FL400 THRU FL408 IN-LINE MINIATURE SINGLE PHASE SILICON BRIDGE VOLTAGE - 50 to 800 Volts CURRENT - 4.0 Amperes FL FEATURES l Surge overload rating: 200 Amperes peak l Ideal for printed circuit board l Plastic package has Underwriter Laboratory Flammability Classification 94V-O l Reliable low cost construction utilizing molded plastic technique MECHANICAL DATA Terminals: Lead solderable per MIL-STD-202, Method 208 Mounting position: Any Weight: 0.2 ounce, 5.6 grams Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Rectified Output Current at 50 Ambient Peak One Cycle Surge Overload Current Maximum Forward Voltage Drop per Bridge Element at 4.0A DC Max (Total Bridge) Reverse Leadage at Rated DC Blocking Voltage Max (Total Bridge) Reverse Leadage at Rated DC Blocking Voltage and 100 I2t Rating for fusing ( t<8.3ms) FL400 50 35 50 Typical Thermal Resistance per leg(Note 2) R JA (Note 3) R JL Operating Temperature Range Storage Temperature Range FL401 100 70 100 FL402 200 140 200 FL404 400 280 400 FL406 600 420 600 4.0 UNITS V V V A 200 1.1 A V 10.0 A 1.0 mA 93.0 19.0 2.4 -55 TO +125 -55 TO +150 A2Sec /W NOTES: 1. Thermal resistance from junction to ambient with units mounted on 3.0×3.0×0.11” thick (7.5×7.5×0.3cm) AL Plate. 2. Thermal resistance from junction to lead with units mounted on P.C.B at 0.375”(9.5mm) lead length and 0.5×0.5” (12×12mm) copper pads. FL408 800 560 800 RATING AND CHARACTERISTIC CURVES FL400 THRU FL408 Fig. 1-MAXIMUM OVERLOAD SURGE CURRENT Fig. 3-REVERSE CHARACTERISTICS Fig. 2-TYPICAL FORWARD CHARACTERISTICS Fig. 4- NON-RECURRENT SURGE RATING