6 5 4 3 2 1 USB 2.0 Type A Female/Female Adaptor D 19.5 34.45 REF. 26.60 `0.05 8.4 D Receptacle Housing Die-Cast Version Bayonet locking Type n28.10 `0.05 Recommended Panel Cutout Panel Gasket C C Panel Nut (M28 x 1.5) n34 3.5 32 2 Notes: 1. Electrical Specifications: - Meets USB 2.0 Specification - Contact Resistance: 30 mOhm max. - Insulation Resistance: 1000 MOhm min. @ 100 VDC 9.8 29.7 - Operating Temperature: -40~C to +85~C Pin-Assingment 2. Material and Finish: Type A F Type A F - Receptacle Housing: Zinc Die-Cast, Nickel Plated Pin1 --------Pin1 - Panel Nut: Brass, Nickel Plated Pin2 --------Pin2 - Panel Gasket: Silicone, Color: White Pin3 --------Pin3 - USB Adaptor Insulator: PBT, UL94 V-0, Black Pin4 --------- Pin4 - USB Adaptor Metal Shell: Copper Alloy, Nickel Plated Shell--------- Shell - USB Adaptor Overmold: PBT UL94 V-0, Black - USB Contacts: Copper Alloy, Finish: 30 u" Gold min. over Nickel 3. Connector can be front or rear mounted to a maximum panel thickness of 3.2 mm. 4. RoHS compliant 5. IP67 rated when fully mated with appropriate mating connector 6 B 36.18 Max. 5 4 Directive 2002/95/EC "RoHS" Compliant DOT NOT ALTER CAD DRAWING BY HAND A - Current Rating: 1.5 A max. at 25~C - Working Voltage: 30 V (RMS) max. - DWV: 500 VAC/60s at sea level THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC CORPORATION B Customer: Name Tolerance Title Approval Date 0 PLC 1 PLC 2 PLC 3 PLC ANGLES `0.50 `0.38 `0.25 `0.10 Autodesk Inventor `3~ Material: See Notes Title: 2010 Date Name Draw. Mar. 16 Vincent Ke Appd. Mar. 16 J. Chaudry D-old R original Rev. 3 Changes Date IP67 USB Receptacle Assembly Kit A with USB 2.0 Type A F/F Adaptor Zinc Die-Cast Version Norm a Dim. in mm Scale: 1.5:1 Unless otherwise specified DIN Drawing No.: 17K1A155 A3 Sheet Part No.: 17-200601 Name 2 1/1 1