NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input 0.6 Vdc - 5.0 Vdc/50 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. Jan. 21, 2010 xRP2-50E1Ax RoHS Compliant Rev.H Features Non-Isolated Output Over-Voltage Shutdown High Efficiency OCP/SCP Fixed Switching Frequency Low Output Ripple Low Cost Power Good Signal Excellent Thermal Performance Remote On/Off Wide Input Voltage Range Wide Output Trim Range Applications Networking Computers and peripherals Telecommunications Description The xRP2-50E1Ax is a non-isolated dc/dc converter that operates over a wide range of input voltage (Vin = 5 Vdc - 13.8 Vdc). This unit can provide a precisely regulated output voltage from 0.6 Vdc to 5.0 Vdc and can deliver up to 50 A of output current. This unit is designed to be highly efficient and low cost. The converter is provided in an industry standard package. Part Selection Output Voltage Input Voltage Max. Output Current Max. Output Power Part Number Horizontal Mount Part Number Vertical Mount 250 W Typical Efficiency (Vo=1.8 Vdc） 86% 0.6 V - 5.0 V 5.0 V - 13.8 V 50 A 0RP2-50E1A0 VRP2-50E1A0 0.6 V - 5.0 V 5.0 V - 13.8 V 50 A 250 W 86% 0RP2-50E1A1 VRP2-50E1A1 Note: Add “G” suffix at the end of the model numbers listed above to indicate “Tray Packaging”. Part Number Explanation x R P2 – 50 E 1A x 1 2 3 4 5 6 7 1---Using “0” means horizontal mount, and using “V” means Vertical mount 2---RoHS 6, change “R” to “7” means RoHS 5 3---Series name (SIP) 4---Series code (output current 50A) 5---Input range (5-13.8V) 6---Output voltage (0.6-5.0V) 7---Suffix, “0” means model has a trim resistor equation “1” means model has a trim voltage equation Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input 0.6 Vdc - 5.0 Vdc/50 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. Jan. 21, 2010 Absolute Maximum Ratings Min Typ Max Input Voltage (continuous) Parameter -0.3 V - 15 V Output Enable Terminal Voltage -0.3 V - 15 V Ambient Temperature 0 C - 70 C Storage Temperature -55 C - 125 C Min Typ Max 5V 1.8*Vo 12 V 12 V 13.8 V 13.8 V Input Current (full load) - - 38 A Input Reflected Ripple Current (pk-pk) - 35 mA - Input Reflected Ripple Current (rms) - 10 mA - I t Inrush Current Transient - - 1A s Turn-on Voltage Threshold 4.4 V 4.6 V 4.8 V Under Voltage Threshold 4.0 V 4.3 V 4.6 V Notes Input Specifications Parameter Notes Input Voltage Vo≤ 2.8 V Vo > 2.8 V 2 With simulated source impedance of 1 uH, 5 Hz to 20 MHz. Use a 1000 uF/16 V electrolytic capacitor with ESR=0.1 ohm max, at 100 kHz at 25°C. 2 Note: All specifications are typical at 25 C unless otherwise stated. Output Specifications Parameter Output Voltage Set Point Accuracy Vo≥1 V Vo＜1 V Load Regulation Vo≥2.5 V Vo＜2.5 V Line Regulation Vo≥2.5 V Vo＜2.5 V Regulation Over Temperature (0 C to +70 C) Output Current Current Limit Threshold Output Ripple and Noise (pk-pk) Vo=5.0 V Vo=3.3 V Vo=2.5 V Vo=1.5 V Vo=1.0 V Vo=0.6 V Min Typ Max -1.5 % Vo -10 mV - +1.5 % Vo +10 mV - - 0.6% Vo 12 mV - - 0.3% Vo 9 mV - - 0.02% Vo/C 0A - 50 A 105% Io 130% Io 180% Io - - 110 mV 100 mV 100 mV 80 mV 60 mV 60 mV Notes Vin=Vinmin, Io=Iomax Test conditions: 0-20MHz BW, with a 1µF ceramic capacitor and a 10 uF Tantalum cap at output. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input 0.6 Vdc - 5.0 Vdc/50 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. Jan. 21, 2010 Output Specifications (continued) Parameter Output Ripple and Noise (rms) Vo=5.0 V Vo=3.3 V Vo=2.5 V Vo=1.5 V Vo=1.0 V Vo=0.6 V Min Typ Max - - 35 mV 35 mV 35 mV 30 mV 25 mV 25 mV Turn On Time - - 10 mS Rise Time - - 3 mS Overshoot at Turn on and off - - 0.5% 0 uF - 4700 uF Output Capacitance ESR≥1 mΩ Notes Test conditions: 0-20MHz BW, with a 1µF ceramic capacitor and a 10 uF Tantalum cap at output. Transient Response 50% ~ 100% Max Load Settling Time VO=All 100% ~ 50% Max Load Settling Time - - 300 mV - - 100 uS - - 300 mV - - 100 uS Test conditions: di/dt = 10 A/uS; Vin =12 V; Co=0 uF. Note: All specifications are typical at nominal input, full load at 25°C unless noted. General Specifications Parameter Min Typ Max - 93% 91% 88% 86% 84% 82% 75% 68% 330 kHz - 0.6 V - 5V 110% Vo,set 115%Vo,set 130%Vo,set Notes Efficiency Vo=5.0 V Vo=3.3 V Vo=2.5 V Vo=1.8 V Vo=1.5 V Vo=1.2 V Vo=1.0 V Vo=0.6 V Switching Frequency Output Voltage Trim Range Over Voltage Protection MTBF 1.45 x 1.1 x 0.783 36.83 x 27.94 x 19.9 Dimensions (vertical mount) Inches (L × W × H) Millimeters (L × W × H) 1.45 x 1.1 x 0.743 36.83 x 27.94 x 18.87 Weight - 28.5 g Vin=12 V, Io=full load. Calculated Per Bell Core SR332 (IO =40 A, Vo=1.92 V; Vin=12 V; Ta = 25 C, 100LFM forced air flow.) 3,361,100 hours Dimensions (horizontal mount) Inches (L × W × H) Millimeters (L × W × H) Trim pin is open, Vo = 0.6 V. - Note: All specifications are typical at 25 C unless otherwise stated. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input 0.6 Vdc - 5.0 Vdc/50 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. Jan. 21, 2010 Control Specifications Parameter Min Typ Max Notes Signal Low (Unit Off) -0.3 V - 0.8 V Signal High (Unit On) 2V - Vin,max Current Source/Sink 0 mA - 3.3 mA Remote On/Off (Active High) Remote On/Off pin is open, unit is off. PwGood (PowerGood) PwGood = High = Power Good 2.4 V - 5.25 V - - 2 mA PwGood = Low = Power Not Good 0V - 0.4 V - - 4 mA Output Trim Equation xRP2-50E1A0--- Trim resistor equation R trim 1 .2 ( K ) Vo 0 . 6 Vout Module Trim+ Rtrim Trim– xRP2-50E1A1--- Trim voltage equation Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input 0.6 Vdc - 5.0 Vdc/50 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. Jan. 21, 2010 Efficiency Data Efficiency Curve Vo=1.2 V 85.0% 95.0% 80.0% 90.0% 75.0% 5V 12 V 70.0% 65.0% Efficiency Efficiency Efficiency Curve Vo=0.6 V 13.8 V 60.0% 12 V 75.0% 13.8 V 65.0% 50.0% 60.0% 5 12.5 25 37.5 50 5 12.5 25 37.5 Output Current (A) Output Current (A) Efficiency Curve Vo=1.8 V Efficiency Curve Vo=2.5 V 95.0% 100.0% 90.0% 95.0% 85.0% 5V 12 V 80.0% 75.0% Efficiency Efficiency 5V 80.0% 70.0% 55.0% 13.8 V 50 90.0% 5V 85.0% 12 V 80.0% 70.0% 75.0% 65.0% 70.0% 13.8 V 65.0% 60.0% 5 12.5 25 37.5 50 5 12.5 25 37.5 Output Current (A) Output Current (A) Efficiency Curve Vo=3.3 V Efficiency Curve Vo=5.0 V 100.0% 100.0% 95.0% 95.0% 90.0% 6V 85.0% 12 V 80.0% Efficiency Efficiency 85.0% 50 90.0% 9V 85.0% 12 V 80.0% 13.8 V 13.8 V 75.0% 75.0% 70.0% 70.0% 65.0% 65.0% 5 12.5 25 37.5 Output Current (A) 50 5 12.5 25 37.5 50 Output Current (A) Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input Jan. 21, 2010 0.6 Vdc - 5.0 Vdc/50 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. Thermal Derating Curves The thermal reference point Tref is shown above. For reliable operation this temperature should not exceed 115C. The output power of the module should not exceed the rated power for the module. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input 0.6 Vdc - 5.0 Vdc/50 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. Jan. 21, 2010 Thermal Derating Curves (continued) Vin=12 V, Vo=0.6 V Vin=12 V, Vo=1.8 V Vin=12 V, Vo=3.3 V Vin=12 V, Vo=1.2 V Vin=12 V, Vo=2.5 V Vin=12 V, Vo=5.0 V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input 0.6 Vdc - 5.0 Vdc/50 A Output Jan. 21, 2010 Bel Power Inc., a subsidiary of Bel Fuse Inc. Ripple and Noise Waveforms 12 Vdc input, 0.6 Vdc/50 A output 12 Vdc input, 1.2 Vdc/50 A output 12 Vdc input, 1.8 Vdc/50 A output 12 Vdc input, 2.5 Vdc/50 A output 12 Vdc input, 3.3 Vdc/50 A output 12 Vdc input, 5.0 Vdc/50 A output Note: Ripple and noise at full load, 0-20 MHz BW, with a 10 uF and a 1uF ceramic cap at the output, and Ta=25 deg C. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input 0.6 Vdc - 5.0 Vdc/50 A Output Jan. 21, 2010 Bel Power Inc., a subsidiary of Bel Fuse Inc. Transient Response Waveforms Vout= 0.6 V 0%-50% Load Transient Vout=0.6 V 50%-0% Load Transient Vout=1.2 V 0%-50% Load Transient Vout=1.2 V 50%-0% Load Transient Vout=1.8 V 0%-50% Load Transient Vout=1.8 V 50%-0% Load Transient Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input 0.6 Vdc - 5.0 Vdc/50 A Output Jan. 21, 2010 Bel Power Inc., a subsidiary of Bel Fuse Inc. Transient Response Waveforms (continued) Vout= 2.5 V 0%-50% Load Transient Vout=2.5 V 50%-0% Load Transient Vout=3.3 V 0%-50% Load Transient Vout=3.3 V 50%-0% Load Transient Vout=5 V 0%-50% Load Transient Vout=5 V 50%-0% Load Transient Note: Transient response at di/dt = 10 A/uS, with extemal electrolytic cap 4700 uF, and Ta=25 deg C. . Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input Jan. 21, 2010 0.6 Vdc - 5.0 Vdc/50 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. Mechanical Outline 0RP2-50E1Ax Pin Connections Pin Function Pin Function 1 2 3 4 5 6 7 8 Vout Vout Vout 9 10 11 12 13 14 15 PwGOOD SenseSense+ Vin Vin GND GND GND GND Enable TrimTrim+ Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input 0.6 Vdc - 5.0 Vdc/50 A Output Jan. 21, 2010 Bel Power Inc., a subsidiary of Bel Fuse Inc. Mechanical Outline (continued) VRP2-50E1Ax Pin Connections Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Function Vout Vout Vout GND GND Enable TrimTrim+ PwGOOD SenseSense+ Vin Vin GND GND Note: This module is recommended and compatible with Pb-Free Wave Soldering and must be soldered using a peak solder temperature of no more than 260 ºC for less than 5 seconds. Note: 1) All Pins: Material - Copper Alloy; Finish – 3 micro inches minimum Gold over 50 micro inches minimum Nickel plate. 2) Undimensioned components are shown for visual reference only. 3) All dimensions in inches (mm); Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm). Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 5 Vdc - 13.8 Vdc Input 0.6 Vdc - 5.0 Vdc/50 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. Jan. 21, 2010 Revision History Date Revision 2010-1-21 H Changes Detail Approval 1. Change to Bel new datasheet format; 2. Add new part number “xRP2-50E1A1” YF Sun RoHS Compliance Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. 2010 Bel Fuse Inc. Specifications subject to change without notice. 012110 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F/ 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com