KBL005 thru KBL10 Vishay Semiconductors formerly General Semiconductor Single-Phase Bridge Rectifier Case Style KBL 0.755 (19.18) 0.745 (18.92) Features • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • This series is UL listed under the Recognized Component Index, file number E54214 • High case dielectric strength of 1500 VRMS • Ideal for printed circuit boards • High forward surge current capability • High surge current capability • High temperature soldering guaranteed: 260°C/10 seconds, 0.375 (9.5mm) lead length, 5lbs. (2.3kg) tension 0.630 (16.0) 0.620 (15.75) 1.0 (25.4) MIN. 1.1 (27.94) MIN. Reverse Voltage 50 and 1000 V Forward Current 4.0 A Mechanical Data Case: Molded plastic body Terminals: Plated leads solderable per MIL-STD-750, Method 2026 0.220 (5.59) 0.052 (1.32) 0.048 (1.22) DIA. 0.180 (4.57) Mounting Position: Any Weight: 0.2 oz., 5.6 g 0.255 (6.48) 0.245 (6.22) 0.085 (2.18) 0.081 (2.06) Packaging codes/options: 1/300 EA. per Bulk Tray Stack Dimensions in inches and (millimeters) Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. KBL Symbols 005 KBL 01 KBL 02 KBL 04 KBL 06 KBL 08 KBL 10 Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward output current at TA=50°C IF(AV) 4.0 A Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) TJ=150°C IFSM 200 A RΘJA RΘJL 19 2.4 °C/W -50 to +150 °C Typical thermal resistance per leg (NOTE 1) (NOTE 2) Operating junction storage and temperature range TJ, TSTG Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Maximum instantaneous forward drop per leg at 4.0 A VF 1.1 V Maximum DC reverse current at rated TA= 25°C DC blocking voltage per leg TA=125°C IR 5.0 1.0 µA mA Notes: (1) Thermal resistance from junction to ambient with units mounted on 3.0 x 3.0 x 0.11” thick (7.5 x 7.5 x 0.3cm) Al. plate (2) Thermal resistance from junction to lead with units mounted on P.C.B. at 0.375" (9.5mm) lead length and 0.5 x 0.5" (12 x 12mm) copper pads Document Number 88655 07-Oct-02 www.vishay.com 1 KBL005 thru KBL10 Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25°C unless otherwise noted) Fig. 1 – Derating Curve Output Rectified Current 200 Heatsink Mounted 3.0" sq. x 0.06" Thk (7.5 x 0.15cm) Copper Plate Peak Forward Surge Current (A) Average Forward Current (A) 4.0 3.0 2.0 P.C.B. Mounting 0.375" (9.5mm) Lead Length 60 HZ Resistive or Inductive Load 1.0 0 TJ = 150°C Single Sine-Wave (JEDEC Method) 175 150 125 100 75 50 1.0 Cycle 25 0 50 100 Number of Cycles at 60 HZ Fig. 3 – Typical Instantaneous Forward Characteristics Per Leg Fig. 4 – Typical Reverse Leakage Characteristics Per Leg 10 Instantaneous Reverse Current (µA) 1.0 TJ = 25°C Pulse Width = 300µs 1% Duty Cycle 1 0.1 0.6 100 10 1 150 Temperature (°C) 100 Instantaneous Forward Current (A) Fig. 2 – Maximum Non-Repetitive Peak Forward Surge Current Per Leg 0.7 0.9 0.8 1.1 1.0 1.3 1.2 Instantaneous Forward Voltage (V) TJ = 100°C 1 0.1 TJ = 25°C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 5 – Typical Junction Capacitance Per Leg Junction Capacitance, pF 250 TJ = 25°C f = 1.0MHZ Vsig = 50mVp-p 200 150 100 50 0 0.1 1 10 100 Reverse Voltage (V) www.vishay.com 2 Document Number 88655 07-Oct-02