Technical specification: A 7/8" - UN16 10 n1 3 A PE 3 4 2 4 5 1 2 1 A 4,8 n9,1 2,7 kV Current rating: IEC 60512-3 at 40°C 12 A Insulation resistance: IEC 60512 >=100 M Pollution degree: IEC 60664-1 3/2 Degree of protection: IEC 60529 IP 67, in mated condition Temperature range: IEC 60664-1 -30°C ... +85°C Mating cycles: IEC 60512-9a >=100 Contact: CuZn Contact plating: Nickel, gold plated Contact carrier: TPU, UL 94 Sealing: FPM Socket housing: CuZn, nickel plated Counternut: CuZn, nickel plated ° 1, 2 5,84 6x 60 n3,5 +0 - 0 ,1 +0 - 0, 1 ,9 n2 - 0,1 n2,9 + 0 ,2 Pin layout PCB n 22,4`0,1 n1 20,25 `0,1 +0 - 0,1 n2,9 + 0 n3,5 - 0,1 8 6,6 n 3, 5 n + -00 ,1 1, 2 Overvoltage: IEC 60664-1 4pos+PE 5,3 n 2 Materials: 2 A 4pos 2pos+PE Overvoltage category: IEC 60664-1 20,2 `0,1 PE 300 V Ω Sealing 21,6 17,6 Width across flats 27 Rated voltage: IEC 60664-1 20,25 `0,1 Minimum wall thickness 2,5mm, alternativ panel cut-out d=22,4 20,25 `0,1 Pin layout PCB Pin layout PCB 18,3 25° 75° Outline Contact Carrier 12 Directive 2002/95/EC RoHS compliant DO NOT ALTER CAD DRAWING BY HAND Ø24 Index: c 10.02.11 fro Ä3906 date drawn 19.01.09 appd. THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 19.01.09 Description: Pos 41-40048 SAL - 7/8 - FSH2PE - X10 3 41-40049 SAL - 7/8 - FSH4 - X10 4 41-40050 SAL - 7/8 - FSH4PE - X10 5 title: dim. in mm Technical specification changed, data sheet revised Part no: Male socket 7/8" with dip solder, backmounting name Fromm dwg no: W.Schmidt 41K1A391 R part no: