DCCOM BR156W

BR1505W
DC COMPONENTS CO., LTD.
R
THRU
RECTIFIER SPECIALISTS
BR1510W
TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER
VOLTAGE RANGE - 50 to 1000 Volts
CURRENT - 15 Amperes
FEATURES
* Plastic case with heatsink for Maximum Heat
* Surge overload ratings-300 Amperes
* Low forward voltage drop
BR-25W
METAL HEAT SINK
TYP
MECHANICAL DATA
*
*
*
*
*
*
Case: Molded plastic with heatsink
Epoxy: UL 94V-0 rate flame retardant
Lead: MIL-STD-202E, Method 208 guaranteed
Polarity: As marked
Mounting position: Any
Weight: 30 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
SYMBOL
BR1505W BR151W BR152W BR154W BR156W BR158W BR1510W UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Bridge Input Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Maximum Average Forward Rectified Output Current at Tc = 55oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
Maximum Forward Voltage Drop per element at 7.5A DC
Maximum DC Reverse Current at Rated
@T A = 25 oC
DC Blocking Voltage per element
@T A = 100 oC
15
Amps
I FSM
300
Amps
VF
1.1
Volts
IR
10
500
I 2t Rating for Fusing (t<8.3ms)
I2t
374
Typical Junction Capacitance ( Note1)
CJ
300
RθJ C
2.5
T J, T STG
-55 to + 150
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
Volts
IO
uAmps
A 2 Sec
pF
0
C/W
0
C
NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts
2. Thermal Resistance from Junction to Case per leg.
246
EXIT
EXI
BACK
NEXT
BACK EXIT
NEXT BACK
NEXT
RATING AND CHARACTERISTIC CURVES ( BR1505W THRU BR1510W )
DC COMPONENTS CO., LTD.
R
247
EXIT
EXI
BACK
NEXT
BACK EXIT
NEXT BACK
NEXT