ACTIVE-SEMI ACT8898

ACT8898
®
Product Brief, 29-Nov-10
Advanced PMU for Marvell Aspen
FEATURES
GENERAL DESCRIPTION
•
•
•
•
•
•
•
The ACT8898 is a complete, cost effective, highlyefficient ActivePMUTM power management solution,
optimized for the unique power, voltagesequencing, and control requirements of the Marvell
Aspen processor.
Optimized for Marvell Aspen Processors
Three Step-Down DC/DC Converters
Four Low-Dropout Linear Regulators
I2CTM Serial Interface
This device features three step-down DC/DC
converters and four low-noise, low-dropout linear
regulators.
Advanced Enable/Disable Sequencing Controller
Minimal External Components
Tiny 5×5mm TQFN55-32 Package
− 0.75mm Package Height
− Pb-Free and RoHS Compliant
The three DC/DC converters utilize a highefficiency, fixed-frequency (2MHz), current-mode
PWM control architecture that requires a minimum
number of external components. Two DC/DCs are
capable of supplying up to 1150mA of output
current, while the third supports up to 1300mA. All
four low-dropout linear regulators are highperformance, low-noise, regulators that supply up to
150mA, 150mA, 320mA, and 320mA, respectively.
APPLICATIONS
•
•
•
•
•
Personal Navigation Devices
Portable Media Players
The ACT8898 is available in a compact, Pb-Free
and RoHS-compliant TQFN55-32 package.
Tablet Devices
Smart Phones
MIDs
TYPICAL APPLICATION DIAGRAM
Innovative PowerTM
ActivePMUTM is trademark of Active-Semi.
I2CTM is a trademark of NXP.
-1-
www.active-semi.com
Copyright © 2010 Active-Semi, Inc.
ACT8898
®
Product Brief, 29-Nov-10
PRODUCT OPTIONS
Block
Function
Output Voltage
Capability
REG1
Step-Down DC/DC
REG2
Step-Down DC/DC
REG3
Step-Down DC/DC
1300mA
REG4
LDO
150mA
REG5
LDO
REG6
LDO
REG7
LDO
1150mA
Adjustable, or 0.6V to 3.9V
1150mA
150mA
0.6V to 3.9V
320mA
320mA
FUNCTIONAL BLOCK DIAGRAM
VP1
To Battery
ACT8898
SW1
OUT1
VP2
OUT1
nPBIN
PUSH BUTTON
GP1
OUT2
VP2
nRSTO
To Battery
SW2
OUT2
OUT2
OUT2
GP2
nPBSTAT
VP3
OUT2
To Battery
SW3
nIRQ
OUT3
OUT3
System
Control
GP3
PWRHLD
INL45
nHIB
REG4
LDO
VSEL
SCL
SDA
REG5
LDO
Serial
Interface
OUT4
OUT4
OUT5
OUT5
INL67
VDDREF
To Battery
REG6
LDO
REFBP
Reference
REG7
LDO
GA
To Battery
To Battery
OUT6
OUT6
OUT7
OUT7
EP
Innovative PowerTM
-2-
www.active-semi.com
Copyright © 2010 Active-Semi, Inc.