SSE FR102G

SHANGHAI SUNRISE ELECTRONICS CO., LTD.
FR101G THRU FR107G
GLASS PASSIVATED
FAST RECOVERY RECTIFIER
TECHNICAL
SPECIFICATION
VOLTAGE: 50 TO 1000V CURRENT: 1.0A
FEATURES
DO - 41
• Molded case feature for auto insertion
• Glass passivated chip
• High current capability
• Low leakage current
• Fast switching for high efficiency
• High surge capability
• High temperature soldering guaranteed:
250oC/10sec/0.375"(9.5mm) lead length
at 5 lbs tension
MECHANICAL DATA
• Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O
recognized flame retardant epoxy
• Polarity: Color band denotes cathode
• Mounting position: Any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load,
derate current by 20%)
RATINGS
SYMBOL
FR
FR
FR
FR
101G 102G 103G 104G
50
100
200 400
35
70
140 280
50
100
200 400
FR
FR
FR
UNITS
105G 106G 107G
600
800 1000
V
420
560
700
V
600
800 1000
V
VRRM
Maximum Repetitive Peak Reverse Voltage
VRMS
Maximum RMS Voltage
VDC
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
IF(AV)
1.0
(9.5mm lead length, at Ta=55oC)
Peak Forward Surge Current (8.3ms single
IFSM
30.0
half sine-wave superimposed on rated load)
Maximum Instantaneous Forward Voltage
VF
1.3
(at rated forward current )
5.0
Maximum DC Reverse Current
Ta=25oC
IR
o
100
(at rated DC blocking voltage)
Ta=100 C
150
500
Maximum Reverse Recovery Time (Note 1)
trr
250
15.0
CJ
Typical Junction Capacitance
(Note 2)
50
Typical Thermal Resistance
(Note 3) Rθ(ja)
-65 to +150
Storage and Operation Junction Temperature TSTG,TJ
Note:
1.Reverse recovery condition IF=0.5A, IR=1.0A, Irr=0.25A
2.Measured at 1.0 MHz and applied voltage of 4.0Vdc
3.Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C. board mounted
A
A
V
µA
µA
nS
pF
o
C/W
o
C
http://www.sse-diode.com