FSB660/FSB660A FSB660 / FSB660A C E B TM SuperSOT -3 (SOT-23) PNP Low Saturation Transistor These devices are designed with high current gain and low saturation voltage with collector currents up to 2A continuous. Absolute Maximum Ratings* Symbol TA = 25°C unless otherwise noted Parameter FSB660/FSB660A Units VCEO Collector-Emitter Voltage 60 V VCBO Collector-Base Voltage 60 V VEBO Emitter-Base Voltage 5 V IC Collector Current - Continuous 2 A TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150°C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics TA = 25°C unless otherwise noted Max Characteristic Symbol Units FSB660/FSB660A PD Total Device Dissipation 500 mW RθJA Thermal Resistance, Junction to Ambient 250 °C/W 2000 Fairchild Semiconductor International FSB660/FSB660A Rev. B (continued) Electrical Characteristics Symbol TA = 25°C unless otherwise noted Parameter Test Conditions Min Max Units OFF CHARACTERISTICS BVCEO Collector-Emitter Breakdown Voltage IC = 10 mA 60 V BVCBO Collector-Base Breakdown Voltage IC = 100 µA 60 V BVEBO Emitter-Base Breakdown Voltage IE = 100 µA 5 V ICBO Collector Cutoff Current VCB = 30 V 100 VCB = 30 V, TA=100°C 10 nA uA VEB = 4V 100 nA IEBO Emitter Cutoff Current ON CHARACTERISTICS* hFE DC Current Gain IC = 100 mA, VCE = 2 V 70 IC=500mA, VCE =2V FSB660 100 FSB660A VCE(sat) Collector-Emitter Saturation Voltage 250 IC = 1 A, VCE = 2 V 80 IC = 2 A, VCE = 2 V 40 300 550 IC = 1 A, IB = 100 mA 300 mV IC = 2 A, IB=200 mA FSB660 FSB660A 350 1.25 V 300 VBE(sat) Base-Emitter Saturation Voltage IC = 1 A, IB = 100 mA VBE(on) Base-Emitter On Voltage IC = 1 A, VCE = 2 V 1 V 30 pF SMALL SIGNAL CHARACTERISTICS Cobo Output Capacitance VCB = 10 V, IE = 0, f = 1MHz fT Transition Frequency IC = 100 mA,VCE = 5 V, f=100MHz 75 - *Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0% fsb660.lwpPrPA 7/10/98 RevB FSB660/FSB660A PNP Low Saturation Transistor 1.4 β = 10 1.2 1 - 40°C 0.8 0.6 25°C 0.4 125°C 0.2 0.001 0.01 0.1 1 I C - COLLECTOR CURRENT (A) 10 VBEON- BASE-EMITTER ON VOLTAGE (V) Base-Emitter Saturation Voltage vs Collector Current Base-Emitter On Voltage vs. Collector Current 1.6 Vce = 2.0V 1.4 1.2 1 - 40°C 0.8 0.6 0.8 125°C 0.2 0.0001 0.001 0.01 0.1 1 I C - COLLECTOR CURRENT (A) 400 β = 10 f V=ce1.0MHz = 2.0V CAPACITANCE (pf) 350 0.6 10 Input/Output Capacitance vs. Reverse Bias Voltage 0.7 125°C 0.5 25°C 0.4 0.3 - 40°C 0.2 0.1 0 0.01 25°C 0.4 Collector-Emitter Saturation Voltage vs Collector Current Cobo 300 250 200 150 C ibo 100 50 0.1 1 I C - COLLECTOR CURRENT (mA) 10 0 0.1 0.5 1 10 20 V CE - COLLECTOR VOLTAGE (V) 50 100 Current Gain vs. Collector Current 1000 900 H FE - CURRENT GAIN VCESAT- COLLECTOR-EMITTER VOLTAGE (V) VBESAT -BASE-EMITTER SATURATION VOLTAGE(V) Typical Characteristics 125°C Vce = 2.0V 800 700 600 25°C 500 400 300 200 - 40°C 100 0 0.0001 0.001 0.01 0.1 1 I C - COLLECTOR CURRENT (mA) 10 PA SuperSOTTM-3 Tape and Reel Data and Package Dimensions SSOT-3 Packaging Configuration: Figure 1.0 Customize Label Packaging Description: SSOT-3 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table. Antistatic Cover Tape These full reels are individually labeled and placed inside a standard intermediate made of recyclable corrugated brown paper with a Fairchild logo printing. One pizza box contains eight reels maximum. And these intermediate boxes are placed inside a labeled shipping box which comes in different sizes depending on the number of parts shipped. Human Readable Embossed Label Carrier Tape 3P 3P 3P 3P SSOT-3 Std Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Standard (no flow code) TNR D87Z SSOT-3 Std Unit Orientation TNR 3,000 10,000 7" Dia 13" 187x107x183 343x343x64 Max qty per Box 24,000 30,000 Weight per unit (gm) 0.0097 0.0097 Weight per Reel (kg) 0.1230 0.4150 343mm x 342mm x 64mm Intermediate box for D87Z Option Human Readable Label Note/Comments Human Readable Label sample Human Readable Label 187mm x 107mm x 183mm Intermediate Box for Standard Option SSOT-3 Tape Leader and Trailer Configuration: Figure 2.0 Carrier Tape Cover Tape Components Trailer Tape 300mm minimum or 75 empty pockets Leader Tape 500mm minimum or 125 empty pockets August 1999, Rev. C SuperSOTTM-3 Tape and Reel Data and Package Dimensions, continued SSOT-3 Embossed Carrier Tape Configuration: Figure 3.0 P0 P2 D0 D1 T E1 W F E2 Wc B0 Tc A0 P1 K0 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 SSOT-3 (8mm) 3.15 +/-0.10 2.77 +/-0.10 W 8.0 +/-0.3 D0 D1 E1 E2 1.55 +/-0.05 1.125 +/-0.125 1.75 +/-0.10 F 6.25 min 3.50 +/-0.05 P1 P0 4.0 +/-0.1 4.0 +/-0.1 K0 T 1.30 +/-0.10 0.228 +/-0.013 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). Wc 0.06 +/-02 0.5mm maximum 20 deg maximum Typical component cavity center line B0 5.2 +/-0.3 Tc 0.5mm maximum 20 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) SSOT-3 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max See detail AA Dim N 7" Diameter Option B Min Dim C See detail AA W3 13" Diameter Option Dim D min W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size Reel Option Dim A Dim B 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 2.165 55 0.331 +0.059/-0.000 8.4 +1.5/0 0.567 14.4 0.311 – 0.429 7.9 – 10.9 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 4.00 100 0.331 +0.059/-0.000 8.4 +1.5/0 0.567 14.4 0.311 – 0.429 7.9 – 10.9 8mm 7" Dia 7.00 177.8 8mm 13" Dia 13.00 330 Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL) July 1999, Rev. C SuperSOTTM-3 Tape and Reel Data and Package Dimensions, continued SuperSOT-3 (FS PKG Code 32) 1:1 Scale 1:1 on letter size paper Di mensions shown below are in: inches [mil limeters] Part Weight per unit (gram): 0.0097 September 1998, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST FASTr™ GTO™ SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. E