APT10050B2VR
21A 0.500Ω
1000V
POWER MOS V ®
T-MAX™
Power MOS V® is a new generation of high voltage N-Channel enhancement
mode power MOSFETs. This new technology minimizes the JFET effect,
increases packing density and reduces the on-resistance. Power MOS V®
also achieves faster switching speeds through optimized gate layout.
• Faster Switching
• 100% Avalanche Tested
• Lower Leakage
• New T-MAX™ Package
D
G
(Clip-mounted TO-247 Package)
S
MAXIMUM RATINGS
Symbol
VDSS
ID
All Ratings: TC = 25°C unless otherwise specified.
Parameter
APT10050B2VR
UNIT
1000
Volts
Drain-Source Voltage
21
Continuous Drain Current @ TC = 25°C
1
Amps
IDM
Pulsed Drain Current
VGS
Gate-Source Voltage Continuous
±30
Gate-Source Voltage Transient
±40
Total Power Dissipation @ TC = 25°C
520
Watts
Linear Derating Factor
4.16
W/°C
VGSM
PD
TJ,TSTG
84
-55 to 150
Operating and Storage Junction Temperature Range
TL
Lead Temperature: 0.063" from Case for 10 Sec.
IAR
Avalanche Current
1
21
1
Repetitive Avalanche Energy
EAS
Single Pulse Avalanche Energy
°C
300
(Repetitive and Non-Repetitive)
EAR
Volts
Amps
50
4
mJ
2500
STATIC ELECTRICAL CHARACTERISTICS
BVDSS
ID(on)
RDS(on)
IDSS
IGSS
VGS(th)
Characteristic / Test Conditions
MIN
Drain-Source Breakdown Voltage (VGS = 0V, I D = 250µA)
On State Drain Current
2
(VDS > I D(on) x R DS(on) Max, VGS = 10V)
Drain-Source On-State Resistance
2
TYP
MAX
1000
Volts
21
Amps
(VGS = 10V, 0.5 ID[Cont.])
0.500
Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V)
25
Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125°C)
Ohms
µA
250
Gate-Source Leakage Current (VGS = ±30V, VDS = 0V)
Gate Threshold Voltage (VDS = VGS, ID = 2.5mA)
UNIT
±100
nA
4
Volts
2
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
USA
APT Website - http://www.advancedpower.com
405 S.W. Columbia Street
Bend, Oregon 97702-1035
Phone: (541) 382-8028
FAX: (541) 388-0364
F-33700 Merignac - France
Phone: (33) 5 57 92 15 15
FAX: (33) 5 56 47 97 61
EUROPE
Avenue J.F. Kennedy Bât B4 Parc Cadéra Nord
050-5614 Rev B
Symbol
DYNAMIC CHARACTERISTICS
Symbol
APT10050B2VR
Characteristic
Test Conditions
MIN
TYP
MAX
Ciss
Input Capacitance
VGS = 0V
6600
7900
Coss
Output Capacitance
VDS = 25V
595
830
Reverse Transfer Capacitance
f = 1 MHz
290
430
Crss
Qg
Total Gate Charge
Qgs
3
VGS = 10V
335
500
VDD = 0.5 VDSS
29
45
ID = ID[Cont.] @ 25°C
165
250
Gate-Source Charge
Qgd
Gate-Drain ("Miller ") Charge
td(on)
Turn-on Delay Time
tr
VGS = 15V
16
32
VDD = 0.5 VDSS
13
26
ID = ID[Cont.] @ 25°C
59
90
RG = 0.6Ω
8
16
TYP
MAX
Rise Time
td(off)
Turn-off Delay Time
tf
Fall Time
UNIT
pF
nC
ns
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol
IS
ISM
VSD
Characteristic / Test Conditions
MIN
21
Continuous Source Current (Body Diode)
Pulsed Source Current
1
(Body Diode)
84
Diode Forward Voltage
2
(VGS = 0V, IS = -ID[Cont.])
1.3
t rr
Reverse Recovery Time (IS = -ID[Cont.], dl S/dt = 100A/µs)
Q rr
Reverse Recovery Charge (IS = -ID[Cont.], dl S/dt = 100A/µs)
UNIT
Amps
Volts
960
ns
22
µC
THERMAL CHARACTERISTICS
Symbol
Characteristic
MIN
RθJC
Junction to Case
RθJA
Junction to Ambient
TYP
MAX
0.24
40
1 Repetitive Rating: Pulse width limited by maximum junction
temperature.
2 Pulse Test: Pulse width < 380 µS, Duty Cycle < 2%
D=0.5
0.1
0.2
0.1
0.05
Note:
PDM
Z JC, THERMAL IMPEDANCE (°C/W)
θ
050-5614 Rev B
0.3
0.01
0.02
0.005
0.01
SINGLE PULSE
t1
t2
Duty Factor D = t1/t2
Peak TJ = PDM x ZθJC + TC
0.001
10-5
10-4
°C/W
3 See MIL-STD-750 Method 3471
4 Starting T = +25°C, L = 11.34mH, R = 25Ω, Peak I = 21A
j
G
L
5 These dimensions are equal to the TO-247AD without mounting hole
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.05
UNIT
10-3
10-2
10-1
1.0
10
RECTANGULAR PULSE DURATION (SECONDS)
FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
APT10050B2VR
50
VGS=5.5V, 10V & 15V
40
5V
30
20
4.5V
10
ID, DRAIN CURRENT (AMPERES)
40
VGS=5.5V, 10V & 15V
5V
30
20
4.5V
10
4V
4V
0
0
ID, DRAIN CURRENT (AMPERES)
50
VDS> ID (ON) x RDS (ON)MAX.
250µSEC. PULSE TEST
@ <0.5 % DUTY CYCLE
40
30
20
TJ = -55°C
TJ = +125°C
10
TJ = +25°C
0
0
2
4
6
8
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 4, TYPICAL TRANSFER CHARACTERISTICS
BVDSS, DRAIN-TO-SOURCE BREAKDOWN
VOLTAGE (NORMALIZED)
ID, DRAIN CURRENT (AMPERES)
25
20
15
10
5
0
0
4
8
12
16
20
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 3, TYPICAL OUTPUT CHARACTERISTICS
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
0
100
200
300
400
500
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 2, TYPICAL OUTPUT CHARACTERISTICS
50
75
100
125
150
TC, CASE TEMPERATURE (°C)
FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE
V
GS
NORMALIZED TO
= 10V @ 0.5 I [Cont.]
D
1.2
1.1
VGS=10V
VGS=20V
1.0
0.9
0
10
20
30
40
50
ID, DRAIN CURRENT (AMPERES)
FIGURE 5, RDS(ON) vs DRAIN CURRENT
1.15
1.10
1.05
1.00
0.95
0.90
0.85
-25
0
25 50 75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE
-50
1.2
2.5
I = 0.5 I [Cont.]
D
D
V
GS
= 10V
2.0
1.5
1.0
0.5
0.0
-50
-25
0
25 50
75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
FIGURE 8, ON-RESISTANCE vs. TEMPERATURE
VGS(TH), THRESHOLD VOLTAGE
(NORMALIZED)
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
(NORMALIZED)
25
1.3
1.1
1.0
0.9
0.8
0.7
0.6
-50
-25
0
25 50 75 100 125 150
TC, CASE TEMPERATURE (°C)
FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE
050-5614 Rev B
ID, DRAIN CURRENT (AMPERES)
50
APT10050B2VR
30,000
10µS
50
OPERATION HERE
LIMITED BY RDS (ON)
100µS
10,000
10
C, CAPACITANCE (pF)
ID, DRAIN CURRENT (AMPERES)
100
1mS
5
10mS
1
100mS
TC =+25°C
TJ =+150°C
SINGLE PULSE
.5
DC
IDR, REVERSE DRAIN CURRENT (AMPERES)
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
D
16
VDS=100V
VDS=200V
VDS=500V
8
4
0
500
.01
.1
1
10
50
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 11, TYPICAL CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE
I = I [Cont.]
12
Coss
1,000
100
1
5 10
50 100
500 1000
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 10, MAXIMUM SAFE OPERATING AREA
D
5,000
Crss
.1
20
Ciss
0
100
200
300
400
500
Qg, TOTAL GATE CHARGE (nC)
FIGURE 12, GATE CHARGES vs GATE-TO-SOURCE VOLTAGE
100
50
TJ =+150°C
TJ =+25°C
10
5
1
0
0.4
0.8
1.2
1.6
2.0
VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS)
FIGURE 13, TYPICAL SOURCE-DRAIN DIODE FORWARD VOLTAGE
T-MAX™ Package Outline
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
5
15.49 (.610)
16.26 (.640)
5.38 (.212)
6.20 (.244)
Drain
20.80 (.819)
21.46 (.845)
2.87 (.113)
3.12 (.123)
4.50 (.177) Max.
0.40 (.016)
0.79 (.031)
1.65 (.065)
2.13 (.084)
19.81 (.780)
20.32 (.800)
Gate
Drain
1.01 (.040)
1.40 (.055)
Source
050-5614 Rev B
2.21 (.087)
2.59 (.102)
5.45 (.215) BSC
2-Plcs.
Dimensions in Millimeters and (Inches)
APT's devices are covered by one or more of the following U.S.patents: 4,895,810
5,256,583
5,045,903
4,748,103
5,089,434
5,283,202
5,182,234
5,231,474
5,019,522
5,434,095
5,262,336
5,528,058