GaAs IC 4 x 2 Switch Matrix 0.7–3.0 GHz AS212-93 Applications: ■ DBS Switching Applications, Cable Modems, Cable TV Features ■ Four Inputs, Two Output Switches ■ Any Input Can Be Directed To Either Output TSSOP-16 0.0256 (0.65 mm) BSC PIN 16 0.009 (0.22 mm) REF. 0.173 (4.40 mm) ± 0.004 (0.10 mm) 0.252 (6.4 mm) BSC PIN 1 INDICATOR PIN 1 ■ Only Requires 4 Control Lines ■ Low DC Power Consumption EXPOSED PAD ■ Small Low Cost TSSOP-16 Plastic Package 0.118 (3.0 mm) MAX. 0.118 (3.0 mm) MAX. 0.197 (5.00 mm) ± 0.004 (0.10 mm) 0.035 (0.90 mm) + 0.006 (0.15 mm)/ -0.004(-0.10 mm) R 0.004 (0.09 mm) MIN. 0.006 (0.15 mm) MAX. 0.002 (0.05 mm) MIN. 0.047 (1.20 mm) MAX. A A 0.010 (0.25 mm) ■ High Isolation Between Ports 0˚–8˚ 0.024 (0.60 mm) ± 0.006 (0.15 mm) Description The AS212-93 is an IC FET 4 x 2 matrix switch in a low cost TSSOP-16 exposed paddle plastic package. The exposed paddle should be grounded. The AS212-93 enables 16 states directing any of the four inputs to any of the two outputs. DC block capacitors are required at each RF port. States are selected by 4 positive controls. All ports are absorptive. The AS212-93 switch is suitable for DBS switching applications. Electrical Specifications at 25°C (0, +5 V) Parameter1 Frequency Insertion Loss Min. 0.70–0.95 0.95–1.45 1.45–2.15 2.15–3.00 Insertion Loss Flatness 0.70–3.00 Isolation 0.70–0.95 0.95–1.45 1.45–2.15 2.15–3.00 25.0 23.0 22.5 19.5 Typ. Max. Unit 6.50 6.50 6.75 7.00 7.00 7.00 7.30 7.50 dB dB dB dB 1.0 2.0 33.0 28.5 28.5 25.5 dB dB dB dB dB Return Loss Insertion Loss State 0.70–3.00 9 11 dB Return Loss Isolation State 0.70–3.00 9 11 dB Min. Typ. Operating Characteristics at 25°C (0, +5 V) Parameter P-1 dB Condition 0, +5 V VCC Control Voltages V1, V2, V3, V4 Max. 12 Unit dBm @ 400 µA Max. 4.5 5.5 V Low @ 50 µA Max. High @ 50 µA Max. 0 2.5 0.2 VCC V V 1. All measurements made in a 50 Ω system. Skyworks Solutions, Inc. [781] 376-3000 • Fax [781] 376-3100 • Email [email protected] • www.skyworksinc.com Specifications subject to change without notice. 12/02A 1 GaAs IC 4 x 2 Switch Matrix 0.7–3.0 GHz AS212-93 Typical Performance Data (0, +3 V) 0 -1 -2 Isolaiton (dB) Loss (dB) -3 -4 -5 -6 -7 -8 -9 -10 0.5 1.0 1.5 2.0 2.5 3.0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Frequency (GHz) Typical Insertion Loss (Various States Shown) Typical Isolation (Including Worst Case) 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 0.5 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 1.0 1.5 2.0 2.5 3.0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Frequency (GHz) Return Loss Insertion Loss State Return Loss Isolation State Absolute Maximum Ratings Characteristic Value RF Input Power 15 dBm Supply Voltage +6 V Control voltage +6 V Operating Temperature -40 to +85°C Storage Temperature -65 to +150°C Note: Exceeding these parameters may cause irreversible damage. 2 3.0 0 Return Loss S11 and S22 (dB) Return Loss S11 and S22 (dB) 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60 Skyworks Solutions, Inc. [781] 376-3000 • Fax [781] 376-3100 • Email [email protected] • www.skyworksinc.com Specifications subject to change without notice. 12/02A 3.0 GaAs IC 4 x 2 Switch Matrix 0.7–3.0 GHz AS212-93 Truth Table Pin Out 0 0 1 I1->LO & I2->RO 0 0 0 1 2 I1->LO & I3->RO 0 0 1 0 3 I1->LO & I4->RO 0 0 1 1 4 I2->LO & I1->RO 0 1 0 0 5 I2->LO & I2->RO 0 1 0 1 6 I2->LO & I3->RO 0 1 1 0 7 I2->LO & I4->RO 0 1 1 1 8 I3->LO & I1->RO 1 0 0 0 9 I3->LO & I2->RO 1 0 0 1 10 I3->LO & I3->RO 1 0 1 0 11 I3->LO & I4->RO 1 0 1 1 12 I4->LO & I1->RO 1 1 0 0 13 I4->LO & I2->RO 1 1 0 1 14 I4->LO & I3->RO 1 1 1 0 15 I4->LO & I4->RO 1 1 1 1 I2 I4 B1 B2 VCC RO GND GND I1 I3 9 0 11 10 0 15 14 13 12 I1->LO & I1->RO 16 0 8 SW B2 7 SW B1 6 SW A2 GND GND 5 SW A1 4 State # 3 LO Signal Path (Insertion Loss Path)1 2 A2 A1 GND For RO (Right Output) 1 Controls For LO (Left Output) Unused leads and package bottom should be well grounded. All paths are bidirectional. Test Board Control B1 Control A2 Control A1 Control B2 B2 A1 GND Back of Board B1 A2 VCC VCC 1 LO RO In2 1. All other paths are in isolation. “1” = 5 V. “0” = 0 V. In1 In4 SK39616 REV 2 In3 Bias VCC before applying bias to control lines. Control lines need to be grounded for “0 V”. Control lines can not be left open circuit. Skyworks Solutions, Inc. [781] 376-3000 • Fax [781] 376-3100 • Email [email protected] • www.skyworksinc.com Specifications subject to change without notice. 12/02A 3 GaAs IC 4 x 2 Switch Matrix 0.7–3.0 GHz AS212-93 Tape Dimensions Label P1 0 54 00 17 30 S A Y. C QT RIE V. V. S T RE RE DU4 00 P0 P2 D0 -0 IN 9 A 7-9 LTI 903 40 PH 30 U E-9 38-1 _ AL MP1 ER-MOD - 13 _ _ _ _ _ E1 S AF C /N _ _ W ATE T. P _ _ T _ N E D US AL ES IO IV 1 C ISU L T UT SIT 43 N S V EE C A SE ICE .A. P IC V .S AT DE IN U ST E AD M F W Cover Tape W1 Reel D1 T1 (Cover Tape Thickness) T (Carrier Tape Thickness) 8˚ MAX. Carrier Tape K0 A0 Description Symbol TSSOP-16 Length A0 0.80±0.10 Width B0 5.40±0.10 Depth K0 1.60±0.10 Pitch P1 8.00±0.10 Bottom Hole Diameter D1 1.60±0.10 Diameter D0 1.50±0.10 Pitch P0 4.00±0.10 Position E1 1.75±0.10 Cavity 5˚ MAX. B0 SOIC, MSOP, QSOP, SSOP and TSSOP Devices 8, 10, 14, 16, 20, 28 Leads Pin 1 Perforation Carrier Tape Width W 12.0±0.30 Thickness T 0.30±0.05 User Direction of Feed Standard Reel Size Standard Reel Quantity 7" 13" 1,000 3,000 Cover Tape Width W1 9.20±0.10 Tape Thickness T1 0.062±0.01 Cavity to Perforation (Width Direction) F 7.50±0.10 Cavity to Perforation (Length Direction) P2 2.00±0.1 Distance Note: All dimensions are in mm. 4 Skyworks Solutions, Inc. [781] 376-3000 • Fax [781] 376-3100 • Email [email protected] • www.skyworksinc.com Specifications subject to change without notice. 12/02A