BYW80F/FP-200 ® HIGH EFFICIENCY FAST RECOVERY RECTIFIER DIODES MAIN PRODUCTS CHARACTERISTICS IF(AV) 20 A VRRM 200 V Tj (max) 150°C VF (max) 0.85 V trr (max) 35 ns K TO-220AC BYW80-200 FEATURES Suited for SMPS Very low forward losses Negligible switching losses High surge current capability Insulated packages: ISOWATT220AC / TO-220FPAC: Insulation voltage = 2000 V DC Capacitance = 12 pF A K A ISOWATT220AC BYW80F-200 ■ ■ ■ ■ ■ A K DESCRIPTION Single chip rectifier suited for Switch Mode Power Supplies and high frequency DC to DC converters. Packaged in TO-220AC, ISOWATT220AC and TO-220FPAC this device is intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. TO-220FPAC BYW80FP-200 ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 200 V IF(RMS) RMS forward current 20 A 10 A IF(AV) Average forward current δ = 0.5 TO-220AC ISOWATT220AC Tc=95°C TO-220FPAC IFSM Surge non repetitive forward current Tstg Storage and junction temperature range Tj Maximum operating temperature range January 2002 - Ed: 3G Tc=120°C tp=10ms sinusoidal 10 100 - 65 to + 150 + 150 A °C °C 1/7 BYW80F/FP-200 THERMAL RESISTANCE Symbol Rth (j-c) Parameter Junction to case Value Unit TO-220AC 2.5 °C/W ISOWATT220AC / TO-220FPAC 4.7 ELECTRICAL CHARACTERISTICS STATIC CHARACTERISTICS Symbol IR * Test Conditions Tj = 25°C Min. Typ. VR = VRRM Tj = 100°C VF ** Max. Unit 10 µA 1 mA V Tj = 125°C IF = 7 A 0.85 Tj = 125°C IF = 15 A 1.05 Tj = 25°C IF = 15 A 1.15 Pulse test : * tp = 5 ms, duty cycle < 2 % ** tp = 380 µs, duty cycle < 2 % To evaluate the conduction losses use the following equation : P = 0.65 x IF(AV) + 0.027 x IF2(RMS) RECOVERY CHARACTERISTICS Symbol trr Test Conditions Tj = 25°C Min. Typ. Max. Unit ns IF = 0.5A IR = 1A Irr = 0.25A 25 IF = 1A VR = 30V dIF/dt = -50A/µs 35 tfr Tj = 25°C IF = 1A VFR = 1.1 x VF tr = 10 ns 15 ns VFP Tj = 25°C IF = 1A tr = 10 ns 2 V 2/7 BYW80F/FP-200 Fig. 1: Average forward power dissipation versus average forward current 14 P F(av)(W) Fig. 2: Peak current versus form factor 200 =0.5 =0.2 =0.1 12 =1 IM(A) T 175 =0.05 150 10 I P=10W 125 8 M =tp/T tp 100 6 T P=5W 75 4 50 2 I F(av)(A) 0 0 1 2 3 4 5 6 7 =tp/T 8 tp 9 10 11 12 13 14 Fig. 3: Forward voltage drop versus forward current (maximum values) 0 0 1 K 1.8 1.6 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Fig. 4: Relative variation of thermal impedance junction to case versus pulse duration (TO-220AC) 1.0 VFM(V) P=15W 25 Zth(j-c) (tp. K = Rth(j-c) ) Tj=125 oC 1.4 =0.5 0.5 1.2 =0.2 1.0 =0.1 0.8 T 0.6 0.2 Single pulse 0.4 0.2 IFM(A) 0.0 0.1 1 10 100 Fig. 5: Relative variation of thermal impedance junction to case versus pulse duration. (ISOWATT220AC / TO-220FPAC) 1 =tp/T tp(s) 0.1 1.0E-03 1.0E-02 1.0E-01 tp 1.0E+00 Fig. 6: Non repetitive surge peak forward current versus overload duration (TO-220AC) K Zth(j-c) (tp. K = Rth(j-c) IM(A) ) 100 90 0.8 80 =0.5 70 0.6 Tc=25 o C 60 50 =0.2 0.4 0.2 30 IM 20 Single pulse =0.1 10 0 1.0E-03 tp(s) 1.0E-02 Tc=75 o C 40 T 1.0E-01 =tp/T 1.0E+00 tp 1.0E+01 0 0.001 Tc=120 o C t =0.5 t(s) 0.01 0.1 1 3/7 BYW80F/FP-200 Fig. 7: Non repetitive surge peak forward current versus overload duration (ISOWATT220AC / TO-220FPAC) 80 IM(A) 12 Rth(j-a)=Rth(j-c) 10 9 60 8 50 Rth(j-a)=15 o C/W 7 Tc=25 o C 40 6 =0.5 5 30 Tc=50 oC IM 0 0.001 T 4 3 t =0.5 10 0.01 Tc=95 o C 2 t(s) 0.1 1 10 Fig. 9: Average current versus ambient temperature (duty cycle: 0.5) (ISOWATT220AC / TO-220FPAC) I F(av)(A) 12 11 Rth(j-a)=Rth(j-c) 10 9 8 Rth(j-a)=15 o C/W 7 6 =0.5 5 T 4 3 2 1 =tp/T tp Tamb( o C) 0 0 20 40 60 80 100 120 140 =tp/T 0 0 20 Tamb( o C) tp 40 60 80 100 120 140 160 Fig. 10: Junction capacitance versus reverse voltage applied (Typical values) VR(V) 160 QRR(nC) 90% CONFIDENCE 1 C(pF) Fig. 11: Recovery charges versus dIF/dt. Fig. 12: Peak reverse current versus dIF/dt. I RM(A) Tj=125 o C dIF/dt(A/us) 4/7 I F(av)(A) 11 70 20 Fig. 8: Average current versus ambient temperature (duty cycle : 0.5) (TO-220AC) IF=IF(av) 90% CONFIDENCE Tj=125 o C dIF/dt(A/us) IF=IF(av) BYW80F/FP-200 Fig. 13: Dynamic parameters versus junction temperature O QRR;IRM[Tj]/QRR;IRM[Tj=125 C] IRM QRR Tj( o C) PACKAGE MECHANICAL DATA TO-220AC (JEDEC outline) DIMENSIONS REF. A H2 C L5 L7 ØI L6 L2 D L9 F1 M F E G Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 H2 10.00 10.40 0.393 0.409 L2 L4 Millimeters 16.40 typ. 0.645 typ. L4 13.00 14.00 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 M Diam. I 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 5/7 BYW80F/FP-200 PACKAGE MECHANICAL DATA ISOWATT220AC (JEDEC outline) A H DIMENSIONS B REF. Diam Min. L6 L7 L2 L3 F1 F Millimeters D E G A B D E F F1 G H L2 L3 L6 L7 Diam Max. 4.40 4.60 2.50 2.70 2.40 2.75 0.40 0.70 0.75 1.00 1.15 1.70 4.95 5.20 10.00 10.40 16.00 typ. 28.60 30.60 15.90 16.40 9.00 9.30 3.00 3.20 Inches Min. Max. 0.173 0.181 0.098 0.106 0.094 0.108 0.016 0.028 0.030 0.039 0.045 0.067 0.195 0.205 0.394 0.409 0.63 typ. 1.125 1.205 0.626 0.646 0.354 0.366 0.118 0.126 PACKAGE MECHANICAL DATA TO-220FPAC REF. DIMENSIONS Millimeters A H Min. B Dia L6 L2 L7 L3 L5 D F1 L4 F G1 G 6/7 E A B D E F F1 G G1 H L2 L3 L4 L5 L6 L7 Dia. Max. 4.4 4.6 2.5 2.7 2.5 2.75 0.45 0.70 0.75 1 1.15 1.70 4.95 5.20 2.4 2.7 10 10.4 16 Typ. 28.6 30.6 9.8 10.6 2.9 3.6 15.9 16.4 9.00 9.30 3.00 3.20 Inches Min. Max. 0.173 0.181 0.098 0.106 0.098 0.108 0.018 0.027 0.030 0.039 0.045 0.067 0.195 0.205 0.094 0.106 0.393 0.409 0.63 Typ. 1.126 1.205 0.386 0.417 0.114 0.142 0.626 0.646 0.354 0.366 0.118 0.126 BYW80F/FP-200 Type BYW80-200 BYW80F-200 BYW80FP-200 ■ ■ ■ ■ ■ ■ Marking Package Weight Base Qty Delivery mode BYW80-200 TO-220AC 2.3 g 50 Tube BYW80F-200 ISOWATT220AC 2g 50 Tube BYW80FP-200 TO-220FPAC 1.8 g 50 Tube Cooling method: by conduction (C) Recommended torque value (ISOWATT220AC, TO-220FPAC): 0.55 nm Maximum torque value (ISOWATT220AC, TO-220FPAC): 0.7 Nm Recommended torque value (TO-220AC): 0.8 Nm Maximum torque value (TO-220AC): 1.0 Nm Epoxy meets UL94, V0 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 7/7