ER302D THRU ER303D DPAK SURFACE MOUNT SUPERFAST RECTIFIER VOLTAGE - 200 to 300 Volts CURRENT - 3.0 Amperes FEATURES l For surface mounted applications l Low profile package l Built-in strain relief l Easy pick and place l Superfast recovery times for high efficiency l Plastic package has Underwriters Laboratory D PAK/TO-252AA Flammability Classification 94V-O l Glass passivated junction l High temperature soldering: 260 /10 seconds at terminals MECHANICAL DATA Case: D PAK/TO-252AA molded plastic Terminals: Solder plated, solderable per MIL-STD750, Method 2026 Polarity: Color bank denotes cathode Standard packaging: 16mm tape (EIA-481) Weight: 0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Resistive or inductive load. SYMBOLS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, at TC=75 Peak Forward Surge Current 8.3ms single half sineWave superimposed on rated load(JEDEC method) Maximum Instantaneous Forward Voltage at 3.0A (Note 1) Maximum DC Reverse Current TA=25 At Rated DC Blocking Voltage TA=100 Maximum Thermal Resistance (Note 2) Maximum Reverse Recovery Storage Temperature Range VRRM VRMS VDC I(AV) ER302D 200 140 200 IFSM VF IR R JC R JA TRR TSTG ER303D 300 210 300 UNITS Volts Volts Volts 3.0 Amps 75.0 Amps 0.95 1.25 5.0 0.2 6.0 80.0 35.0 -50 to +150 Volts A mA /W nS NOTES: 1. Pulse Test with PW=300 sec, 2% Duty Cycle. 2. Mounted on P.C.Board with 14mm2 (.013mm thick) copper pad areas. RATING AND CHARACTERISTIC CURVES ER302D THRU ER303D Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM Fig. 2-MAXIMUM AVERAGE FORWARD CURRENT RATING Fig. 3-TYPICAL REVERSE CHARACTERISTICS Fig. 4-TYPICAL FORWARD CAPACITANCE Fig. 5-MAXIMUM NON-REPETITIVE SURGE CURRENT Fig. 6-TYPICAL JUNCTION CAPACITANCE