .030 (.76) .020 (.51) .795 (20.2) .775 (19.7) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. .225 (5.7) .205 (5.2) .048 (1.22) .044 (1.12) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SF301C SF302C SF303C SF304C SF305C SF306C Maximum Recurrent Peak Reverse Voltage SYMBOL VRRM 50 100 150 200 300 400 Volts Maximum RMS Voltage VRMS 35 70 105 140 210 280 Volts VDC 50 100 150 200 300 400 RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TC = 100 oC UNITS Volts IO 30.0 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 300 Amps Typical Thermal Resistance RθJC 3 Operating and Storage Temperature Range 0 120 CJ Typical Junction Capacitance (Note 2) 100 -65 to + 150 T J , T STG C/ W pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 15.0A DC @T C = 25 o C Maximum DC Reverse Current at Rated DC Blocking Voltage @T C = 100 oC Maximum Reverse Recovery Time (Note 1) NOTES : 1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. Suffix “A” =Common Anode. VF SF301C SF302C SF304C SF305C UNITS Volts uAmps 500 35 SF306C 1.35 10 IR trr SF303C 1.0 50 nSec 2001-5 RATING AND CHARACTERISTIC CURVES ( SF301C THRU SF306C ) FIG. 2 - TYPICAL REVERSE CHARACTERISTICS 1000 30 24 12 Single Phase Half Wave 60Hz Inductive or Resistive Load 6.0 0 0 50 100 CASE TEMPERATURE, ( 150 ) FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 300 8.3ms Single Half Sine-Wave (JEDED Method) 250 INSTANTANEOUS REVERSE CURRENT, (uA) PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 36 200 TC = 100 100 10 TC = 25 1.0 0.1 0 150 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 100 50 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 80 40 4C 20 10 4 0 F3 S C~ 01 3 SF 6C 0 F3 ~S 5C 0 F3 S 1.0 .4 .1 .5 TJ = 25 Pulse Width=300us 1% Duty Cycle .6 .7 .8 .9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, (V) JUNCTION CAPACITANCE, (pF) FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) 20 175 150 125 SF 30 1C ~S 100 F3 SF 04 30 ~S F3 50 TJ = 25 C 5C 06 C 25 0 .1 .5 1.0 2 5 10 20 50 100 200 REVERSE VOLTAGE, ( V ) RECTRON