New Product LM12S49 Color STN-LCD Module (FA/POS/Measuring instruments) Features ■ 31 cm [12.1"] SVGA format ■ High brightness (180 cd/m2) ■ Built-in long life CCFT backlight (40 000 h, [Typ.]) Specifications Parameter Display size Dot format (H x V) Dot pitch (H x V) Active area (H x V) Panel type Panel mode Contrast ratio Response time Brightness 31 [12.1] 800 x RGB x 600 0.1025 x 0.3075 246.0 x 184.5 *1 Transmissive 40 : 1 300 180 Unit Parameter Unit cm [ "] dot mm mm ms cd/m2 Backlight type 2CCFT(E) Duty ratio 1/300 Logic voltage 5.0 Vcon Power consumption 7 030 Outline dimensions (W x H x D) 275.0 x 202.5 x 8.5 Weight 550 Operating temperature 0 to +40 Storage temperature -25 to +60 V mW mm g °C °C *1...Triple Super Twisted Nematic Outline Dimensions 2 5.75 2-3.4 5 138.2 50 131.8 A' BM area 2.2 1.8 min 2.2 4.0 MIN 76.5 A 3 2 1 3.5MIN 3 5 8 BM area 1 min 2.2 Active Area 245.98 x 184.48 Effective Viewing Area (Outline of Polarizer) Bezel Opening Area 250.6 x 189.1 268.5 269.5 BM area 1min 2.2 4.0 MIN Center Line (Bezel Opening Area) 0.02 0.0825 0.1025 Pitch 8.5 MAX 5.0 2.5 1.5 4.0 MIN 4.0 MIN(4PL) Free space area for screw boss In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Specifications are subject to change without notice for improvement. 3.5MIN 1 2 3 4.0 MIN R GB R GB 5 7.5 R GB 153 42MAX 3.9 4.0 MIN 40 41 5.3 min 1 0.3075 Pitch 0.2875 0.02 35.9 2 BM area 1 2.2 95.5 275 270 4.0 MIN 202.5 191 4.0 MIN (4PL) Free space area for screw boss unit : mm