TI TPS3809L30DBV

TPS3809J25, TPS3809L30, TPS3809K33, TPS3809I50
3-PIN SUPPLY VOLTAGE SUPERVISORS
SLVS228 – AUGUST 1999
D
D
D
D
D
D
TPS3809 . . . DBV PACKAGE
(TOP VIEW)
3-Pin SOT-23 Package
Supply Current of 9 µA (Typical)
Precision Supply Voltage Monitor
2.5 V, 3 V, 3.3 V, 5 V
Power-On Reset Generator With Fixed
Delay Time of 200 ms
Pin-For-Pin Compatible With MAX 809
Temperature Range . . . –40°C to 85°C
GND
1
3
RESET
VDD
2
description
The TPS3809 family of supervisory circuits provides circuit initialization and timing supervision, primarily for
DSPs and processor-based systems.
During power-on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the
supervisory circuit monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage
VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset.
The delay time, td(typ) = 200 ms, starts after VDD has risen above the threshold voltage VIT. When the supply
voltage drops below the threshold voltage VIT, the output becomes active (low) again. No external components
are required. All the devices of this family have a fixed sense-threshold voltage VIT set by an internal voltage
divider.
The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. The circuits are available
in a 3-pin SOT-23. The TPS3809 devices are characterized for operation over a temperature range of –40°C
to 85°C.
typical applications
TPS76333
D
3.3 V
5V
IN
OUT
GND
VDD
VDD
TMS320LC54x
TPS3809K33
RESET
RESET
GND
GND
D
D
D
D
D
D
D
Applications Using DSPs, Microcontrollers,
or Microprocessors
Wireless Communication Systems
Portable/Battery-Powered Equipment
Programmable Controls
Intelligent Instruments
Industrial Equipment
Notebook/Desktop Computers
Automotive Systems
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
TPS3809J25, TPS3809L30, TPS3809K33, TPS3809I50
3-PIN SUPPLY VOLTAGE SUPERVISORS
SLVS228 – AUGUST 1999
AVAILABLE OPTIONS
TA
–40°C
40°C to 85°C
DEVICE NAME
TPS3809J25DBVR†
TPS3809J25DBVT‡
†
TPS3809L30DBVR
TPS3809L30DBVT‡
TPS3809K33DBVR†
TPS3809I50DBVR†
THRESHOLD VOLTAGE
MARKING
2.25 V
PCZI
2.64 V
PDAI
TPS3809K33DBVT‡
TPS3809I50DBVT‡
2.93 V
PDBI
4.55 V
PDCI
† The DBVR passive indicates tape and reel of 3000 parts.
‡ The DBVT passive indicates tape and reel of 250 parts.
ORDERING INFORMATION
FUNCTION/TRUTH TABLE, TPS3809
VDD>VIT
TPS380
RESET
0
L
1
H
9
J
25 DBV R
Reel
Package
Nominal Supply Voltage
Nominal Threshold Voltage
Functionality
Family
functional block diagram
TPS3809
R1
_
VDD
+
Reset
Logic
+
Timer
R2
GND
Oscillator
Reference
Voltage
of 1.137 V
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
RESET
TPS3809J25, TPS3809L30, TPS3809K33, TPS3809I50
3-PIN SUPPLY VOLTAGE SUPERVISORS
SLVS228 – AUGUST 1999
timing diagram
VDD
V(NOM)
VIT
1.1 V
t
RESET
1
0
ÎÎ
ÎÎ
ÎÎ
ÎÎ
ÎÎ
td
ÎÎ
ÎÎ
ÎÎ
ÎÎ
ÎÎ
td
t
For VDD< 1.1 V Undefined
Behavior of RESET Output
absolute maximum ratings over operating free-air temperature (unless otherwise noted)†
Supply voltage, VDD (see Note1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
All other pins (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to 7 V
Maximum low output current, IOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 mA
Maximum high output current, IOH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –5 mA
Input clamp current, IIK (VI<0 or VI>VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Output clamp current, IOK (VO<0 or VO>VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 85°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
Soldering temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.
NOTE 1: All voltage values are with respect to GND. For reliable operation the device should not be operated at 7 V for more than t=1000h
continuously.
DISSIPATION RATING TABLE
PACKAGE
TA <25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
DBV
437 mW
3.5 mW/°C
280 mW
227 mW
recommended operating conditions at specified temperature range
MIN
Supply voltage, VDD
Operating free-air temperature range, TA
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MAX
UNIT
2
6
V
–40
85
°C
3
TPS3809J25, TPS3809L30, TPS3809K33, TPS3809I50
3-PIN SUPPLY VOLTAGE SUPERVISORS
SLVS228 – AUGUST 1999
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
VOH
VOL
VIT
IT–
TEST CONDITIONS
VDD = 2.5 V to 6 V, IOH = –500 µA
VDD = 3.3 V,
IOH = –2 mA
VDD = 6 V,
IOH = –4 mA
High-level output voltage
Low-level output voltage
VDD = 2 V to 6 V,
VDD = 3.3 V,
Power-up reset voltage (see Note 2)
VDD = 6 V,
VDD ≥ 1.1 V,
Negative-going
g
g g input threshold
voltage (see Note 3)
MIN
Hysteresis
IDD
Supply current
Ci
Input capacitance
MAX
V
IOL = 500 µA
0.2
IOL = 2 mA
IOL = 4 mA
IOL = 50 µA
0.4
0.2
TPS3809J25
2.20
2.25
2.30
2.58
2.64
2.70
2.87
2.93
2.99
4.45
4.55
4.65
TA– 40°C to 85°C
V
0.4
TPS3809L30
TPS3809K33
UNIT
VDD –0.4
TPS3809I50
Vh
hys
TYP
VDD –0.2
VDD –0.4
TPS3809J25
30
TPS3809L30
35
TPS3809K33
40
TPS3809I50
60
VDD = 2 V, Output unconnected
VDD = 6 V, Output unconnected
V
V
mV
9
12
20
25
µA
VI = 0 V to VDD
5
pF
NOTES: 2. The lowest supply voltage at which RESET becomes active. tr, VDD ≥ 15 µs/V.
3. To ensure best stability of the threshold voltage, a bypass capacitor ( 0.1 µF ceramic) should be placed near the supply terminals.
timing requirements at RL = 1 MΩ, CL = 50 pF, TA = 25°C
PARAMETER
tw
Pulse width
TEST CONDITIONS
at VDD
VDD = VIT– + 0.2 V,
MIN
VDD = VIT– – 0.2 V
TYP
MAX
UNIT
µs
3
switching characteristics at RL = 1 MΩ, CL = 50 pF, TA = 25°C
PARAMETER
td
Delay time
tPHL
Propagation (delay) time, high-to-low-level output
4
VDD to RESET delay
POST OFFICE BOX 655303
TEST CONDITIONS
MIN
TYP
MAX
UNIT
VDD ≥ VIT– + 0.2 V,
See timing diagram
120
200
280
ms
VIL = VIT– – 0.2 V,
VIH = VIT– +0.2 V
• DALLAS, TEXAS 75265
1
µs
TPS3809J25, TPS3809L30, TPS3809K33, TPS3809I50
3-PIN SUPPLY VOLTAGE SUPERVISORS
SLVS228 – AUGUST 1999
TYPICAL CHARACTERISTICS
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
2.75
50
TA = 25°C
2.50
40
2.25
30
2.00
TA = 25°C
1.75
1.50
TA = 85°C
1.25
TA = 0°C
1.00
0.75
TA =–40°C
0.50
I DD – Supply Current – µ A
VOL – Low-Level Output Voltage – V
VDD = 2.5 V
20
10
TPS3809J25
0
–10
–20
–30
–40
0.25
0
–50
0
2.5
5.0
7.5
10.0
12.5
–2
IOL – Low-Level Output Current – mA
Figure 1
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
6.5
5.5
5.0
TA =–40°C
4.0
3.5
TA = 0°C
3.0
2.5
TA = 85°C
2.0
1.5
1.0
VDD = 2.5 V
2.75
TA = 25°C
VOH – High-Level Output Voltage – V
VOH – High-Level Output Voltage – V
3.00
VDD = 6 V
4.5
6
Figure 2
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
6.0
0
2
4
VDD – Supply Voltage – V
2.50
2.25
2.00
TA =–40°C
1.75
1.50
TA = 0°C
1.25
1.00
TA = 85°C
0.75
0.50
TA = 25°C
0.25
0.5
0
0
0
–10
–20
–30
–40
IOH – High-Level Output Current – mA
–50
0
Figure 3
–2
–4
–6
–8
IOH – High-Level Output Current – mA
–10
Figure 4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
TPS3809J25, TPS3809L30, TPS3809K33, TPS3809I50
3-PIN SUPPLY VOLTAGE SUPERVISORS
SLVS228 – AUGUST 1999
TYPICAL CHARACTERISTICS
MINIMUM PULSE DURATION AT VDD
vs
VDD THRESHOLD OVERDRIVE VOLTAGE
1.001
3.5
VDD = 2.3 V
t w – Minimum Pulse Duration at V DD – µs
Normalized Threshold Voltage V IT (T A ), V IT (25 ° C)
NORMALIZED INPUT THRESHOLD VOLTAGE
vs
FREE-AIR TEMPERATURE AT VDD
1.000
0.999
0.998
0.997
0.996
0.995
–40
3.0
2.5
2.0
1.5
1.0
0.5
0
–20
0
20
40
60
TA – Free-Air Temperature – °C
85
0
0.2
Figure 6
Figure 5
6
0.4
POST OFFICE BOX 655303
0.6
0.8
VDD – Threshold Overdrive Voltage – V
• DALLAS, TEXAS 75265
1.0
TPS3809J25, TPS3809L30, TPS3809K33, TPS3809I50
3-PIN SUPPLY VOLTAGE SUPERVISORS
SLVS228 – AUGUST 1999
MECHANICAL DATA
DBV (R-PDSO-G3)
PLASTIC SMALL-OUTLINE
0,95
0,50
0,30
0,20 M
3
1,70
1,50
0,15 NOM
3,00
2,60
2
1
Gage Plane
3,00
2,80
0,25
0°–8°
0,55
0,35
Seating Plane
1,45
0,95
0,05 MIN
0,10
4073253-2/E 05/99
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright  1999, Texas Instruments Incorporated