AZM AZ100ELT23_12

AZ100ELT23
Dual Differential PECL to
CMOS/TTL Translator
www.azmicrotek.com
DESCRIPTION
The AZ100ELT23 is a dual differential PECL to CMOS/TTL translator.
Because PECL (Positive ECL) levels are used, only VCC and ground are
required. The small outline 8-lead packaging and the low skew, dual gate
design of the AZ100ELT23 makes it ideal for applications that require the
translation of a clock and a data signal.
The AZ100ELT23 is a direct replacement for the ON Semi MC100ELT23
BLOCK DIAGRAM
FEATURES
•
•
•
•
•
3.5ns typical propagation
delay
<500ps typical output to
output skew
Differential PECL inputs
Flow through pinouts
CMOS/TTL outputs
APPLICATIONS
•
•
LVPECL to LVCMOS/LVTTL
translations
PECL to CMOS/TTL
translations
PACKAGE AVAILABILITY
•
•
Order Number
SOIC8
o Green/RoHS/Pb-Free
MSOP8
o Green/RoHS/Pb-Free
Package
Marking
AZ100ELT23DG
SOIC8
HT23G2
AZ100ELT23T+1
MSOP8
HT23+2
1
1
Tape & Reel - Add 'R1' at end of order number for 7in (1k parts), 'R2' (2.5k) for 13in
2
See www.azmicrotek.com for date code format
www.azmicrotek.com
+1-480-962-5881
Request a Sample
1630 S Stapley Dr, Suite 127
Mesa, AZ 85204 USA
May 2012, Rev 2.0
Arizona Microtek, Inc.
AZ100ELT21
Differential PECL to CMOS/TTL
Translator
PIN DESCRIPTION AND CONFIGURATION
Table 1 - Pin Description
Pin
1
Name
D0
Type
Input
Function
PECL Input
2
D0
Input
PECL Input
3
D1
Input
PECL Input
4
D1
Input
PECL Input
5
6
7
8
GND
Q1
Q0
VCC
Power
Output
Output
Power
Ground
Data Output
Data Output
Positive Supply
D0 1
8 VCC
D0 2
7 Q0
SOIC8
MSOP8
D1 3
6 Q1
D1 4
5 GND
Figure 1 - Pin Configuration for SOIC8/MSOP8
www.azmicrotek.com
+1-480-962-5881
Request a Sample
2
May 2012, Rev 2.0
Arizona Microtek, Inc.
AZ100ELT21
Differential PECL to CMOS/TTL
Translator
ENGINEERING NOTES
The AZ100ELT23 provides a VBB output for single-ended use or a DC bias reference for AC coupling to the device. For
single-ended input applications, the VBB reference should be connected to one side of the D / D differential input pair.
The input signal is then fed to the other D / D input. The VBB pin should be used only as a bias for the AZ100ELT21 as
its sink/source capability is limited. When used, the VBB pin should be bypassed to ground via a 0.01µF capacitor.
NOTE: Specifications in the ECL/PECL tables are valid when thermal equilibrium is established.
PERFORMANCE DATA
Table 2 – Absolute Maximum Ratings
Absolute Maximum Ratings are those values beyond which device life may be impaired.
Symbol
Characteristic
Condition
Rating
Unit
VCC
DC Power Supply
Referenced to GND
0 to +7.0
V
TA
Operating Temperature Range
-40 to +85
°C
TSTG
Storage Temperature Range
-65 to +150
°C
ESDHBM
Human Body Model
2500
V
ESDMM
Machine Model
200
V
ESDCDM
Charged Device Model
2500
V
Table 3 – TTL/CMOS Input DC Characteristics
TTL/CMOS DC Characteristics (GND = 0.0V, VCC = +3.3V to 5.5V)
Symbol
Characteristic
Condition
Min
VOH
Output HIGH Voltage
IOH = -24mA
VCC - 0.5V
VOL
Output LOW Voltage
IOL = 24mA
ICC
Power Supply Current
0°C to 85°C
ICC
Power Supply Current
-40°C to 85°C
ICC
Output Short Circuit Current
www.azmicrotek.com
+1-480-962-5881
Request a Sample
Typ
Max
Unit
V
0.5
V
9
15
mA
9
17.6
mA
100
mA
3
May 2012, Rev 2.0
Arizona Microtek, Inc.
AZ100ELT21
Differential PECL to CMOS/TTL
Translator
Table 4 - LVPECL DC Characteristics
100K LVPECL DC Characteristics (GND = 0.0V, VCC = +3.3V)
Symbol
-40 °C
Characteristic
Min
Typ
0 °C
Max
Min
Typ
25 °C
Max
Min
Typ
85 °C
Max
Min
Typ
Unit
Max
VIH
Input HIGH Voltage
2135
2420
2135
2420
2135
2420
2135
2420
mV
VIL
Input LOW Voltage
1490
1825
1490
1825
1490
1825
1490
1825
mV
VPP
Minimum Input Swing
200
VCMR
Common Mode Range
IIL
Input LOW Current
1.2
0.5
IIH
Input HIGH Current
1
1
200
VCC
200
1.2
0.5
VCC
150
200
1.2
0.5
VCC
150
mV
1.2
0.5
150
VCC
V
µA
150
µA
200mV input guarantees full logic swing at the output
Table 5 - PECL DC Characteristics
100K PECL DC Characteristics (GND = 0.0V, VCC = +5.0V)
Symbol
-40 °C
Characteristic
Min
Typ
0 °C
Max
Min
Typ
25 °C
Max
Min
Typ
85 °C
Max
Min
Typ
Unit
Max
VIH
Input HIGH Voltage
3835
4120
3835
4120
3835
4120
3835
4120
mV
VIL
Input LOW Voltage
3190
3525
3190
3525
3190
3525
3190
3525
mV
VPP
Minimum Input Swing
200
VCMR
Common Mode Range
IIL
Input LOW Current
1.2
0.5
IIH
Input HIGH Current
1
1
200
VCC
1
200
1.2
0.5
VCC
150
1
200
1.2
0.5
VCC
150
1
mV
1.2
0.5
150
VCC
V
µA
150
µA
200mV input guarantees full logic swing at the output
Table 6 - AC Characteristics
AC Characteristics (GND = 0.0V, VCC = +3.0V to +5.5V)
Symbol
Characteristic
-40 °C
Min
Typ
0 °C
Max
Min
Typ
25 °C
Max
Min
Typ
85 °C
Max
Min
Typ
Unit
Max
Propagation Delay to Output1
VCC = 4.5 to 5.5V
2
5.5
2
5.5
2
5.5
2
5.5
ns
Propagation Delay to Output1
VCC = 3.0 to 3.6V
3.5
7
3.5
7
3.5
7
3.5
7
ns
tPLH/tPHL
1
CL = 20pF
www.azmicrotek.com
+1-480-962-5881
Request a Sample
4
May 2012, Rev 2.0
Arizona Microtek, Inc.
AZ100ELT21
Differential PECL to CMOS/TTL
Translator
PACKAGE DIAGRAM
SOIC8
Green/RoHS compliant/Pb-Free
MSL=1
www.azmicrotek.com
+1-480-962-5881
Request a Sample
5
May 2012, Rev 2.0
Arizona Microtek, Inc.
AZ100ELT21
Differential PECL to CMOS/TTL
Translator
PACKAGE DIAGRAM
MSOP8
Green/RoHS compliant/Pb-Free
MSL=1
Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice.
Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for
any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of
any product or circuit and specifically disclaims any and all liability, including without limitation special,
consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of
others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems
intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc.
product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona
Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold
Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of
personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part.
www.azmicrotek.com
+1-480-962-5881
Request a Sample
6
May 2012, Rev 2.0