DIODE(THREE PHASES BRIDGE TYPE) DF60AA120/160 UL;E76102 （M） Power Diode Module DF60AA is designed for three phase full wave rectification, which has six diodes connected in a three phase bridge configuration. The mounting base of the module is electrically isolated from semiconductor elements for simple heatsink construction Output DC current is 60Amp (Tc=112℃) Repetitive peak reverse voltage is up to 1,600V. 80 21.5 5-M5 40.0 6.5 ● TjMax=150℃ ● Isolated ● High 21.5 10.0 Mounting Base reliability by unique glass passivation − ＋ （Applications） AC. DC Motor Drive/AVR/Switching ―for three phase rectification 1.1 1∼ 2∼ 3∼ 11 11 1.1 35.0 25.0 3.2 67.0 60.0 ＋4 ■Maximum Ratings Symbol Unit：a −5 （Tj＝25℃ unless otherwise specified） Item Ratings DF60AA120 DF60AA160 Unit VRRM Repetitive Peak Reverse Voltage 1200 1600 V VRSM Non-Repetitive Peak Reverse Voltage 1300 1700 V Symbol Item Conditions Ratings Unit ID Output current（D.C.） Three phase. full wave. TC＝112℃ IFSM Surge Forward Current 1 cycle, 50/60HZ, peak value, non-repetitive 910/1000 A Tj Junction Temperature −40 to ＋150 ℃ Tstg Storage Temperature −40 to ＋125 ℃ VISO Isolation Breakdown Voltage（R.M.S.） Main Terminal to case 1minute 2500 V Mounting Torque 60 A Mounting（M6） Recommended Value 2.5-3.9（25-40） 4.7（48） Terminal（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） N･m （㎏f･B） 200 g Ratings Unit 12.0 mA Typical Value Mass ■Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. Tj＝150℃ at VRRM VFM Forward Voltage Drop, max. IFM＝60A, Tj＝25℃ Inst. measurement 1.3 V Junction to case 0.24 ℃/W Rth（j-c） Thermal Impedance, max. SanRex Conditions ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] DF60AA120/160 Forward Voltage Drop max. １６０ Power Dissipation Pav（W） Forward Current I（A） F ２００ Output Current vs.Power Dissipation, max.（Three phase, full wave） １４０ １００ １２０ ５０ １００ ２０ Tj＝25℃ １０ ５ ２ １ ０． ５ １ １． ５ ８０ ６０ ４０ ２０ ０ ２ １０ Output Current vs. Allowable case Temp １０００ １４０ ４０ Three Phase １２０ ６０ Per one element Tj＝25℃ start ６００ １１０ 60Hz 50Hz ４００ １００ ９０ ２００ ０ １０ ２０ ３０ ４０ ５０ ６０ ７０ ０ １００ ２ ５ １０１ ２ ５ １０２ Time（Cycles） Output Current ID（A） ０． ３ ５０ Cycle Surge Forward Current Rating （Non-Repetitive） ８００ １３０ Transient Thermal Impedance θj-c（℃/W） ３０ Surge Forward Current I（A） F Allowable Case Temperature Tc（℃） １５０ ２０ Output Current ID（A） Forward Voltage Drop V（V） F Transient Thermal Impedance（max） Junction to Case ０． ２５ ０． ２ ０． １５ ０． １ ０． ０５ ０ ５ １０-１ SanRex ２ ５ １００ ２ Time t（sec） ５ １０１ ２ ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]