DC/DC Converters TSM Series, 1 Watt RoHS compliant Features ◆ SMD Package (SOIC-14/18) ◆ Construction in Lead Frame Technology ◆ Isolated Single and Dual Output ◆ I/O-Isolation 1‘000 VDC ◆ High Efficiency ◆ Operating Temperature –40°C to +85°C ◆ Reflow Solder Temperature up to 245°C ◆ High Accuracy of Pin Co-Planarity ◆ Available in Tape and Reel Package ◆ Lead free Design, RoHS compliant ◆ 3 Year Product Warranty The TSM series are isolated DC/DC converters with 1W output power implemented in a molded plastic package with a pin accuracy suitable for automated SMDproduction. The devices can be soldered without any problems in a high temperature lead free solder process. With their small footprint these converters are the economical solution for point of load power conversion, ground loop elimination, noise reduction and digital interface applications. Models Ordercode Input voltage Output voltage Output current max. Efficiency typ. TSM 0505S 5 VDC 200 mA 80 % TSM 0509S 9 VDC 110 mA 78 % TSM 0512S 12 VDC 80 mA 80 % 15 VDC 65 mA 81 % TSM 0505D ± 5 VDC ±100 mA 75 % TSM 0512D ±12 VDC ± 40 mA 79 % TSM 0515D ±15 VDC ± 30 mA 79 % TSM 1205S 5 VDC 200 mA 81 % TSM 1209S 9 VDC 110 mA 78 % TSM 1212S 12 VDC 80 mA 81 % 15 VDC 65 mA 82 % TSM 0515S TSM 1215S 5 VDC ±10% 12 VDC ±10% TSM 1205D ± 5 VDC ±100 mA 75 % TSM 1212D ±12 VDC ± 40 mA 80 % TSM 1215D ±15 VDC ± 30 mA 80 % http://www.tracopower.com Page 1 of 5 DC/DC Converters TSM Series 1 Watt Input Specifications Input current no load /full load 5 Vin models: 30 mA / 260 mA typ. 12 Vin models: 15 mA / 110 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. Reverse voltage protection 0.3 A max. Reflected input ripple current can be reduced by ext. 1–2.2 µF polyester film capacitor Input filter internal capacitors Output Specifications Voltage set accuracy ±3% Voltage balance (dual output models) ± 1 % max. Regulation ± 1.2 % / 1 % change Vin ± 10 % max. – Input variation – Load variation 20 – 100 % Ripple and noise (20 MHz Bandwidth) 120 mVpk-pk max. Temperature coefficient ± 0.02 % / °C Short circuit protection limited 1 sec. max. Capacitive load 22 µF max. 10 µF max. – Single output models – Dual output models General Specifications Temperature ranges – Operating – Storage (see also enclosed derating curve) –40 °C ... +85 °C (no derating) –55 °C ... +125 °C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217E) >2’000’000 h @ 25 °C Isolation voltage – Input/Output 1‘000 VDC Isolation capacity – Input/Output 40 pF typ. Isolation resistance – Input/Output >1‘000 Mohm Switching frequency 100 kHz typ. (frequency modulation) Frequency change over line and load ± 30 % Physical Specifications Case material Package weight Reflow soldering profile epoxy molding compound (flammability to UL 94-V0) single output models: 1.2 g (0.04 oz) dual output models: 1.5 g (0.05 oz) peak temp. 245°C (10 sec max.) 217°C for 90 sec. max. Convection reflow solder process is recommended All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 5 DC/DC Converters TSM Series 1 Watt Derating all TSM Models +85˚C +105˚C 90 90 80 80 70 70 60 60 50 50 -5.0% /˚C 40 40 30 30 20 20 10 10 0 Output Power [%] 100 Output Power [%] 100 0 -40 -30 -20 -10 0 10 20 30 40 50 60 Ambient Temperature [˚C] 70 80 90 100 110 Outline Dimensions mm (inches) TSM Single Output Models 7.62 (0.3) (0.01±0.002) 0.25 ± 0.05 +0 (0.264 – 0.256) S Seating Plane 8 Pins ± 4˚ (0.01) 0 6.7 +–0.15 8 Pins 0.1 S 0.25 (0.185) 4.7 2.0 (0.079) 6.5 (0.256) 7.0 (0.276) 0.2 M S P 9.2 (0.362) 11.1 (0.437) 0.6 ±0.025 2.54 (0.1) (0.024 ±0.001) NA 8 1 7 14 NA +Vo 8 8.0 (0.315) 14 NA 2.5 (0.1) 12.7 (0.5) 1 7 –Vin +Vin NA –Vo NA = not available for electrical connection Tolerances: ± 0.25 mm (± 0.01) Specifications can be changed without notice http://www.tracopower.com Page 3 of 5 DC/DC Converters TSM Series 1 Watt Outline Dimensions mm (inches) TSM Dual Output Models 10.16 (0.4) (0.01±0.002) 0.25 ± 0.05 +0 (0.264 – 0.256) (0.01) 6.7 +0 –0.15 8 Pins 0.1 S 0.25 (0.185) 4.7 2.0 (0.079) 6.5 (0.256) S Seating Plane 8 Pins ± 4˚ 7.0 (0.276) 0.2 M S P 9.2 (0.362) 11.1 (0.437) 0.6 ±0.025 2.54 (0.1) (0.024 ±0.001) 10 1 9 NA 18 NA NA +Vo NA 10 8.0 (0.315) 18 2.5 (0.1) 15.24 (0.6) 1 9 –Vin +Vin NA Com –Vo NA = not available for electrical connection Tolerances: ± 0.25 mm (± 0.01) http://www.tracopower.com Page 4 of 5 DC/DC Converters TSM Series 1 Watt Solder Pad Dimensions mm (inches) TSM Single Output Models 7.62 (0.3) 2.54 2.54 (0.1) (0.1) (0.1) 1.7 1.0 Min. TSM Dual Output Models 10.16 (0.067) 10.8 (0.425) 2.54 (0.039 Min.) (0.4) 2.54 2.54 2.54 (0.1) (0.1) (0.1) (0.1) Specifications can be changed without notice 1.0 Min. (0.067) 1.7 10.8 (0.425) 2.54 (0.039 Min.) Rev. 07/05 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43311 4511 · Fax +41 43311 4545 · [email protected] · www.tracopower.com Page 5 of 5