IAD110P Integrated Telecom Circuits Load Voltage Load Current Max RON IAD110P 350 100 35 Units V mA Ω Features • Three Functions in One Package • Small 16 Pin SOIC Package (PCMCIA Compatible) • Bi-Directional Current Sensing • Bi-Directional Current Switching • Replaces up to Three or Four Components • 3750VRMS Input/Output Isolation • FCC Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Tape & Reel Versions Available Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Description The IAD110P Multifunction Telecom switch combines a 350V Form A relay and two optocouplers in a single package. The relay uses optically coupled MOSFET technology to provide 1500V of input to output isolation. The efficient MOSFET switch and photovoltaic die uses Clare’s patented OptoMOS architecture. The optically coupled input uses highly efficient GaAIAs infrared LEDs. IAD110P’s allow telecom circuit designers to combine three discrete functions in a single component. The IAD110P’s small package uses less space than traditional discrete component solutions. Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-12 • VDE Compatible • BSI Certified: • BS EN 60950:1992 (BS7002:1992) Certificate #:7969 • BS EN 41003:1993 Certificate #:7969 Ordering Information Part # IAD110P IAD110PR Description 16 Pin SOIC (50/Tube) 16 Pin SOIC (1000/Reel) IAD110 Pinout Pin Configuration (N/C) Switching Characteristics of Normally Open (Form A) Devices 10ms 16 2 15 (Form A) 3 14 4 13 5 12 6 11 7 10 8 9 (N/C) CONTROL + 90% LOAD 10%+ 10%+ TON (N/C) TOFF Switching Characteristics of Normally Closed (Form B) Devices 10ms CONTROL 90% + + 90% +10% TOFF DS-IAD110P-R2 1 www.clare.com TON 1. (N/C) 2. + LED - Relay Input 3. – LED - Relay Input 4. Emitter - Phototransistor #1 5. Collector - Phototransistor #1 6. Emitter - Phototransistor #2 7. Collector - Phototransistor #2 8. (N/C) 9. LED - Phototransistor +/– #2 10. LED - Phototransistor –/+ #2 11. LED - Phototransistor +/– #1 12. LED - Phototransistor –/+ #1 13. (N/C) 14. Output - Relay 15. Common - Relay 16. Output - Relay 1 IAD110P Absolute Maximum Ratings (@ 25˚ C) Parameter Total Package Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature (10 Seconds Max.) 1 Min 3750 -40 -40 - Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units 11 W - VRMS +85 °C +125 °C +220 °C Above 25˚ derate linerity 1.67mw/˚C Electrical Characteristics Parameter Relay Portion Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) Peak Load Current On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Relay Portion Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Detector Portion Output Characteristics @ 25°C Phototransistor Blocking Voltage Phototransistor Dark Current Saturation Voltage Current Transfer Ratio Detector Portion Input Characteristics @ 25°C Input Control Current Input Voltage Drop Input Current (Detector must be off) Input to Output Capacitance Input to Output Isolation 2 Conditions Symbol Min Typ Max Units IL= 1µA 10ms IL=100mA VL=350V; TJ=25°C VL IL ILPK RON ILEAK - - 350 100 350 35 1 V mA mA Ω µA IF=5mA, VL =10V IF=5mA, VL=10V VL=50V, f=1MHz TON TOFF - - 25 3 3 - ms ms pF IL=100mA IL=1mA IF=5mA VR=5V IF IF VF VR IR 5 0.4 0.9 - 1.2 - 50 1.4 5 10 mA mA V V µA IC =10µA VCE=5V, IF =0mA IC=2mA, IF=16mA IF=6mA, VCE=0.5V BVCEO ICEO VSAT CTR 20 33 50 50 0.3 - 500 0.5 - V nA V % IC=2mA,VCE=0.5V IF=5mA IC=1µA, VCE=5V IF ICEO - 6 0.9 5 2 1.2 25 1.4 - mA V µA VL=50V, f=1MHz - CI/O VI/O 3750 3 - - pF VRMS www.clare.com Rev. 2 IAD110P PERFORMANCE DATA* IAD110P Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC, IF = 5mADC) 35 30 30 25 20 15 10 25 20 15 10 5 5 0 0 1.19 1.21 1.23 Device Count (N) 35 30 1.17 1.25 15 10 0 377.5 388.5 399.5 410.5 421.5 432.5 443.5 Blocking Voltage (V) On-Resistance (Ω) IAD110P Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC; IF = 5mADC) IAD110P Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) 25 25 20 20 20 15 10 5 0 Device Count (N) 25 Device Count (N) 15 10 5 0.65 0.91 1.17 1.43 1.69 1.95 0.39 0.65 0.91 LED Current (mA) 1.17 1.43 1.69 Load Current (mA) 20 15 10 5 0.3 0.45 180 0.016 160 0.014 140 120 100 20mA 10mA 5mA 80 60 0.55 -20 0 20 Turn-On (ms) 420 415 410 405 400 395 -20 0 20 40 40 60 80 100 0.008 0.006 0 120 -40 -20 0 60 Temperature (°C) 80 100 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 5mA 20mA -20 0 20 40 60 Temperature (°C) 40 60 80 100 IAD110P Typical Turn-Off vs. Temperature (Load Current = 100mADC) 10mA -40 20 Temperature (°C) 80 100 Turn-Off (ms) 425 3.9 0.010 IAD110P Typical Turn-On vs. Temperature (Load Current = 100mADC) 430 3.3 0.012 Temperature (°C) IAD110P Typical Blocking Voltage vs. Temperature 2.7 0.002 -40 0.65 2.1 0.004 40 Turn-Off (ms) -40 1.5 IAD110P Typical Leakage vs. Temperature (Measured across Pins 14 & 16 or 11 & 13) 0 0 0.35 0.9 Turn-On (ms) 20 0.25 5 1.95 IAD110P Typical Load Current vs. Temperature 25 0.15 10 LED Current (mA) IAD110P Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC; IF = 5mADC) 0.05 15 0 0 0.39 Leakage (µA) Device Count (N) 20 18.75 19.85 20.95 22.05 23.15 24.25 25.35 IAD110P Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) Blocking Voltage (VRMS) 25 5 LED Forward Voltage Drop (V) Device Count (N) IAD110P Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) 35 Device Count (N) Device Count (N) IAD110P Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C; IF = 5mADC) 1.000 0.900 0.800 0.700 0.600 0.500 0.400 0.300 0.200 0.100 0 -40 -20 0 20 40 60 5mA 80 100 Temperature (°C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 2 3 IAD110P PERFORMANCE DATA* IAD110P Typical LED Forward Voltage Drop vs. Temperature IAD110P Typical Turn-On vs. LED Forward Current (Load Current = 100mADC) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1.4 50mA 30mA 20mA 10mA 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 0.7 0.6 0.2 5 10 15 20 25 30 35 40 45 50 0 3.000 2.500 2.500 30 20 2.000 1.500 1.000 10 0.500 0 0 0 20 40 60 80 LED Current (mA) 3.000 40 0.5 1 1.5 2 0 20 3.0 40 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10µs 100µs 1ms 10ms 100ms Load Voltage (V) 60 80 40 45 50 1.000 -40 100 -20 0 20 40 60 80 100 Temperature (°C) IAD110P Typical Normalized CTR vs. Forward Current (VCE = 0.8V) 2.5 2.0 1.5 1.0 0.5 0 10s 100s 1s Time IAD110P Typical Normalized CTR vs. Temperature (VCE = 0.8V) 35 1.500 IAD110P Energy Rating Curve 2.5 30 2.000 Temperature (°C) Load Current (A) 100 80 60 40 20 0 -20 -40 -60 -80 -100 -2.5 -2 -1.5 -1 -0.5 0 25 0 -20 Temperature (°C) IAD110P Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C; IF = 5mADC) 20 0.500 -40 100 15 IAD110P Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC) IAD110P Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC) 50 -20 10 Forward Current (mA) 60 -40 5 LED Forward Current (mA) LED Current (mA) On-Resistance (Ω) 0.3 0 0 IAD110P Typical On-Resistance vs. Temperature (Load Current = 100mADC; IF = 5mA) Load Current (mA) 0.4 0.1 Temperature (°C) 0 2 4 6 8 10 12 14 16 18 20 IF (mA) IAD110P Typical Collector Current vs. Forward Current (VCE = 0.8V) 16 1mA 14 2.5 2mA 5mA 2.0 1.5 10mA 1.0 15mA 0.5 20mA 12 IC (mA) Normalized CTR (%) 0.5 Turn-Off (ms) Turn-On (ms) 1.6 Normalized CTR (%) LED Forward Voltage Drop (V) 1.8 IAD110P Typical Turn-Off vs. LED Forward Current (Load Current = 100mADC) 10 8 6 4 0 -40 -20 0 20 40 60 Temperature (°C) 80 100 2 0 0 2 4 6 8 10 12 14 16 18 20 IF (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 2 IAD110P Mechanical Dimensions 16 Pin SOIC (“P” Suffix) 1.981 TYP. (.078) 2.108 MAX. (.083) 1.270 TYP. (.050) 7.493 ± .051 (.295 ± .002) 7.493 ± .127 (.295 ± .005) 1.016 (.040) PC Board Pattern (Top View) 10.160 ± .051 (.400 ± .002) 1.270 (.050) 10.363 ± .127 (.408 ± .005) 9.728 ± .051 (.383 ± .002) .254 (.010) 1.193 (.047) .406 TYP. (.016) 8.890 TYP. (.350) .787 (.031) Tape and Reel Packaging for 16 Pin SOIC Package 330.2 DIA. (13.00) 6.731 MAX. (.265) Top Cover Tape Thickness .102 MAX. (.004) 1.753 ± .102 (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 16 10.693 ± .025 (.421 ± .001) 12.090 (.476) 3.175 (.125) Top Cover Tape Embossed Carrier Embossment 16.002 ± .305 (.630 ± .012) .050R TYP. 11.989 ± .102 (.472 ± .004) 10.897 ± .025 (.429 ± .001) 1.549 ± .102 (.061 ± .004) User Direction of Feed Dimensions mm (inches) Rev. 2 5 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA/PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-IAD110P-R2 ©Copyright 2000, Clare, Inc. All rights reserved. Printed in USA. 3/23/01