200 Watt, 5.85 - 7.10 GHz, CW traveling wave tube, periodic-permanent-magnet focused, coaxial input, waveguide output, conduction cooled. Custom configurations are also available. These variations in the performance and configuration include: mechanical configuration, electrical and RF connections, and dual-stage depressed collector. Features •200 Watt •Coaxial Input •Waveguide Output •Weight: 7.5 lbs. max •Conduction Cooled model Frequency (GHz) 5.85 - 7.10 VTC-6265M3 Power output (min) 200 W TYPICAL OPERATING PARAMeters MAXIMUM MINIMUM Filament Voltage:6.6 6.0 Filament Current:5 --- Helix Voltage:9.2 7.6 Helix Current:15 --- Collector Voltage 1:.52 Ew .48 Ew Collector Current 1: 140 --- Cathode Current: 240 --- Collector Voltage 2: .34 Ew 30 Ew Collector Current 2: 240 --- Cathode Warm-up Time:--- 3 Drive Power: 10 --- Baseplate Temp: 120 --- Prime Power:--- --- Load VSWR: 1.5:1 --- TYPICALUNITS --- Vdc ---A --- kVdc --- mAdc --- kVdc --- mAdc --- mAdc --- kVdc --- mAdc --- Minutes --- mW --- °C --- Watts --- VSWR The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303 telephone: 1(800) 414-8823. fax : (650) 856-0705 | email : [email protected] CPI0509 CPI | VTC-6265M3, 4CW50,000J 200 W, C-band helix twt VTC-6265M3, 200 W, C-Band Helix TWT