DIODE MODULE DWF(R)40A30/40 DWF （R） 40A is a non-isolated diode module designed for 3 phase rectification. ● IF （AV） ＝40A, VRRM＝400V Construction with Joint-Cathode（F） Type and Joint-Anode （R） type. ● Non-isolated.（Mounting Base as terminals.） ● High Surge Capability ● Easy 20 92 20 20 25 12.5 12 2- 6 （Applications） Welding Power Supply 3 Phase Rectifier DWF 6.5 31max 19.5 4.0 M5X10 80±0.2 DWR Unit：a ■Maximum Ratings Symbol （Tj＝25℃ unless otherwise specified） Item Ratings DWF(R)40A30 DWF(R)40A40 Unit VRRM Repetitive Peak Reverse Voltage 300 400 V VRSM Non-Repetitive Peak Reverse Voltage 360 480 V D.C. Reverse Voltage 240 320 V VR（DC） Symbol Item Conditions Average Forward Current Single phase, half wave, 180。conduction, Tc：122℃ IF（RMS） R.M.S. Forward Current Single phase, half wave, 180。conduction, Tc：122℃ IFSM Surge Forward Current 1 ／2cycle,60Hz, It It Value for one cycle of surge current Tj IF（AV） 2 Tstg Ratings Unit 40 A 62 A 800 A 2700 A2S Operating Junction Temperature −30 to ＋150 ℃ Storage Temperature −30 to ＋125 ℃ 2 Mounting Torque peak value, non-repetitive Mounting（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） Terminal（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） N･m （㎏f･B） 170 g Ratings Unit Mass ■Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. at VDRM, single phase, half wave, Tj＝150℃ 8 mA VFM Forward Voltage Drop, max. Forward current 120A, Tj＝25℃, Inst. measurement 1.15 V Junction to case 0.60 ℃/W Rth（j-c） Thermal Impedance, max. SanRex Conditions ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] DWF(R)40A30/40 ６０ Power Dissipation Pav（W） Forward Current I（A） F １０３ Maximum Forward Characteristics ５ ２ １０２ ５ ２ １０１ Average Forward Current vs. Power Dissipation ５０ Single Phase Three Phase ４０ Six Phase ３０ ２０ １０ Per one element １５０ １． ５ ２． ０ １０ ２０ ３０ ５０ ６０ Average Forward Current（A） Average Forward Current vs. Allowable Case Temperature Cycle Surge Forward Current Rating （Non-Repetitive） １２５ １０００ Per one element Tj＝25℃ start Three Phase Six Phase １００ ０ ２０ １０ Single Phase ５００ ３０ ４０ ５０ ６０ ０ １ 60Hz ２ ５ １０ ２０ ５０ １００ Time（Cycles） Average Forward Current（A） Transient Thermal Impedance θj-c（℃/W） ４０ Forward Voltage Drop V（V） F Surge Forward Current I（A） F Allowable Case Temperature Tc（℃） １． ０ ０ ０ Transient Thermal Impedance（max） ０． ６ 50ms∼20sec Junction to Case Per one element ０． ５ ０． ４ ０． ３ 0.5ms∼200ms ０． ２ ０． １ ０ ５ ５ １０−1 ２ １０−３ ２ ５ ５ １００ ２ １０−２ ２ ５ １０１ ５ １０−１ ２ ２ Time t（sec） SanRex ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]