BT331 700-2700 MHz 1.5~2.0W Power Amplifier Device Features Preliminary Datasheet OIP3 = 52.0 dBm @ 1900 MHz Gain = 19.8 dB @ 900 MHz Output P1 dB = 33.2 dBm @ 1900 MHz 50 Ω Cascadable Highly Reliable InGaP/GaAs HBT Technology Lead-free/RoHS-compliant SOIC-8 SMT package Product Description YY = Year, WW = Work week, XX = Wafer Number Typical Performance1 BeRex’s BT331 is a high power and a high dynamic range amplifier in a low cost surface mount package(SOIC-8) with a RoHScompliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices fabricated with InGaP GaAs technology. This device is designed for use where high linearity is required and features high OIP3 and Power with low consumption current (400mA) and requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port. Parameter Frequency 900 1900 2140 Unit 2450 2600 MHz Gain 19.8 14.0 13.2 12.1 12.1 dB S11 -16.7 -22.6 -20.7 -23.0 -19.0 dB S22 -10.6 -13.5 -11.7 -10.0 -12.7 dB 2 OIP3 P1dB 49.0 32.0 52.0 33.2 52.0 32.6 47.5 32.0 47.0 31.2 dBm dBm IS-95C ACPR 23.3 - - - - dBm WCDMA ACLR 4.8 23.3 5.0 23.4 5.0 21.5 5.3 21.5 5.4 dBm dB Noise Figure 1 Device performance is measured on a BeRex evaluation board at 25°C, 50 Ω system. 2 OIP3 is measured with two tones at an output of 20 dBm per tone separated by 1 MHz. *ACPR CH Power is measured at 55dBc, ACLR CH Power is measured at 50dBc. *ACPR Test set-up: IS-95 CDMA, 9Ch. FWD, +885KHz offset, PAR 9.7dB at 0.01% Prob. *ACLR Test set-up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset, PAR 10.34 at 0.01% Prob. Applications Min. Base station Infrastructure Commercial/Industrial/Military wireless system Application Circuits Vcc Bypass RF Choke RF In RF Out BT331 DC Block DC Block *external matching circuit: refer to the page 4 to 16. Bandwidth IC @ (Vc = 5V) VC RTH 700 360 Typical 400 5.0 10.0 Max. Unit 2700 440 MHz mA V °C/W Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 Unit °C °C °C +5.5 900 28 V mA dBm *Operation of this device above any of these parameters may result in permanent damage. BeRex ● website: www.berex.com ● email: [email protected] 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet V-I Characteristics BeRex SOT89 Evaluation Board *Dielectric constant is 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=400mA, T=25°C) BeRex ● website: www.berex.com ● email: [email protected] 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 1.5~2.0W Power Amplifier S-Parameter Preliminary Datasheet (Vdevice = 5.0V, Icc = 400mA, T = 25 °C, calibrated to device leads) BeRex Freq [MHz] S11 [Mag] S11 [Ang] S21 [Mag] S21 [Ang] S12 [Mag] S12 [Ang] S22 [Mag] S22 [Ang] 100 500 1000 1500 2000 2500 3000 3500 0.919 0.949 0.941 0.929 0.895 0.847 0.735 0.757 -155.332 168.743 156.029 143.815 131.767 120.721 118.042 125.918 27.202 4.153 2.065 1.444 1.226 1.393 2.132 2.326 171.888 90.122 78.875 71.101 65.133 57.189 32.334 -38.115 0.011 0.010 0.011 0.016 0.019 0.024 0.024 0.007 81.778 35.600 47.384 48.347 50.235 47.782 2.709 -11.874 0.335 0.805 0.833 0.840 0.838 0.839 0.848 0.904 151.426 -179.714 170.693 163.704 158.159 153.001 147.516 140.189 4000 0.910 122.065 0.796 -127.288 0.014 66.759 0.495 79.167 ● website: www.berex.com ● email: [email protected] 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 900 MHz Preliminary Datasheet Schematic Diagram R1 C7 Vcc C6 C9 R2 C3 C4 C5 C8 C1 C10 RF_IN BeRex L2 C11 1 8 2 7 3 6 4 5 Toleranc BOM L1 RF_OUT C2 C12 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 L1 L2 R1 R2 1680 1608 1608 1608 1608 3216 1608 1608 1608 1608 1608 1608 1608 1608 PCB Diagram 100pF 100pF 100pF 1nF 1uF 10uF NC NC 1pF 3.3pF 10pF 8pF 18nH 8.2nH 4.3KΩ 100Ω ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Notice 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt Inductor (L2) and the input pin of BT331 is 6.45 mm. 3. Distance between the center of the shunt cap.(C11) and the input pin of BT331 is 1.5 mm. 4. Distance between the center of the shunt cap.(C12) and the output pin of BT331 is 8.25 mm. ● website: www.berex.com ● email: [email protected] 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 1900 MHz Preliminary Datasheet Schematic Diagram R1 C7 Vcc C6 C9 R2 C3 C4 C5 C8 C1 C10 RF_IN BeRex C13 C11 1 8 2 7 3 6 4 5 Toleranc e BOM L1 RF_OUT C2 C12 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 L1 R1 R2 1680 1608 1608 1608 1608 3216 1608 1608 1608 1608 1608 1608 1608 1608 1608 PCB Diagram 100pF 100pF 100pF 1nF 1uF 10uF NC 2pF 10pF 3pF 0.5pF 2.7pF 2.5pF 56nH 4.3KΩ 100Ω ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Notice 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap.(C13) and the input pin 1 of BT331 is 5.25 mm. 3. Distance between the center of the shunt cap.(C11) and the input pin of BT331 is 1.5 mm. 4. Distance between the center of the shunt cap.(C12) and the output pin of BT331 is 2.25 mm. ● website: www.berex.com ● email: [email protected] 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 2140 MHz Preliminary Datasheet Schematic Diagram R1 C7 Vcc C6 C9 R2 C3 C4 C5 C8 C1 C10 RF_IN BeRex C13 C11 1 8 2 7 3 6 4 5 Toleranc e BOM L1 RF_OUT C2 C12 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 L1 R1 R2 1680 1608 1608 1608 1608 3216 1608 1608 1608 1608 1608 1608 1608 1608 1608 PCB Diagram 100pF 100pF 100pF 1nF 1uF 10uF NC 5pF 2.5pF 1.8pF 0.5pF 2pF 2pF 22nH 5.6KΩ 100Ω ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Notice 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap.(C13) and the input pin of BT331 is 5.25 mm. 3. Distance between the center of the shunt cap.(C11) and the input pin of BT331 is 1.5 mm. 4. Distance between the center of the shunt cap.(C12) and the output pin of BT331 is 2.25 mm. ● website: www.berex.com ● email: [email protected] 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 2450 MHz Preliminary Datasheet Schematic Diagram R1 C7 Vcc C6 C9 R2 C3 C4 C5 C8 C1 C10 RF_IN BeRex C13 C11 1 8 2 7 3 6 4 5 Toleranc e BOM L1 RF_OUT C2 C12 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 L1 R1 R2 1680 1608 1608 1608 1608 3216 1608 1608 1608 1608 1608 1608 1608 PCB Diagram 100pF 100pF 100pF 1nF 1uF 10uF NC NC NC 1pF 0.5pF 1.8pF 1pF 5.7nH 5.6KΩ 100Ω ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Notice 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap.(C13) and the input pin of BT331 is 6.0 mm. 3. Distance between the center of the shunt cap.(C11) and the input pin of BT331 is 1.5 mm. 4. Distance between the center of the shunt cap.(C12) and the output pin of BT331 is 2.5 mm. ● website: www.berex.com ● email: [email protected] 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 14 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 15 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 2600 MHz Preliminary Datasheet Schematic Diagram R1 C7 Vcc C6 C9 R2 C3 C4 C5 C8 C1 C10 RF_IN BeRex C13 C11 1 8 2 7 3 6 4 5 Toleranc e BOM L1 RF_OUT C2 C12 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 L1 R1 R2 1680 1608 1608 1608 1608 3216 1608 1608 1608 1608 1608 1608 1608 1608 1608 PCB Diagram 100pF 100pF 100pF 1nF 1uF 10uF NC 5pF 2.5pF 1pF 0.5pF 1.8pF 1pF 5.7nH 5.6KΩ 100Ω ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Notice 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap.(C13) and the input pin of BT331 is 5.25 mm. 3. Distance between the center of the shunt cap.(C11) and the input pin of BT331 is 1.5 mm. 4. Distance between the center of the shunt cap.(C12) and the output pin of BT331 is 1.5 mm. ● website: www.berex.com ● email: [email protected] 16 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 17 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 18 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Package Outline Dimension BeRex ● website: www.berex.com ● email: [email protected] 19 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A BT331 700-2700 MHz 1.5~2.0W Power Amplifier Suggested PCB Land Pattern and PAD Layout Preliminary Datasheet PCB Land Pattern PCB Mounting Note : All dimension are in millimeters PCB lay out _ on BeRex website Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Class 2 Value: Passes <4000V Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114B MSL Rating: Level 3 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 NATO CAGE code: 2 BeRex N 9 6 F ● website: www.berex.com ● email: [email protected] 20 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. A