A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS TOP View LEDs Part Number: 67-21UWC Package outlines & Re-flow Profile Reflow Temp/Time Soldering iron Basic spec is U 5sec when 260℃. If temperature is higher, time should be shorter (+10℃Æ -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230℃ . ITEM MATERIALS Resin (mold) Epoxy Lens color Yellow Diffused Printed circuit board BT Material InGaN Emitted color White For reflow soldering (Propose) NOTES: 1. All dimensions are in millimeters (inches); 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 3. Polarity referring onto the cathode mark is reversed on the red. 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21UWC ELECTRO-OPTICAL CHARACTERISTICS (SDR) Parameter (TA=25℃) Test Condition Symbol Value MIN. TYP. MAX. 120 Viewing angle at 50% IV IF=10mA 2θ1/2 Forward voltage IF=20mA VF − 3.2 3.5 Luminous intensity IF=20mA IV − 290 X − 0.31 − − 0.32 − IF=20mA Chromaticity Y Peak pulsing current (1/10 duty f=1kHz) IFP Deg − V mcd − 100 Absolute maximum ratings (SDR) Parameter Unit mA (TA=25℃) Symbol Value Unit Forward current IF 25 mA Reverse voltage VR 5 V Reverse current IR 50 μA ESD 150 V Power Dissipation PD 110 mW Operating temperature range Top -40 ~+85 ℃ Storage temperature range Tstg -40 ~+100 ℃ Electrostatic Discharge 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21UWC Test items and results of reliability Test Sample Size Ac/Re Hours/Cycle NO Item Test Conditions 1 Solder Heat TEMP：260±5℃ 6 min. 22 PCS 0/1 2 Temperature Cycle H：+100℃ 30min ∫ 5min L：-40℃ 30min 300 CYCLES 22 PCS 0/1 3 Thermal Shock H：+100℃ 5min ∫ 10set L：-10℃ 5min 300 CYCLES 22 PCS 0/1 4 High Temperature Storage TEMP：100℃ 1000 HRS 22 PCS 0/1 5 Low Temperature Storage TEMP：-40℃ 1000 HRS 22 PCS 0/1 6 DC Operating Life IF=20mA 1000 HRS 22 PCS 0/1 7 High Temperature / High Humidity 85℃ / 85%RH 1000 HRS 22 PCS 0/1 ＊ Refer to reliability test standard specification for in this line. 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21UWC Color Ranks 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21UWC Typical Electro-Optical Characteristics 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21UWC Typical Electro-Optical Characteristics 2009/2/20