SF1124A • • • • • Designed for WCDMA 3G IF Applications Excellent Size-to-Performance Ratio Balanced or Unbalanced Input and Output Hermetic 13.3 x 6.5 mm Surface-mount Case Complies with Directive 2002/95/EC (RoHS) 190 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals 30 VDC -40 to +85 °C Storage Temperature Range Suitable for lead-free soldering - Max. Soldering Profile 260°C for 30 s SMP-53 Electrical Characteristics Characteristic Nominal Center Frequency Passband Sym fC Insertion Loss at fc Notes 1 Min Typ 190.000 Max Units MHz 12 14.0 dB 4.6 5.1 5.1 5.7 IL 1 db Passband BW1 3 db Passband BW3 Amplitude Ripple over fc±2.4 MHz 1, 2 .70 Phase Linearity over fc±2.4 MHz Group Delay Variation over fc ±fc2.4 MHz Rejection GDV fc-4.1 to fc-3.65 and fc+3.4 to fc+3.8 MHz 10 fc-5.0 to fc-4.1 and fc+3.8 to fc+5.0 MHz 30 fc-10.0 to fc-5.0 and fc+5.0 to fc+10.0 MHz 40 fc-20.0 to fc-10.0 and fc+10.0 to fc+20.0 MHz 1, 2, 3 At 157.6 MHz MHz 4 10 °P-P 75 120 nsP-P 40 dB 40 At 165.7 MHz 40 fc-60 MHz to fc-20 MHz 40 fc+20 MHz to fc+60 MHz 40 Part to Part Average Group Delay Variation Operating Temperature Range Frequency Temperature Coefficient TA FTC nsec °C ppm/°C External L-C SMP-53 13.3 x 6.5 mm Nominal Footprint Lid Symbolization (YY = year, WW = week) Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. Electrostatic Sensitive Device. Observe precautions for handling. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. ±5 +85 -18 Impedance Matching to 50Ω Unbalanced Case Style +25 -10 1 dBP-P 1.0 RFM SF1124A YYWW Electrical Connections Connection Terminals Port 1 Hot 11 Port 1 Gnd Return 12 Port 2 Hot 5 Port 2 Gnd Return Case Ground E-mail: [email protected] http://www.rfm.com SF1124A-121504 6 All others Page 1 of 3 190.0 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF1124A-121504 Page 2 of 3 190.0 MHz SAW Filter SMP-53 Case 12-Terminal Ceramic Surface-Mount Case 13.3 x 6.5 mm Nominal Footprint Case Dimensions Dimension A B C D E H P Min 13.08 6.27 mm Nom 13.31 6.50 1.91 1.50 0.79 1.0 2.54 Max 13.60 6.80 2.00 Min 0.515 0.247 Inches Nom 0.524 0.256 0.075 0.059 0.031 0.039 0.100 Max 0.535 0.268 0.079 Electrical Connections Materials Connection Solder Pad Termination Au plating 30 - 60 uInches (76.2-152 uM) over 80200 uInches (203-508 uM) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 uInches Thick Body Al2O3 Ceramic Port 1 Port 2 Terminals Input or Return 11 Return or Input 12 Output or Return 5 Return or Output Pb Free 6 Ground All others Single Ended Operation Return is ground Differential Operation B 12 Return is hot C D H 11 11 12 1 10 2 9 9 2 3 8 8 3 4 7 7 4 1 10 P (8 Places) A 5 6 TOP VIEW RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. 6 E (10 Places) 5 BOTTOM VIEW E-mail: [email protected] http://www.rfm.com SF1124A-121504 Page 3 of 3